Loading...
Sun visor brackets for your Audi A3 Quattro start at $18.95, with 2 options in stock from URO. The bracket is the plastic or metal mount that anchors the sun visor to the headliner or roof rail. When it breaks, the visor droops, swings loose, or falls entirely — blocking your sightline and creating a safety hazard.
Sun visor brackets are position-specific and side-specific — the driver-side and passenger-side brackets are not interchangeable, and some vehicles use a separate swing-arm extension bracket in addition to the main pivot mount. Confirm whether you need the main pivot bracket, the headliner-end clip bracket, or both before ordering.
| Option | Best for | What you get |
|---|---|---|
| OEM-equivalent replacement | Restoring factory fit and finish with no modifications | Exact dimension match, correct clip pattern, and matching plastic color or texture for your Audi A3 Quattro |
| Driver-side bracket | Replacing the mount on the left/driver position that sees the most daily use and UV stress | Side-specific pivot housing designed for the steering-column-side visor on your Audi A3 Quattro |
| Passenger-side bracket | Replacing the right-side mount, often needed after a passenger repeatedly forces the visor past its stop | Mirror-image bracket with the correct pivot angle and clip spacing for the passenger position |
| Swing-arm extension bracket | Vehicles whose visor slides or pivots to cover the side window, where a secondary bracket supports the extended position | Secondary mount point that keeps the visor stable at full extension and prevents lateral flex on your Audi A3 Quattro |
Remove the mounting screws securing the old bracket to the headliner or roof rail, then carefully pull the bracket free to avoid tearing the headliner fabric. Disconnect any wiring if the visor has a lamp or vanity mirror, then transfer the pivot rod to the new bracket and secure it with the original or supplied hardware. Test the visor through its full range of motion before re-seating any trim panels to confirm the bracket is seated and the pivot holds under light pressure.