Loading...

Buick Skylark Steering Gear Boxs

Buick Skylark Steering gear boxs

Starting at $226.95, AutoBuffy stocks 3 steering gear boxes from Detroit Axle for your Buick Skylark. The steering gear box converts your steering wheel input into lateral movement at the front wheels. When it wears out, expect play in the wheel, wandering, or fluid leaks — all of which compromise control and safety.

Signs your Buick Skylark needs a new steering gear box

  • Excessive play or looseness in the steering wheel before the wheels respond
  • Vehicle wanders or drifts to one side without steering input on a straight road
  • Visible power steering fluid leaking from the gear box housing or sector shaft seal
  • Steering feels stiff, notchy, or requires unusual effort — especially at low speeds or while parking
  • Clunking or knocking sensation felt through the steering wheel when turning or hitting bumps
  • Steering wheel returns slowly or not at all to center after completing a turn

Which steering gear box should you buy for your Buick Skylark?

The most important decision is choosing between a remanufactured unit and a new unit, and confirming the correct ratio for your Buick Skylark's configuration. Some Skylark trims also differ by whether they had a standard or heavy-duty steering setup, so matching those specs prevents handling problems after installation.

Remanufactured (Standard)
Best for
Budget-conscious owners with a stock Buick Skylark
What you get
Core rebuild to OE specs, pressure-tested, typically the lowest upfront cost with a core charge
New Aftermarket
Best for
Owners wanting new-part peace of mind without dealer pricing
What you get
All-new internals and seals, no core charge required, wider availability across brands
OEM / OE-Quality Replacement
Best for
Owners who want exact factory fitment and ratio match
What you get
Matches original gear ratio and mounting exactly, best option when factory handling feel must be preserved
High-Ratio / Performance Unit
Best for
Lifted trucks or off-road Buick Skylark builds needing quicker steering response
What you get
Reduced steering ratio for faster wheel response, often reinforced internals for higher load capacity

Steering gear boxs brands we stock for your Buick Skylark

Detroit Axle
3 options · from $226.95

Replacing a steering gear box on a Buick Skylark

Advanced⏱ 2–4 hoursFloor jack and jack standsPitman arm pullerSocket and wrench set (metric and standard)Torque wrenchPower steering line wrenches (flare nut wrenches)

Replacing the steering gear box on the Buick Skylark involves disconnecting the power steering pressure and return lines, unbolting the pitman arm with a dedicated puller, and unbolting the box from the frame — then reversing the process with the new unit. After installation, refill and bleed the power steering system to purge air before testing. A professional wheel alignment should be performed immediately after the job is complete.

Frequently asked questions

How much does it cost to replace steering gear boxes on a Buick Skylark?
Parts start at $226.95 on AutoBuffy for the Buick Skylark. Total replacement cost depends on whether you choose remanufactured or new, and whether a core charge applies. Professional labor typically adds several hours of shop time on top of the part cost, so DIY installation can produce meaningful savings.
Can I drive my Buick Skylark with a failing steering gear box?
Driving with a worn or leaking steering gear box is not recommended. A box that is low on fluid or has significant internal wear can fail progressively, leading to sudden loss of power-assist or unpredictable steering response. If you notice play, leaking fluid, or wandering, have it inspected and replaced before extended driving.
Does replacing the steering gear box on a Buick Skylark require a wheel alignment afterward?
Yes, a four-wheel alignment is strongly recommended after installing a steering gear box on the Buick Skylark. Disconnecting and reconnecting the steering linkage, pitman arm, and drag link can alter toe and steering center. Skipping alignment risks uneven tire wear and a steering wheel that sits off-center.
What is the difference between a steering gear box and a rack and pinion?
A steering gear box — also called a recirculating ball or worm gear box — is typically found on trucks, SUVs, and older vehicles with a solid front axle or body-on-frame construction. Rack and pinion is common on passenger cars. The Buick Skylark uses a gear box design, meaning rack and pinion parts are not interchangeable.
How long does a steering gear box last on a Buick Skylark?
Steering gear boxes generally last many years under normal driving conditions, but longevity is shortened by off-road use, neglected power steering fluid, fluid leaks left unaddressed, or frequent towing and hauling. Regularly checking fluid level and condition is the most effective way to extend the life of the unit on a Buick Skylark.
Do I need to replace the pitman arm when replacing the steering gear box on a Buick Skylark?
Not always, but it is worth inspecting the pitman arm while the gear box is out. If the arm shows wear, corrosion, or damage at the spline interface, replacing both together saves labor time and ensures the new box is connected to a sound component. Many technicians recommend doing both as a set on higher-mileage Buick Skylark applications.

Shop steering gear boxs by year for the Buick Skylark

1981198019791978197719761975197219711970196919681967196619651964

More parts for your Buick Skylark

Engine Oil Pressure SwitchEngine Coolant Level SensorCruise Control Release SwitchLeaf Spring Shackle BushingA/C System Repair KitAutomatic Transmission Oil Cooler End FittingFuel Tank Pressure SensorHVAC Blower Motor Wheel

Steering gear boxs for other Buick models

Buick GS 350Buick RegalBuick CenturyBuick SpecialBuick GS 400Buick LeSabre