Loading...

American Motors Gremlin Turn Signal Switchs

American Motors Gremlin Turn signal switchs

Turn signal switches for your American Motors Gremlin start at low prices, with multiple options in stock from top OE-quality brands. The turn signal switch sends the command to flash your directional lights and often controls the hazard lights, lane-change function, and sometimes the headlight dimmer. A failing switch leaves you signaling with hand gestures — a safety and legal problem.

Signs your American Motors Gremlin needs a new turn signal switch

  • Turn signals flash on one side but not the other, and the bulbs check out fine
  • The lever must be held manually to signal instead of self-canceling after a turn
  • Hazard lights stop working even though the flasher relay and fuses are good
  • You hear clicking inside the column but no exterior lights flash
  • High-beam flash or headlight dimmer function stops responding at the stalk
  • Intermittent or completely dead signal that comes and goes with column movement or vibration

Which turn signal switch should you buy for your American Motors Gremlin?

The biggest decision is whether to buy an OEM-equivalent replacement or a more affordable aftermarket unit. Many American Motors Gremlin turn signal switches are part of a multifunction stalk that also controls wipers, high beams, or cruise, so confirm exactly which functions your failed switch handles before ordering.

OEM / Dealer-quality replacement
Best for
Owners who want exact fit and original feel with all factory functions intact
What you get
Precise plug-and-play fitment, matching stalk texture, full function coverage including any integrated cruise or wiper controls
Aftermarket direct-fit (branded)
Best for
Daily drivers looking for a reliable fix at a lower price than OEM
What you get
Vehicle-specific plug, comparable durability, may omit rarely-used secondary functions — verify compatibility carefully
Multifunction combination switch
Best for
Vehicles where turn signal, wiper, and headlight controls share one unit
What you get
Single assembly replaces multiple worn stalks at once; cost-effective if more than one function has failed
Remanufactured switch
Best for
Budget-conscious owners on older or high-mileage American Motors Gremlin models
What you get
Core-style unit cleaned and rebuilt to spec; lower upfront cost, quality varies by rebuilder — check warranty terms

Replacing the turn signal switch on a American Motors Gremlin

Moderate⏱ 1–2 hoursTrim panel removal tools or flathead screwdriverPhillips and Torx screwdriversSocket set with extensionsSteering wheel puller (if column shroud requires it)Multimeter (optional, for pre-install circuit check)

Disconnect the negative battery cable and wait for any airbag capacitor to discharge before touching the steering column. Remove the column shroud panels, unplug the wiring harness connector from the old switch, and transfer the stalk to the new unit before reversing the steps. Reconnect the battery, then test every function — signals, hazards, high-beam flash, and any integrated controls — before closing up the column.

Frequently asked questions

How much does it cost to replace turn signal switches on a American Motors Gremlin?
Parts alone start at low prices for the American Motors Gremlin. A shop will typically add one to two hours of labor on top of the part cost, since the steering column trim or airbag clockspring may need to be moved out of the way. DIY replacement keeps the total cost at the part price only.
Can I drive my American Motors Gremlin with a broken turn signal switch?
You can keep the vehicle moving, but you should not drive it. Non-functioning turn signals are a traffic-law violation in every state and a genuine safety hazard. If the hazard lights are also out, the risk compounds. Replace the switch promptly or use an alternate route and avoid lane changes until it is fixed.
Is the turn signal switch the same as the multifunction switch on my American Motors Gremlin?
On many American Motors Gremlin models, yes. Automakers often combine the turn signal lever with wiper speed, high-beam flash, and sometimes cruise-control resume into one multifunction stalk assembly. Check your part listing to confirm which functions are included, so you do not accidentally order a partial replacement that omits a control you still need.
Will a bad turn signal switch affect my American Motors Gremlin hazard lights?
Frequently, yes. On most American Motors Gremlin designs the hazard switch circuitry runs through or adjacent to the turn signal switch assembly. If the switch fails internally, hazards may stop working entirely or work only on one side. Replacing the switch typically restores both functions at the same time.
Do I need to remove the airbag or steering wheel to replace the turn signal switch on my American Motors Gremlin?
Often, but not always. Many American Motors Gremlin configurations require removing the steering column shroud and disconnecting the clockspring or spiral cable to access the switch. If your vehicle has an airbag, the battery must be disconnected and sufficient time allowed for the capacitor to discharge before you work near the column.
How long does a turn signal switch last on a American Motors Gremlin?
Turn signal switches are mechanical components cycled thousands of times per year and generally last many years, but contact wear, corrosion, and broken internal plastic tabs shorten their life. High-mileage use, frequent towing vibration, or moisture intrusion into the column are the most common reasons for early failure on the American Motors Gremlin.

More parts for your American Motors Gremlin

Alternator Rectifier SetDistributor Primary Lead WireShock AbsorberHazard Warning Flasher ConnectorIgnition CondenserSteering Idler Arm BushingUniversal Joint Strap KitA/C Receiver Drier

Turn signal switchs for other American Motors models

American Motors HornetAmerican Motors RebelAmerican Motors MatadorAmerican Motors PacerAmerican Motors AmbassadorAmerican Motors Rambler