Loading...

Audi Rs3 PCV Valve Diaphragms

Audi Rs3 Pcv valve diaphragms

Starting at $39.95, AutoBuffy stocks 2 PCV valve diaphragms from SKP and Dorman to fit your Audi Rs3. The PCV valve diaphragm is the flexible membrane inside the positive crankcase ventilation system that regulates crankcase pressure and routes blow-by gases back into the intake. When it tears or hardens, oil leaks, rough idle, and failed emissions tests follow.

Signs your Audi Rs3 needs a new PCV valve diaphragm

  • Rough or erratic idle caused by an unmetered vacuum leak through the compromised diaphragm
  • Oil consumption increases with no visible external leak, as crankcase pressure forces oil past seals
  • Oily residue or sludge buildup inside the intake manifold or on the throttle body bore
  • A whistling or hissing noise from the valve cover or PCV hose area under light throttle
  • Check engine light with a lean mixture or evaporative system code tied to crankcase pressure imbalance
  • Failed emissions test due to unburned hydrocarbons escaping the crankcase rather than being re-combusted

Which PCV valve diaphragm should you buy for your Audi Rs3?

The main decision is material quality and whether you buy the diaphragm alone or as part of a complete PCV valve or oil separator cover kit. Some Audi Rs3 engines integrate the diaphragm inside a sealed valve cover baffle, so fitment precision matters more than brand loyalty. Match the replacement to your exact engine code, not just the model name.

OEM-equivalent rubber diaphragm
Best for
Restoring factory performance on a daily driver
What you get
Correct durometer rubber, matching port dimensions, direct swap with no modification
Upgraded silicone diaphragm
Best for
High-mileage engines or those running higher oil temperatures
What you get
Greater heat and chemical resistance, longer service life than standard rubber
Complete PCV valve assembly with diaphragm
Best for
Valves showing wear on the spring or housing alongside the diaphragm
What you get
All wear items replaced at once, single part number, eliminates leak points between components
Oil separator cover kit (diaphragm + gasket + hardware)
Best for
Engines where the diaphragm is molded into a plastic baffle or cam cover insert
What you get
Comprehensive seal renewal, prevents repeat labor on related gaskets, restores full separation efficiency

Pcv valve diaphragms brands we stock for your Audi Rs3

SKP
1 option · from $39.95
Dorman
1 option · from $47.95

Replacing a PCV valve diaphragm on a Audi Rs3

Easy⏱ 30–60 minutesSocket set and ratchetFlathead and Phillips screwdriversNeedle-nose pliers (for hose clamps)Clean lint-free ragsFlashlight or work light

Locate the PCV valve on the valve cover or intake manifold, disconnect the attached hoses, and remove the valve from its grommet or threaded port. If the diaphragm is a discrete internal component, disassemble the valve body, swap the diaphragm, and reassemble; if it is integrated into a baffle cover, unbolt the cover, transfer gaskets, and install the new unit. Reconnect all hoses securely and start the engine to confirm idle quality and the absence of vacuum leaks.

Frequently asked questions

How much does it cost to replace PCV valve diaphragms on a Audi Rs3?
Parts start at $39.95 for a Audi Rs3 PCV valve diaphragm at AutoBuffy. DIY total cost is typically just the part price plus a new PCV hose if yours is brittle. Shop labor adds one to two hours of billed time depending on how accessible the valve cover or baffle housing is on your engine.
Can a bad PCV valve diaphragm damage my Audi Rs3's engine?
Yes. A failed diaphragm allows crankcase pressure to build unchecked, forcing oil past gaskets and seals. Over time this causes oil consumption, sludge accumulation in the intake tract, and accelerated wear on piston rings and valve stem seals. Replacing the diaphragm promptly is far cheaper than addressing downstream engine damage.
How long does a PCV valve diaphragm last on a Audi Rs3?
Most rubber diaphragms last several years under normal conditions, but heat cycling, oil contamination, and extended oil change intervals accelerate hardening and cracking. Silicone variants typically outlast standard rubber. Inspecting the diaphragm whenever the valve cover gasket is off costs nothing and can prevent a future no-start or oil leak.
Is a PCV valve diaphragm the same as a PCV valve on my Audi Rs3?
Not always. Some engines use a traditional inline PCV valve with an internal diaphragm or reed that can be serviced separately. Others integrate the diaphragm into an oil separator baffle molded into the valve cover. Check which configuration your specific Audi Rs3 engine uses before ordering to ensure you get the correct serviceable component.
Can I test the PCV valve diaphragm before replacing it on my Audi Rs3?
Yes. Remove the PCV valve and shake it — a functioning valve rattles as the internal diaphragm or needle moves freely. Then block the valve inlet with your thumb and apply light suction; a good diaphragm holds vacuum momentarily. A valve that does not rattle, passes no suction, or rattles loosely with no resistance needs replacement.
Will a torn PCV valve diaphragm cause my Audi Rs3 to fail an emissions test?
Very likely. A compromised diaphragm stops routing blow-by gases back into the intake for combustion. Those hydrocarbons either vent to atmosphere or cause a rich-running condition that elevates tailpipe emissions. A lean code from the resulting vacuum leak can also trigger a check engine light, which automatically fails an OBD-II emissions inspection.

Shop pcv valve diaphragms by year for the Audi Rs3

2017

More parts for your Audi Rs3

Serpentine BeltMulti-Purpose Electrical ConnectorBrake PadEngine Crankshaft SealAmbient Air Temperature SensorWasher Fluid Level SensorStabilizer Bar LinkDoor Lock Actuator

Pcv valve diaphragms for other Audi models

Audi A4 allroadAudi A5 QuattroAudi A3Audi S3Audi Q5Audi A3 Quattro