Loading...

Acura Cl Stabilizer Bar Link Bushings

Acura Cl Stabilizer bar link bushings

Stabilizer bar link bushings for your Acura Cl start at low prices, and AutoBuffy stocks multiple options from top OE-quality brands. These small rubber or polyurethane sleeves isolate the stabilizer bar end links from the chassis, absorbing vibration and controlling lateral body roll. When they crack or collapse, handling becomes imprecise and a persistent clunking noise develops over bumps.

Signs your Acura Cl needs new stabilizer bar link bushings

  • Clunking or rattling noise from the front or rear suspension when driving over speed bumps, potholes, or rough pavement
  • Knocking sound that changes intensity with vehicle speed or road surface texture but disappears on smooth roads
  • Increased body roll or a vague, wandering feeling when cornering at normal speeds
  • Visible cracking, splitting, or complete collapse of the rubber bushing sleeve when inspected from below
  • Metallic contact noise caused by the stabilizer bar making direct contact with the bracket after bushing failure
  • Uneven or accelerated tire wear on one side, resulting from the stabilizer bar no longer centering properly

Which stabilizer bar link bushing should you buy for your Acura Cl?

The main decision is material: OE-style rubber bushings restore factory ride quality and noise isolation, while polyurethane bushings offer greater durability and sharper handling at the cost of slightly more road noise. You also need to match the bushing to the correct bar diameter and position — front versus rear — since these differ by vehicle.

OE Rubber Replacement
Best for
Daily drivers prioritizing a quiet, stock-feel ride
What you get
Factory-matched compliance, good noise absorption, straightforward installation
Polyurethane Bushing
Best for
Performance or spirited driving, high-mileage vehicles needing longer service life
What you get
Greater resistance to cracking and deformation, firmer handling response, may require periodic greasing
Front Stabilizer Bar Link Bushing
Best for
Addressing clunking or roll on the front axle of your Acura Cl
What you get
Correct diameter and bracket geometry for front bar mounting points
Rear Stabilizer Bar Link Bushing
Best for
Addressing rear body roll or noise on independent rear suspension layouts
What you get
Rear-specific fit ensuring proper bar centering and load transfer

Replacing stabilizer bar link bushings on a Acura Cl

Easy⏱ 30–90 minutesSocket set and ratchetCombination wrench setPenetrating oil (for corroded fasteners)Pry bar or bushing removal toolJack and jack stands or a vehicle lift

Safely raise and support the Acura Cl, then remove the bracket bolt or end link nut to free the stabilizer bar at the affected location and slide out the old bushing. Press or work the new bushing into position, confirming it seats flush and is oriented correctly before reinstalling and snugging the hardware to specification. Torque all fasteners with the suspension at ride height to prevent premature bushing bind and wear.

Frequently asked questions

How much does it cost to replace stabilizer bar link bushings on a Acura Cl?
Parts start at low prices at AutoBuffy. A full DIY job typically costs only the parts price, while a shop will add one to two hours of labor on top. Replacing bushings at the same time as end links or ball joints can reduce total labor cost since the suspension is already disassembled.
How long do stabilizer bar link bushings last on a Acura Cl?
OE rubber bushings generally last several years under normal driving conditions, but exposure to road salt, oil contamination, and extreme heat accelerates cracking and hardening. Vehicles driven frequently on rough roads or in regions with harsh winters often see bushing degradation sooner than those driven on smooth, dry roads.
Can I drive my Acura Cl with worn stabilizer bar link bushings?
Short-term driving is possible, but it is not advisable. A failed bushing allows the stabilizer bar to move excessively, which increases body roll and reduces steering predictability. Over time, the uncontrolled movement can wear end links, damage bracket mounting points, and create a safety hazard during emergency maneuvers.
Are stabilizer bar link bushings the same as sway bar bushings on a Acura Cl?
These terms refer to related but distinct components. Stabilizer bar link bushings are the small sleeves inside or around the end links that connect the bar to the suspension. Sway bar frame bushings are the larger mounts that clamp the bar to the chassis. Both should be inspected together since symptoms can overlap.
Do I need to replace stabilizer bar link bushings in pairs on a Acura Cl?
Replacing bushings in axle pairs is strongly recommended. Both sides experience the same age, mileage, and road conditions, so if one side has failed, the other is typically close behind. Replacing only one side can lead to uneven handling and a return trip for the other bushing within a short period.
Is replacing stabilizer bar link bushings a DIY job on a Acura Cl?
Most mechanically confident home technicians can complete this job with basic hand tools and a vehicle lift or sturdy jack stands. The main challenge is removing fasteners that are corroded or seized, which is common on older vehicles. Allowing penetrating oil to soak the hardware beforehand significantly reduces the difficulty.

More parts for your Acura Cl

HVAC Blower MotorHVAC Blower Motor Resistor ConnectorEngine Mount KitCoil Spring InsulatorManifold Absolute Pressure Sensor ConnectorWiper Blade SetIgnition SwitchEngine Timing Belt Tensioner Adjuster

Stabilizer bar link bushings for other Acura models

Acura TLAcura IntegraAcura VigorAcura Legend