Loading...

Acura Rsx Ball Joint Sets

Acura Rsx Ball joint sets

Ball joint sets for the Acura Rsx start at $148.95 and AutoBuffy stocks 2 options from brands including Mevotech Supreme. Ball joints are the pivot points connecting your control arms to the steering knuckle, letting the suspension move while keeping the wheels aligned. When they wear out, handling becomes unpredictable and tire wear accelerates rapidly.

Signs your Acura Rsx needs new ball joints

  • Clunking or knocking noise from the front suspension when hitting bumps, turning, or accelerating
  • Steering wheel vibrates or feels loose, especially at highway speeds
  • Uneven or rapid tire wear on the inner or outer edges of the front tires
  • Vehicle pulls to one side without steering input, even on a flat, straight road
  • Visible play or wobble in the front wheel when lifted off the ground and rocked at 12 and 6 o'clock
  • Front end drifts or wanders during lane changes, requiring constant steering correction

Which ball joint set should you buy for your Acura Rsx?

The main decisions are position (upper vs. lower), construction quality, and whether the joint is greaseable or sealed for life. Lower ball joints are load-bearing on most vehicles and wear faster, so quality matters most there. Match the joint type — press-in, bolt-in, or screw-in — to whatever your Acura Rsx uses from the factory.

OE-Replacement (sealed)
Best for
Daily drivers wanting a direct, no-maintenance swap
What you get
Factory-equivalent sealed grease pocket, straightforward installation, predictable lifespan
Greaseable Performance
Best for
High-mileage vehicles or drivers who do their own maintenance
What you get
Zerk fitting for periodic greasing, extended service life, better value long-term
Upper Ball Joint Set
Best for
Vehicles with double-wishbone suspension needing upper pivot renewal
What you get
Restores proper caster and camber geometry at the upper control arm pivot point
Complete Upper + Lower Kit
Best for
Vehicles with significant overall front-end wear or after an accident
What you get
Both positions replaced together, eliminates mismatched wear, single labor event

Ball joint sets brands we stock for your Acura Rsx

Mevotech Supreme
2 options · from $148.95

Replacing ball joints on a Acura Rsx

Advanced⏱ 2–4 hours per sideHydraulic floor jack and jack standsBall joint press or pickle forkBreaker bar and socket setTorque wrenchTie rod separator or joint separator

Start by safely lifting and supporting the Acura Rsx, removing the wheel, and disconnecting the brake caliper and rotor to access the knuckle. A ball joint press is required for most press-in applications — a pickle fork works for removal but damages the boot, so use it only on joints being discarded. After installation, have the front end aligned before returning the vehicle to normal use, as ball joint replacement always shifts suspension geometry.

Frequently asked questions

How much does it cost to replace ball joints on a Acura Rsx?
Parts for a Acura Rsx ball joint set start at $148.95 at AutoBuffy. Total cost including professional labor typically runs higher, as pressing out and installing ball joints requires a hydraulic press and alignment afterward. Doing the work yourself with the right tools keeps the cost closer to the part price alone.
How long do ball joints last on a Acura Rsx?
Ball joints on the Acura Rsx generally last somewhere between 70,000 and 150,000 miles, though this varies widely with driving conditions. Gravel roads, potholes, and off-road use accelerate wear significantly. Sealed joints require no maintenance; greaseable joints last longer when serviced on schedule at every oil change.
Can I drive my Acura Rsx with a bad ball joint?
No — a worn ball joint on your Acura Rsx is a safety risk and should not be driven on. A failed ball joint can separate suddenly, causing the wheel to collapse inward and total loss of steering control. If you hear clunking or notice handling changes, have it inspected immediately before driving further.
Do I need an alignment after replacing ball joints on my Acura Rsx?
Yes. Replacing ball joints on your Acura Rsx directly affects caster and camber angles, so a four-wheel alignment is required after installation. Skipping the alignment will cause rapid, uneven tire wear and pulling. Budget for an alignment appointment when planning the repair — it is not optional.
Should I replace upper and lower ball joints at the same time on my Acura Rsx?
It is strongly recommended. If one ball joint on your Acura Rsx is worn, the others have likely accumulated similar mileage and stress. Replacing the full set in a single labor event saves money on future shop time, ensures balanced handling, and avoids a repeat alignment cost within a short period.
How do I know if my Acura Rsx has press-in or bolt-in ball joints?
Check whether the ball joint sits inside the control arm housing or attaches with bolts through the arm. Press-in joints require a hydraulic press to remove and install, making them a more advanced DIY job. Bolt-in joints use fasteners only and are significantly easier to swap at home with basic hand tools.

Shop ball joint sets by year for the Acura Rsx

20032002

More parts for your Acura Rsx

Strut Bumper & Bellows KitRadiator Coolant HoseFuel Injection Plenum Gasket SetMulti-Purpose Electrical ConnectorWheel Bearing & Hub SetHornLiftgate Lift SupportRadiator Cap

Ball joint sets for other Acura models

Acura LegendAcura CSXAcura RDXAcura ILXAcura TSXAcura MDX