Loading...

Buick Lesabre Wheel Hub Bolts

Buick Lesabre Wheel hub bolts

Wheel hub bolts for your Buick Lesabre start at low prices, with multiple options from top OE-quality brands. These hardened fasteners thread the wheel to the hub flange, transferring all braking and acceleration forces through the wheel. A stretched, stripped, or broken hub bolt can cause the wheel to loosen while driving — a serious safety failure that demands immediate attention.

Signs your Buick Lesabre needs new wheel hub bolts

  • Lug nut will not torque down properly — it spins freely or feels loose even when tightened
  • Visible corrosion, cracks, or a sheared shank on one or more bolts when the wheel is removed
  • Rhythmic clicking or clunking from a wheel area that persists after checking brakes and suspension
  • Wheel wobble or vibration at highway speed that was not present before a recent tire rotation or brake job
  • Lug nut cross-threads during installation, indicating the bolt's threads are damaged or the bolt is bent
  • A wheel stud that spins inside the hub flange rather than staying fixed, preventing any torque from being applied

Which wheel hub bolts should you buy for your Buick Lesabre?

The most important factors are thread pitch, shank diameter, and overall length — all must match the original specification for your Buick Lesabre exactly. Beyond fitment, material grade and knurl pattern determine how securely the bolt presses into the hub flange and how well it holds up under repeated heating and cooling cycles.

OE-Spec Replacement
Best for
Daily drivers needing a like-for-like fix
What you get
Correct thread pitch, shank length, and knurl pattern to match factory fitment; press-in installation without hub replacement
Grade 10.9 / High-Strength Aftermarket
Best for
Vehicles that see heavy loads, towing, or spirited driving
What you get
Higher tensile strength than standard OE grade; same dimensions with added resistance to stretching under load
Extended-Length Studs
Best for
Wheels with thick aftermarket spacers or deep-dish rims
What you get
Extra thread engagement for spacer applications; requires verifying clearance to avoid contact with brake components
Stainless or Zinc-Coated Studs
Best for
Vehicles in high-salt or coastal climates
What you get
Superior corrosion resistance compared to plain carbon steel; reduces future seized-lug-nut problems during routine tire service

Replacing wheel hub bolts on a Buick Lesabre

Moderate⏱ 30–90 minutes per wheelFloor jack and jack standsBreaker bar or impact wrenchHammer or dead-blow malletTorque wrenchAssorted washers and spare lug nut (for draw-through method)

Remove the wheel, rotor, and — if needed — the caliper bracket to gain clear access to the hub flange. Drive the damaged stud out from the rear with a hammer, seat the new stud through the flange hole, then use the washer-and-lug-nut method or a press to pull it fully home until the knurled shank is completely seated. Reinstall all components and torque the lug nuts to the manufacturer's specification in a star pattern, then re-torque after the first 50–100 miles.

Frequently asked questions

How much does it cost to replace wheel hub bolts on a Buick Lesabre?
Parts start at low prices for a single bolt or a full set, depending on the option you choose. A shop typically charges one to two hours of labor to press out and replace studs, which often puts the total repair in the range of a standard brake job. Doing it yourself reduces cost to parts only.
Can I drive my Buick Lesabre with a broken or missing wheel hub bolt?
No. A missing or broken wheel hub bolt puts the entire load on the remaining fasteners, which can cause them to stretch or fail in sequence. The wheel can loosen and separate from the vehicle at speed. Replace any damaged stud before driving the Buick Lesabre again, even for short distances.
Do I need a press to replace wheel hub bolts on a Buick Lesabre?
Usually, no. Most hub bolts can be knocked out with a hammer and driven back in by threading a lug nut onto the new stud and using a stack of washers as a spacer, then tightening the nut to pull the stud through the flange. A press is faster but rarely required for a single-stud roadside or driveway repair.
How many wheel hub bolts does a Buick Lesabre typically have?
Most passenger vehicles and light trucks use four or five bolts per wheel, giving a total of sixteen or twenty bolts across all four corners. Some heavy-duty trucks and older vehicles use six or eight per wheel. Check your Buick Lesabre's wheel bolt pattern to confirm the exact count before ordering replacement parts.
What causes wheel hub bolts to break on a Buick Lesabre?
The most common causes are over-torquing with an impact gun, cross-threading a lug nut onto a dirty or damaged stud, and corrosion that weakens the shank over time. Impact-gun abuse stretches the stud beyond its yield point, and a single over-torque event can leave a bolt on the verge of failure even if it looks intact.
Should I replace all wheel hub bolts at once or just the broken one?
Replace at minimum all bolts on the affected wheel. If corrosion or impact damage caused the failure, inspect the studs on all four corners and replace any that show rust pitting, thread damage, or reduced diameter at the shank. Replacing a full set is low-cost insurance against a repeat failure shortly after the first repair.

More parts for your Buick Lesabre

Complete StrutDiesel Glow Plug RelayDoor Lock Actuator KitIgnition Contact Set and Condenser KitTransmission Oil PanAlternator BearingSteering Column Housing Repair KitFuel Tank Sending Unit

Wheel hub bolts for other Buick models

Buick Park AvenueBuick AllureBuick TerrazaBuick CenturyBuick RivieraBuick LaCrosse