Loading...

Bmw 135I Tailgate Latchs

Bmw 135I Tailgate latchs

Tailgate latches for your Bmw 135I start at $43.95, and we stock 1 options from SKP. The tailgate latch is the mechanical assembly that locks the tailgate closed while driving and releases it when you pull the handle. When it fails, the tailgate may swing open unexpectedly, refuse to latch, or lock you out of the bed entirely.

Signs your Bmw 135I tailgate latch needs replacing

  • Tailgate drops open on its own while driving or after hitting a bump
  • Handle pulls freely but the tailgate does not release — latch is stuck in the locked position
  • Tailgate closes but won't latch at all, leaving the gate hanging loose
  • Visible corrosion, cracked plastic housing, or a bent striker plate on the latch assembly
  • Key or remote lock function no longer engages or disengages the tailgate
  • Grinding, popping, or excessive slop felt through the handle when operating the latch

Which tailgate latch should you buy for your Bmw 135I?

Tailgate latches vary by whether they include the full assembly (latch, rods, and handle mechanism) or just the latch pawl and housing. You also need to confirm lock/unlock style — manual, key-cylinder, or power — since the wrong variant won't connect to your existing linkage. Matching the exact configuration to your Bmw 135I's trim level is the most important buying decision.

OE Replacement (Full Assembly)
Best for
Closest to factory fit with no fabrication
What you get
Complete latch, pawl, and rod bracket matching original mount points and linkage
Latch Pawl / Housing Only
Best for
Budget repair when rods and handle are undamaged
What you get
Just the latch body and spring; reuses existing handle and rod hardware
Power Latch Assembly
Best for
Trucks with power-lock tailgates or remote-release option
What you get
Motorized actuator integrated into the latch for electric release via key fob or cab switch
Heavy-Duty / Stainless Upgrade
Best for
High-mileage trucks, fleet use, or rust-prone climates
What you get
Corrosion-resistant materials and reinforced pawl for longer service life in harsh conditions

Tailgate latchs brands we stock for your Bmw 135I

SKP
1 option · from $43.95

Replacing the tailgate latch on a Bmw 135I

Easy⏱ 30–60 minutesTrim panel removal tool or flathead screwdriverPhillips and Torx screwdriver setSocket and ratchet setNeedle-nose pliers (for rod clips)

Lower the tailgate and remove the interior trim panel to access the latch and its connecting rods. Disconnect the rod clips with needle-nose pliers, unbolt the old latch, and transfer or reconnect all rods and linkage to the new assembly before bolting it in place. Test the latch several times from outside before reinstalling the trim panel to confirm smooth operation and a solid lock.

Frequently asked questions

How much does it cost to replace tailgate latches on a Bmw 135I?
Parts start at $43.95 for a basic latch assembly on a Bmw 135I. A full OE-style replacement with rods and housing costs more. DIY installation adds no labor cost; a shop typically charges one to two hours of labor on top of the part price, so total out-of-pocket at a repair facility can run significantly higher.
Can I drive my Bmw 135I with a broken tailgate latch?
You should not drive with a failed tailgate latch. A tailgate that cannot lock shut can drop open at highway speed, creating a road hazard for vehicles behind you and potentially allowing cargo to spill. Secure the tailgate with a latch strap or cable lock as a short-term fix, but replace the latch promptly.
How do I know if the latch itself is broken or if it's the rod and linkage on my Bmw 135I?
Have a helper operate the exterior handle while you watch the latch mechanism from inside the bed. If the latch pawl moves but won't release the striker, the latch body is faulty. If the pawl doesn't move at all when the handle is pulled, the rod, cable, or handle linkage has broken or disconnected upstream of the latch.
Are tailgate latches on the Bmw 135I side-specific?
Most full-size truck tailgates use a single central latch, but many designs use two side-mounted latches — one on each end of the gate. If your Bmw 135I has dual latches, they are typically mirror-image parts and must be ordered as driver-side and passenger-side separately. Check your part listing carefully before ordering to avoid a mismatched return.
How long does a tailgate latch last on a Bmw 135I?
A tailgate latch on a Bmw 135I typically lasts many years under normal use, but lifespan depends heavily on climate and how often the tailgate is used. Road salt, mud, and heavy daily cycling accelerate wear on the spring and pawl. Trucks in rust-belt regions or fleet service often need latch replacement sooner than trucks in dry climates.
Will an aftermarket tailgate latch fit my Bmw 135I as well as the factory part?
Quality aftermarket latches engineered to match OE specifications fit and function correctly on the Bmw 135I without modification. Stick with reputable brands from SKP and confirm the part number covers your exact model year and trim. Poorly made off-brand latches may have sloppy tolerances that cause premature failure or misalignment with the striker.

Shop tailgate latchs by year for the Bmw 135I

201320122011201020092008

More parts for your Bmw 135I

Radiator Drain PlugRadiator Coolant Hose ConnectorDrive Shaft CouplerHeadlight Wiring HarnessDirect Ignition Coil KitStrut Mount KitTurbocharger Vacuum ReservoirPower Steering Pump Pulley

Tailgate latchs for other Bmw models

Bmw 535iBmw 323iBmw 335xiBmw 335i xDriveBmw 325xiBmw 330xi