Loading...

Bmw 325Xi Parking Light Bulb Sockets

Bmw 325Xi Parking light bulb sockets

Starting at $28.95, AutoBuffy stocks 1 parking light bulb sockets for the Bmw 325Xi from brands including URO. The socket is the wiring harness connector that holds the bulb in place and delivers power to your parking light. A cracked, melted, or corroded socket causes intermittent or total parking light failure, which is a safety issue and a ticketable equipment violation.

Signs your Bmw 325Xi needs a new parking light bulb socket

  • Parking light stays dark even after installing a known-good replacement bulb
  • Bulb flickers or cuts out when the vehicle hits bumps or vibrations
  • Visible melting, scorching, or discoloration on the plastic socket body
  • Green or white corrosion on the metal terminals inside the socket
  • Burning plastic smell near the front fascia when parking lights are on
  • Parking light fault warning on the instrument cluster or body control module scan

Which parking light bulb socket should you buy for your Bmw 325Xi?

The most important buying decision is fitment: sockets are keyed to a specific bulb base type (commonly wedge, bayonet, or indexed), and the wrong base will not lock the bulb or make proper electrical contact. Beyond fitment, consider whether you need a pigtail-style socket with a short wire lead for splicing or a direct plug-in socket that snaps into the housing without cutting wires.

OEM-equivalent direct-fit socket
Best for
Stock replacement with no wiring work
What you get
Exact connector body and terminal layout matching the factory harness plug
Pigtail socket with wire leads
Best for
Harnesses with burned or cut wires that need splicing
What you get
Pre-terminated leads you butt-splice or solder into the existing wiring
Heavy-duty / upgraded socket
Best for
High-wattage or frequently overheating applications
What you get
Higher-temp plastic and heavier-gauge terminals that resist heat damage longer
Multi-pack / repair kit
Best for
Fleet vehicles or owners doing both sides at once
What you get
Two or more sockets plus terminals, often at a lower per-unit cost

Parking light bulb sockets brands we stock for your Bmw 325Xi

URO
1 option · from $28.95

Replacing a parking light bulb socket on a Bmw 325Xi

Easy⏱ 15–45 minutesFlathead screwdriver or trim panel removal toolNeedle-nose pliersWire stripper and butt-splice connectors (pigtail style only)Electrical contact cleaner and dielectric greaseMultimeter (optional, for testing circuit before reinstall)

Access the parking light from the engine bay or through the wheel well liner depending on the vehicle, then twist the socket counterclockwise or depress the retaining tab to release it from the housing. For a direct-fit socket, unplug the harness connector, plug in the new socket, and reinstall the bulb. For a pigtail socket, cut the old socket from the harness, strip the leads, and secure the new socket with butt-splice connectors or solder before sealing with heat-shrink tubing.

Frequently asked questions

How much does it cost to replace parking light bulb sockets on a Bmw 325Xi?
Parts start at $28.95 at AutoBuffy. A direct-fit socket is typically a DIY job taking under 30 minutes, so many owners skip labor costs entirely. If a shop handles it, expect a modest labor charge on top of the part price, since access is usually straightforward on most vehicles.
Can a bad parking light bulb socket cause the bulb to burn out repeatedly on a Bmw 325Xi?
Yes. A socket with loose, corroded, or pitted terminals creates electrical resistance that generates excess heat at the base of the bulb. That heat shortens bulb life dramatically. If you find yourself replacing the same parking light bulb more than once in a short period, inspect the socket terminals before installing another bulb.
Is it safe to drive a Bmw 325Xi with a parking light socket that has melted?
A melted socket is a potential electrical fire hazard and should be addressed promptly. Melted plastic means the socket has already overheated, which can expose bare wiring to adjacent plastic components. Pull the fuse for the affected circuit as a temporary measure and replace the socket before driving at night or in low-visibility conditions.
Do I need to replace the entire headlight assembly if the parking light socket is damaged on my Bmw 325Xi?
In most cases, no. The parking light bulb socket is a serviceable component that unplugs or splices into the main harness. Only replace the full assembly if the housing itself is cracked or the socket mount tab inside the housing is broken beyond repair. Replacing just the socket is far less expensive.
How do I know which parking light bulb socket fits my Bmw 325Xi?
Match by bulb base type first — check your owner's manual or the existing bulb for a stamped number — then verify the connector body style matches your harness plug. AutoBuffy's fitment filter narrows the 1 options down to sockets confirmed for your Bmw 325Xi, eliminating guesswork before you order.
Can I repair a corroded parking light socket instead of replacing it on a Bmw 325Xi?
Minor surface corrosion on terminals can be cleaned with electrical contact cleaner and a small wire brush, then treated with dielectric grease to slow future oxidation. However, if the terminal is pitted, collapsed, or the plastic body is cracked or melted, cleaning is a temporary fix at best and full socket replacement is the correct repair.

Shop parking light bulb sockets by year for the Bmw 325Xi

20052004200320022001

More parts for your Bmw 325Xi

Engine Camshaft Position Sensor O-RingA/C Refrigerant Suction HoseAccelerator Pedal SensorTurn Signal Light AssemblyVapor Canister GrommetHVAC RelayTransmission Filter KitAutomatic Transmission Oil Cooler Thermostat

Parking light bulb sockets for other Bmw models

Bmw 330iBmw 323CiBmw 323iBmw M3Bmw 325CiBmw 328Ci