Loading...

Bmw 335I License Plate Brackets

Bmw 335I License plate brackets

License plate brackets for the Bmw 335I start at $47.95, with 1 options in stock from URO. A license plate bracket mounts your plate securely to the front or rear of the vehicle. When it corrodes, cracks, or breaks off, your plate can shift, fall, or sit illegally — risking fines and failed inspections.

Signs your Bmw 335I needs a new license plate bracket

  • License plate visibly tilts, sags, or rotates instead of sitting flat and level
  • Plate rattles or vibrates loudly at highway speeds due to a cracked or bent bracket frame
  • Bracket has visible rust, corrosion, or flaking metal that is eating through the mounting points
  • Mounting holes are stripped or broken, so screws no longer hold the plate firmly
  • Plate falls off or hangs by a single fastener after the bracket snaps or fractures
  • Bracket surround is cracked or missing, leaving the plate exposed to further damage and looking non-OEM

Which license plate bracket should you buy for your Bmw 335I?

The main decision is position (front vs. rear), material (plastic vs. stainless steel vs. aluminum), and whether you want a plain utility bracket or a finished frame that matches the vehicle's trim. OEM-style brackets restore factory fitment, while universal aftermarket frames offer more finish choices at a lower cost.

OEM-Style Replacement Bracket
Best for
Restoring exact factory appearance and fitment
What you get
Precise mounting hole alignment, matched finish, no drilling required
Stainless Steel Frame
Best for
Owners in rust-prone or coastal climates
What you get
Corrosion-resistant material, polished or brushed finish, long service life
Plastic/ABS Frame
Best for
Budget replacement or low-exposure positions
What you get
Lightweight, rust-proof, available in chrome-look or body-color finishes
Tow Hitch / Relocated Bracket
Best for
Vehicles with aftermarket bumpers, hitches, or off-road builds
What you get
Mounts plate away from the bumper face to clear accessories or winches

License plate brackets brands we stock for your Bmw 335I

URO
1 option · from $47.95

Replacing a license plate bracket on a Bmw 335I

Easy⏱ 15–30 minutesPhillips or flathead screwdriverSocket or nut driver setAnti-seize compoundNeedle-nose pliers (for broken fastener removal)

Remove the old screws and lift the damaged bracket away from the bumper, noting how any illumination wiring is routed if your Bmw 335I has a lighted plate surround. Position the new bracket over the mounting holes, apply anti-seize to the screws, and tighten until the bracket sits flush and the plate does not wobble. Snug is sufficient — overtightening cracks plastic brackets and strips bumper nuts.

Frequently asked questions

How much does it cost to replace license plate brackets on a Bmw 335I?
Parts start at $47.95 for the Bmw 335I. Basic plastic or OEM-style brackets sit at the lower end of the range, while stainless steel or branded frames cost more. Installation is simple enough that most owners do it themselves, keeping total cost close to the part price alone.
Is driving without a secured license plate bracket on a Bmw 335I illegal?
Yes. Most jurisdictions require plates to be securely fastened, clearly visible, and level. A missing or broken bracket that lets the plate swing, obscure characters, or fall off can result in a traffic stop, a fix-it ticket, or a fine. Replace a failed bracket promptly to stay street-legal.
Will any license plate bracket fit my Bmw 335I, or do I need a vehicle-specific one?
Standard license plates in the U.S. are a uniform size, so universal frames physically fit the plate itself. However, the bracket that bolts to the Bmw 335I's bumper uses specific mounting hole spacing. An OEM-style bracket for the Bmw 335I ensures those bolt holes line up without drilling or modification.
How do I keep the license plate bracket on my Bmw 335I from rusting again?
Choose a stainless steel or UV-stabilized ABS bracket rather than bare mild steel. Apply an anti-seize compound to the mounting screws during installation so they don't corrode in place. In salt-belt regions, rinse the bracket area when washing the vehicle to slow corrosion at the mounting points.
Can a broken license plate bracket on a Bmw 335I damage the bumper?
Yes. A dangling plate held by a cracked bracket can scratch or gouge the bumper finish, especially at highway speeds. Hardware that falls out of a failed bracket can also scratch surrounding trim or get ingested into a front air dam. Replacing the bracket quickly prevents secondary cosmetic damage.
Do I need to remove the bumper to replace the license plate bracket on a Bmw 335I?
In most cases, no. License plate brackets on the Bmw 335I typically fasten with two to four screws that are accessible from the front or rear without removing the bumper. Some integrated OEM brackets with wiring for illumination may require unplugging a connector, but the bumper itself usually stays in place.

Shop license plate brackets by year for the Bmw 335I

201520142013201220112010200920082007

More parts for your Bmw 335I

Control Arm Repair KitBattery Vent TubeControl ArmEngine Oil Cooler Cover SealEngine Timing SprocketInterior Panel RetainerWheel Bearing Retaining RingFuel Injector

License plate brackets for other Bmw models

Bmw 228iBmw 328CiBmw X3Bmw 435i Gran CoupeBmw 435iBmw 528xi