Loading...

Bmw 320I Accelerator Pedals

Bmw 320I Accelerator pedals

Starting at $50.95, AutoBuffy stocks 1 accelerator pedals from URO that fit the Bmw 320I. The accelerator pedal sends throttle position data to the engine control module, telling it how much power to deliver. When it fails, the engine may not respond correctly to your input — a safety issue that warrants immediate attention.

Signs your Bmw 320I needs a new accelerator pedal

  • Engine hesitates or stumbles when you press the pedal, even at consistent pressure
  • Vehicle accelerates erratically or surges without a steady change in pedal position
  • Throttle response feels delayed, sluggish, or completely absent
  • Check Engine light is on with a throttle position or pedal position sensor fault code (P2120–P2135 range)
  • Pedal feels physically loose, stiff, sticky, or fails to spring back when released
  • Cruise control or electronic stability systems behave erratically or disable themselves

Which accelerator pedal should you buy for your Bmw 320I?

Most modern Bmw 320I accelerator pedals are electronic assemblies — the pedal, position sensor, and bracket ship as one unit, so you replace the whole assembly rather than just a sensor. The key decision is whether to buy OEM-equivalent quality or a value-grade part, and whether you need a standalone pedal assembly or one with an integrated mounting bracket designed for direct bolt-on fitment.

OEM-Equivalent Assembly
Best for
Drivers who want factory fit and long-term reliability
What you get
Pedal, dual-track position sensor, and bracket matched to factory specs; typically the longest service life
Value / Economy Assembly
Best for
High-mileage vehicles or budget-conscious repairs where longevity is less critical
What you get
Functional replacement at lower cost; adequate for normal daily driving, shorter warranty
Sensor-Only Replacement
Best for
When the pedal bracket and pivot are intact but the sensor has failed and is sold separately
What you get
Replaces only the throttle position sensor portion; saves cost if the mechanical assembly is undamaged
Performance / Adjustable Pedal
Best for
Enthusiast or track use where throttle response tuning is desired
What you get
Modified sensitivity curve or adjustable throw; not always street-legal in all regions — verify before purchasing

Accelerator pedals brands we stock for your Bmw 320I

URO
1 option · from $50.95

Replacing the accelerator pedal on a Bmw 320I

Easy⏱ 30–60 minutesSocket set and ratchetFlathead and Phillips screwdriversTrim panel removal tool (if lower dash panel must be removed)Electrical connector pick or small pick tool

Access the pedal assembly by removing the lower dash or kick panel if required on the Bmw 320I, then unplug the electrical connector and unbolt the pedal bracket — typically two to four fasteners. Install the new assembly in reverse order, ensuring the connector clicks fully into place. After reassembly, perform any required throttle relearn procedure before test-driving.

Frequently asked questions

How much does it cost to replace accelerator pedals on a Bmw 320I?
Parts start at $50.95 for the Bmw 320I at AutoBuffy. A complete electronic accelerator pedal assembly typically runs from that entry price up through premium OEM-equivalent options. Add an hour or less of shop labor if you're not doing it yourself. DIY installation is straightforward and can keep total costs near the part price alone.
Can I drive my Bmw 320I with a faulty accelerator pedal?
You should not drive the Bmw 320I if the pedal is causing uncontrolled acceleration, no throttle response, or erratic engine behavior. These conditions are a direct safety risk. A sticky or slow-responding pedal that still functions may allow a short, careful trip to a shop, but the issue should be repaired before regular driving resumes.
Is the accelerator pedal position sensor sold separately or as part of the assembly?
On most modern vehicles including the Bmw 320I, the throttle pedal position sensor is integrated into the pedal assembly and the entire unit is replaced together. Some applications do offer a standalone sensor. Check the fitment notes on the specific part listing to confirm what is included before ordering.
Do I need to reprogram or calibrate the accelerator pedal after replacing it on a Bmw 320I?
Many electronic accelerator pedal assemblies require a throttle position relearn procedure after installation on the Bmw 320I. This is often a simple key-on, ignition cycle sequence outlined in the service manual — no scan tool needed in most cases. Some vehicles do require a scan tool reset. Confirm the procedure for your specific application before completing the job.
What causes an accelerator pedal to fail?
The most common causes are wear or contamination inside the dual-track position sensor, corrosion on the electrical connector, or physical damage to the pedal arm or pivot. Exposure to road debris, moisture, and repeated stress cycles over time degrade the internal sensor contacts, causing signal faults that the ECM interprets as a throttle system malfunction.
Will any accelerator pedal fit my Bmw 320I, or does it have to be vehicle-specific?
Accelerator pedal assemblies are highly vehicle-specific. The connector type, sensor signal range, bracket bolt pattern, and pedal geometry are all engineered for particular applications. Installing the wrong assembly can cause DTCs, limp mode, or no throttle response. Always use the year, make, and model filter on AutoBuffy to confirm correct fitment before purchasing.

Shop accelerator pedals by year for the Bmw 320I

1983198219811980197919781977

More parts for your Bmw 320I

Engine Coolant Level SensorBrake Pad Wear SensorEngine Variable Valve Lift Eccentric Shaft SensorBrake RotorFuel Pump Mounting GasketEngine Valve CoverClutch Fork PivotVehicle Battery

Accelerator pedals for other Bmw models

Bmw 3.0SBmw 630CSiBmw M3Bmw 325iBmw 323iBmw 530i