Loading...

Bmw M240I Seat Belt Buckle Button Stops

Bmw M240I Seat belt buckle button stops

Starting at $23.95, AutoBuffy stocks 1 seat belt buckle button stops from URO for the Bmw M240I. The button stop is the small plastic or nylon clip pressed onto the seat belt webbing that prevents the belt from being pulled completely through the buckle. When it breaks or slips, the belt can retract fully into the retractor, making the system unusable and creating a serious safety hazard.

Signs your Bmw M240I needs a new seat belt buckle button stop

  • The seat belt webbing pulls completely through the buckle slot and disappears into the B-pillar trim or retractor housing
  • You have to dig into the door pillar or seat side panel to fish the belt end back out before buckling
  • The existing stop clip is visibly cracked, split, or missing entirely from the webbing
  • The stop slides freely along the webbing instead of staying locked in its molded position
  • The buckle tongue rattles or sits unusually low because nothing is holding the webbing at the correct height
  • A previous seat belt replacement or repair was done and the new webbing was installed without a stop clip

Which seat belt buckle button stop should you buy for your Bmw M240I?

The main decision is matching the stop to your webbing width — most passenger vehicles use 1-inch (25 mm) or 1.5-inch (38 mm) webbing, and a stop sized for the wrong width will either slip through the buckle or not fit at all. Material and attachment style also matter: factory-style press-on nylon stops are the most common replacement, but some applications use a two-piece screw-together design for easier installation without threading the webbing.

OEM-Match Nylon Press-On Stop (1-inch)
Best for
Vehicles with standard 1-inch front or rear seat belt webbing
What you get
Exact factory profile, snaps permanently onto webbing, correct buckle clearance for original hardware
OEM-Match Nylon Press-On Stop (1.5-inch)
Best for
Trucks, vans, and older vehicles with wider 1.5-inch seat belt webbing
What you get
Wider body to match webbing width, same press-on installation, prevents retraction in heavy-duty belt systems
Two-Piece Screw-Together Stop (Universal)
Best for
DIY repairs where threading webbing through a one-piece stop is impractical
What you get
Clamshell design installs without removing buckle or retractor, adjustable position on webbing, reusable if repositioning is needed
OEM Replacement Assembly (Webbing + Stop Pre-Installed)
Best for
Cases where webbing is frayed, faded, or damaged beyond the stop alone
What you get
Complete belt webbing segment with stop already factory-set at the correct position, eliminates measurement guesswork

Seat belt buckle button stops brands we stock for your Bmw M240I

URO
1 option · from $23.95

Replacing the seat belt buckle button stop on a Bmw M240I

Easy⏱ 15–30 minutesFlathead screwdriver or trim pry tool (to fish out retracted webbing if needed)Ruler or tape measure (to confirm webbing width and stop placement position)Needle-nose pliers (to press stubborn clips fully closed on stiff webbing)

Pull the webbing fully out of the retractor to expose the end and access the buckle tongue, then remove the old or broken stop by prying the halves apart with a flathead screwdriver. Position the new stop at the correct location on the webbing — typically flush with or just above the tongue — and press it firmly closed until it does not slide under firm hand tension. Before returning the vehicle to service, buckle and unbuckle the belt several times to confirm the stop catches cleanly against the buckle housing and the webbing does not retract past it.

Frequently asked questions

How much does it cost to replace seat belt buckle button stops on a Bmw M240I?
Parts start at $23.95 for the Bmw M240I at AutoBuffy. The stop clip itself is one of the least expensive seat belt components you can buy. If you do the work yourself, that part price is typically your entire cost. A shop may charge a small labor fee, but installation is straightforward enough that most owners handle it at home.
Can I drive my Bmw M240I without a seat belt buckle button stop?
You should not. Without the stop, the belt webbing will retract fully into the pillar or seat housing the first time it is unbuckled, leaving the occupant without a functional restraint. Retrieving the belt while driving is dangerous, and in a crash an unsecured occupant faces the full consequences of no belt protection. Replace the stop before driving.
How do I know what size seat belt buckle button stop to order for my Bmw M240I?
Measure the width of the seat belt webbing with a ruler before ordering. Most cars use 1-inch (25 mm) webbing; many trucks, vans, and older vehicles use 1.5-inch (38 mm) webbing. The stop must match the webbing width exactly — too narrow and it slips through, too wide and it will not seat properly against the buckle face.
How do I install a press-on seat belt buckle button stop on a Bmw M240I?
Feed the loose end of the webbing through the buckle tongue slot, position the stop at the factory mark or flush with the tongue, then press the two halves of the clip firmly together onto the webbing until it clicks and does not slide. No tools are needed for most press-on stops. Tug the webbing firmly after installation to confirm the stop is locked in place.
Will a missing seat belt buckle button stop cause a vehicle to fail inspection?
In many states and jurisdictions, a seat belt that cannot be buckled or that retracts fully and becomes inaccessible is grounds for a safety inspection failure. Even where it is not explicitly listed, an inspector can flag any inoperative restraint system. Replacing the stop is a low-cost fix that keeps the vehicle compliant and the occupant protected.
Is the seat belt buckle button stop the same as the seat belt retainer or comfort clip?
No. The buckle button stop is factory-installed on the webbing to prevent full retraction through the buckle housing — it is a safety component. A comfort clip is an aftermarket accessory placed higher on the webbing near the shoulder to reduce chest pressure. They look similar but serve different purposes; the stop must be present for the belt to function correctly.

Shop seat belt buckle button stops by year for the Bmw M240I

20212020201920182017

More parts for your Bmw M240I

Brake Pad & Rotor KitEngine Oil Cooler Gasket SetOxygen SensorDoor Lock ActuatorPush To Start Ignition SwitchCV AxleSubframe BushingVehicle Battery

Seat belt buckle button stops for other Bmw models

Bmw 545iBmw M235i xDrive Gran CoupeBmw 135isBmw X6Bmw 330xiBmw 328i xDrive