Loading...

Acura Tsx Suspension Strut Mount Brackets

Acura Tsx Suspension strut mount brackets

Suspension strut mount brackets for your Acura Tsx start at low prices, and AutoBuffy stocks multiple options from top OE-quality brands. The strut mount bracket bolts the strut assembly to the vehicle's body or frame, transferring road loads while isolating noise and vibration. When it cracks, bends, or corrodes, handling becomes unpredictable and structural damage can follow.

Signs your Acura Tsx needs a new suspension strut mount bracket

  • Clunking or knocking noise from the front or rear suspension when hitting bumps or turning
  • Visible cracks, bends, or rust perforation on the bracket itself during a visual inspection
  • Strut sits at an abnormal angle or feels loose when the wheel is rocked by hand
  • Uneven or accelerated tire wear indicating the wheel alignment has shifted
  • Steering pulls to one side without input, especially after hitting a pothole
  • Vibration transmitted directly into the cabin that worsens over rough pavement

Which suspension strut mount bracket should you buy for your Acura Tsx?

The main decision is between OE-equivalent stamped steel brackets and heavier-duty or reinforced aftermarket options. Position matters too — front and rear brackets are not interchangeable, and driver-side and passenger-side brackets are typically mirror-image pieces sold separately. Match the bracket to your driving conditions and how long you plan to keep the vehicle.

OE-Replacement (Stamped Steel)
Best for
Daily drivers keeping stock ride quality
What you get
Direct bolt-on fit, factory dimensions, standard corrosion coating
Reinforced Aftermarket (Thicker Gauge Steel)
Best for
Vehicles driven on rough roads or with frequent heavy loads
What you get
Increased material thickness for improved fatigue resistance, same mounting points
Complete Strut Mount Kit (bracket + bearing plate + insulator)
Best for
High-mileage vehicles where surrounding hardware is also worn
What you get
All worn components replaced at once, reduces comeback labor
Performance/Track-Oriented Bracket
Best for
Modified vehicles or drivers prioritizing handling precision over ride comfort
What you get
Tighter tolerances, often includes camber adjustment slots for alignment tuning

Replacing a suspension strut mount bracket on a Acura Tsx

Moderate⏱ 1.5–3 hours per sideFloor jack and jack standsSocket set and breaker barSpring compressor (if removing strut spring)Pry bar or trim removal toolTorque wrench

Replacing the strut mount bracket requires supporting the vehicle safely, removing the wheel, and unbolting the strut assembly from both the knuckle and the top mount to free the bracket. On most Acura Tsx applications the strut must be partially or fully disassembled to access all bracket fasteners, making a proper spring compressor essential for safety. After installation, have the wheel alignment checked and adjusted before returning to normal driving.

Frequently asked questions

How much does it cost to replace suspension strut mount brackets on a Acura Tsx?
Parts for your Acura Tsx start at low prices at AutoBuffy. A single bracket is generally the most affordable component in the strut assembly. If you're paying a shop, labor typically adds one to two hours per corner. Replacing the bracket while the strut is already out saves significant labor cost.
Can I drive my Acura Tsx with a damaged strut mount bracket?
You should not drive on a cracked or severely corroded strut mount bracket. The bracket anchors the strut to the vehicle's body, and a failure can cause the strut to collapse or shift, resulting in sudden loss of steering control. Short, slow trips to a shop may be unavoidable, but further driving risks both safety and additional structural damage.
Do I need to replace both sides at the same time on my Acura Tsx?
It is strongly recommended to replace strut mount brackets in pairs on the same axle. If one bracket has failed due to age or corrosion, the opposite side is likely at a similar wear stage. Replacing only one side can create an imbalance in suspension geometry that causes the Acura Tsx to pull and wears tires unevenly.
Will a bent or cracked strut mount bracket affect wheel alignment on my Acura Tsx?
Yes, directly. The strut mount bracket positions the top of the strut, which determines camber and caster angles. A deformed bracket shifts those angles outside of specification, causing the Acura Tsx to pull, wear tires on one edge, and handle inconsistently. A four-wheel alignment check is always necessary after replacing this bracket.
Is a suspension strut mount bracket the same as a strut mount or bearing plate?
No, these are separate components. The strut mount bracket is the rigid steel piece that bolts to the body or frame to anchor the strut. The strut mount or bearing plate sits on top of the strut and includes a rubber isolator and sometimes a bearing. They work together but are sold and replaced independently.
How many suspension strut mount bracket options does AutoBuffy carry for my Acura Tsx?
AutoBuffy stocks multiple suspension strut mount brackets for the Acura Tsx, sourced from top OE-quality brands. Use the year, make, and model filter at checkout to see only the confirmed-fit options for your specific configuration. If you need help narrowing down, the fitment guarantee covers direct bolt-on replacements.

More parts for your Acura Tsx

Power Brake BoosterAir Bag ClockspringElectric Fuel PumpControl Arm & Ball Joint AssemblyBrake Light Switch ConnectorEngine Variable Valve Timing (VVT) SprocketEngine Variable Valve Timing (VVT) Solenoid ConnectorRack & Pinion Bellows Kit

Suspension strut mount brackets for other Acura models

Acura ELAcura TLAcura CLAcura RSX