Question 1

How much does it cost to replace traction control switches on a Buick Century?

Accepted Answer

Parts start at $29.95 on AutoBuffy for the Buick Century. Labor is typically low because the switch is accessible from the dash or center console without major disassembly — most shops charge under an hour of labor. Doing it yourself keeps the total cost close to the part price alone.

Question 2

Can I drive my Buick Century with a faulty traction control switch?

Accepted Answer

Yes, but with caution. If the switch failure leaves traction control permanently disabled, you lose wheel-slip protection on slippery surfaces. If it leaves the system stuck on, you may experience reduced throttle response when pulling a vehicle or driving in loose terrain. Replacing the switch promptly restores normal system behavior.

Question 3

Will a bad traction control switch trigger a check engine light on my Buick Century?

Accepted Answer

Not always the check engine light, but it commonly triggers the traction control or stability control warning light. Some Buick Century configurations store a diagnostic trouble code in the ABS or stability control module related to the switch signal circuit. A scan tool reading body or chassis codes — not just powertrain — will reveal the fault.

Question 4

Is replacing the traction control switch on a Buick Century a DIY job?

Accepted Answer

Generally yes. On most Buick Century layouts the switch is mounted in the instrument panel, center console, or steering column stalk and releases with a trim panel removal tool and a connector tab. No special programming is required after swapping a like-for-like switch, making it one of the more straightforward interior electrical jobs.

Question 5

How do I know if it's the switch or the traction control module causing the problem on my Buick Century?

Accepted Answer

Start with a scan tool to pull codes from the ABS or stability control module. A code pointing to the switch input circuit — rather than a wheel speed sensor or actuator — suggests the switch itself. You can also use a multimeter to check for continuity through the switch when pressed; no continuity on a closed switch confirms failure.

Question 6

Do I need to buy the same brand as the original switch for my Buick Century?

Accepted Answer

No. Any direct-fit replacement from a reputable supplier that matches your Buick Century year span and trim level will work. AutoBuffy carries 2 options across ACDelco and Standard Ignition, all verified for connector and mounting compatibility. Confirm fitment using your vehicle's year, make, model, and trim before ordering.

Option	Best for	What you get
OEM-Equivalent Direct-Fit Switch	Owners wanting a plug-and-play replacement with no modifications	Exact connector, button feel, and dash fitment matching the original switch on your Buick Century
Integrated Switch Assembly (multi-function)	Vehicles where the traction control button is part of a larger switch pod	Full switch cluster replacement covering traction control plus related functions like stability control or hill descent
Aftermarket Economy Switch	Budget-conscious owners with a vehicle out of warranty	Lower upfront cost; fitment is generally correct but button feel and longevity may differ from OEM
Remanufactured / Tested Used OEM Switch	Owners of older Buick Century trims where new switches are discontinued	Cleaned and electrically verified original-spec switch, often the only option for legacy Buick applications

Buick Century Traction control switchs

Signs your Buick Century needs a new traction control switch

Which traction control switch should you buy for your Buick Century?

Traction control switchs brands we stock for your Buick Century

Replacing the traction control switch on a Buick Century

Frequently asked questions

Shop traction control switchs by year for the Buick Century

More parts for your Buick Century

Traction control switchs for other Buick models

Buick Century Traction Control Switchs