Loading...
Starting at $21.95, AutoBuffy stocks 1 windshield washer pump grommets from URO. This small rubber seal seats the washer pump in the fluid reservoir, creating a watertight connection. When it cracks or deteriorates, washer fluid leaks around the pump base, the system loses prime, and the pump can burn out — leaving you with no spray and a puddle under the hood.
The grommet must match the pump outlet diameter and reservoir port size on your Audi Coupe exactly — even a few millimeters off will cause leaks or prevent the pump from seating. Most Audi Coupe owners choose between an OEM-spec replacement and a universal-fit option; both can work, but fitment precision is the deciding factor.
| Option | Best for | What you get |
|---|---|---|
| OEM-spec vehicle-specific grommet | Owners who want guaranteed fit with no modification | Exact dimensions, durometer, and port geometry matched to the Audi Coupe reservoir and pump |
| Universal rubber grommet (sized to match) | Budget-conscious repairs when OEM part is unavailable or discontinued | Standard neoprene or EPDM rubber ring sold by pump outlet diameter; requires confirming ID/OD measurements before purchase |
| Pump-and-grommet kit | Replacing a failed or burnt-out pump at the same time | New pump pre-fitted with a fresh grommet so both sealing surfaces mate correctly from the start |
| Heavy-duty EPDM grommet | Vehicles in extreme climates or those using concentrated washer fluid formulas | Superior resistance to temperature cycling, ozone, and chemical exposure compared to standard rubber grommets |
Drain or siphon the washer reservoir to prevent spills, then disconnect the electrical connector and hose from the pump and pull the pump straight out of the reservoir port. Pry the old grommet off the pump outlet, press the new grommet firmly into place until it seats evenly, then reinsert the pump into the reservoir with steady pressure until the grommet seals flush against the port wall. Refill the reservoir, run the washer system, and inspect the joint for any remaining seepage before closing the hood.