Loading...

Bmw 335I Vapor Canister Grommets

Bmw 335I Vapor canister grommets

Starting at $25.95, AutoBuffy stocks 1 vapor canister grommets from URO for the Bmw 335I. This small rubber seal mounts the evaporative emissions canister to its bracket, isolating it from vibration and preventing fuel vapors from escaping. A cracked or collapsed grommet breaks the sealed EVAP system, triggering check-engine lights and failed emissions tests.

Signs your Bmw 335I needs a new vapor canister grommet

  • Check-engine light is on with an EVAP-related fault code (P0440–P0457 range) stored in the ECU
  • Noticeable fuel odor near the engine bay or around the rear of the vehicle where the canister sits
  • Failed state emissions inspection due to an EVAP system leak detected during an OBD-II readiness check
  • Visible cracking, flattening, or disintegration of the rubber grommet when the canister is inspected
  • Canister rattles or shifts in its bracket because the grommet no longer holds it snugly
  • Smoke machine leak-down test shows vapor escaping at the canister mounting point rather than elsewhere in the EVAP system

Which vapor canister grommet should you buy for your Bmw 335I?

Vapor canister grommets differ mainly in material compound and fit precision. OEM-spec grommets use a fuel-resistant rubber formulated to hold its shape under heat cycling, while generic grommets can shrink or harden prematurely. Match the grommet's inner diameter and profile to your specific canister bracket to ensure a leak-free seal.

OEM-equivalent rubber grommet
Best for
Owners who want a direct factory-spec replacement with no modifications
What you get
Exact inner/outer diameter match, fuel-resistant EPDM or nitrile rubber, longest service life
Aftermarket economy grommet
Best for
Budget-conscious repairs on high-mileage vehicles where longevity is less critical
What you get
Lower upfront cost, adequate short-term seal, may require replacement sooner than OEM spec
Canister grommet kit (multi-piece)
Best for
Complete EVAP service or when adjacent grommets and o-rings also show wear
What you get
Includes all mounting grommets and sometimes vapor line seals for the canister, better value than individual pieces
Heavy-duty reinforced grommet
Best for
Vehicles in high-heat environments or with a history of premature rubber degradation
What you get
Thicker wall construction, higher heat tolerance, resists ozone and fuel vapors longer than standard compounds

Vapor canister grommets brands we stock for your Bmw 335I

URO
1 option · from $25.95

Replacing the vapor canister grommet on a Bmw 335I

Easy⏱ 30–60 minutesOBD-II scanner (to read and clear fault codes)Flathead screwdriver or trim tool (to pry out the old grommet)Socket set and ratchet (to remove canister bracket if required)Smoke machine or EVAP leak tester (to confirm repair)Nitrile gloves (fuel vapor exposure)

Locate the vapor canister — typically mounted near the engine bay firewall or under the vehicle near the fuel tank — and remove any retaining clips or bracket bolts to free it. Pry out the old grommet, seat the new one firmly until it is flush and evenly set, then reinstall the canister and reconnect any vapor lines. Clear stored fault codes with an OBD-II scanner and complete a drive cycle to confirm the EVAP monitor passes before considering the repair complete.

Frequently asked questions

How much does it cost to replace vapor canister grommets on a Bmw 335I?
The part itself starts at $25.95 for the Bmw 335I. Because the grommet is a small, accessible component on most vehicles, labor is typically minimal — often under an hour at a shop. Doing it yourself keeps total cost very close to the part price alone, making this one of the more affordable EVAP repairs.
Can a bad vapor canister grommet cause a failed emissions test on a Bmw 335I?
Yes. A deteriorated grommet allows fuel vapors to escape the sealed EVAP system, which the OBD-II monitor detects as a leak. This sets a pending or confirmed fault code and marks the EVAP readiness monitor as incomplete or failed — both of which result in a failed emissions inspection in most states.
Is it safe to drive a Bmw 335I with a damaged vapor canister grommet?
The vehicle will typically still run, but driving with a leaking EVAP system means raw fuel vapors are venting to the atmosphere rather than being captured. Beyond the check-engine light and emissions failure, a fuel odor near the vehicle is a fire-safety concern that makes prompt repair advisable rather than delaying the fix.
How long does a vapor canister grommet last on a Bmw 335I?
Rubber EVAP grommets generally last many years under normal conditions, but heat cycling, ozone exposure, and contact with fuel vapors cause the rubber to harden and crack over time. Grommets on vehicles in hot climates or with engine bay heat-soak issues tend to degrade faster than those in more moderate environments.
Do I need to replace just the grommet, or the entire vapor canister on my Bmw 335I?
If a smoke test or visual inspection confirms the leak is isolated to the grommet mounting point and the canister body is intact, replacing only the grommet is sufficient and far less expensive. Replace the full canister only if it is cracked, saturated with liquid fuel, or if its internal media is confirmed to be spent.
Will replacing the vapor canister grommet clear the check-engine light on a Bmw 335I?
Replacing the grommet removes the source of the EVAP leak, but the fault code must be cleared with an OBD-II scanner after the repair. The ECU then needs to run and pass the EVAP readiness monitor — usually one or more drive cycles — before it confirms the system is sealed and turns off the light permanently.

Shop vapor canister grommets by year for the Bmw 335I

201520142013201220112010200920082007

More parts for your Bmw 335I

Control Arm Repair KitBattery Vent TubeControl ArmEngine Oil Cooler Cover SealEngine Timing SprocketInterior Panel RetainerWheel Bearing Retaining RingFuel Injector

Vapor canister grommets for other Bmw models

Bmw 325xiBmw 325iBmw 435iBmw X6Bmw ActiveHybrid 7Bmw Alpina B7