Loading...
Starting at $144.95, AutoBuffy stocks 2 transmission oil pan kits from Sachs and URO for the Bmw 320I Xdrive. The transmission oil pan holds the automatic transmission fluid that lubricates and cools internal components. When it cracks, warps, or its gasket fails, fluid leaks out — leading to slipping gears, overheating, and eventual transmission failure if ignored.
The main decision is material and what the kit includes. Some pans are stamped steel replacements that match the factory design, while others are cast aluminum units with deeper sumps and drain plugs that improve cooling and simplify future fluid changes. Always confirm the kit includes a new gasket or seal, and check whether a filter and fluid are bundled in.
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement Stamped Steel Kit | Restoring a stock setup at the lowest cost | Factory-depth steel pan, gasket or formed seal — direct bolt-on with no modifications |
| Cast Aluminum Deep-Sump Kit | Towing, performance driving, or high-heat applications | Increased fluid capacity, better heat dissipation, integrated drain plug, and a reusable gasket |
| Pan, Filter & Fluid Combo Kit | High-mileage vehicles or first-time pan service | New pan, gasket, transmission filter, and premeasured fluid — everything needed in one box |
| Magnetic Pan Kit | Owners who want extra drivetrain protection | Pan with built-in magnetic drain plug or magnetic inserts that capture metal debris before it circulates |
Safely raise and support the Bmw 320I Xdrive, position a drain pan, and remove the bolts progressively to allow fluid to drain in a controlled direction before dropping the pan fully. Clean both mating surfaces thoroughly — any old gasket material left behind will cause an immediate re-leak. Install the new pan and gasket using a cross-pattern tightening sequence to the range specified in the Bmw 320I Xdrive service manual, then refill with the correct fluid type and quantity before running the engine and checking for leaks.