Loading...
Starting at $12.95, AutoBuffy stocks 2 engine coolant thermostat seals from GM Genuine Parts and Elring. This seal sits between the thermostat and its housing, forming a pressure-tight barrier that keeps coolant on the correct circuit. When it fails, coolant leaks externally or bypasses the thermostat entirely, causing overheating, heater failure, and potential engine damage.
The main decision is material and form: seals come as molded rubber O-rings, flat gaskets, or integrated seal-and-thermostat kits, and the correct choice is dictated by how your Cadillac Allante's housing is designed. Using the wrong profile or material can result in a seal that crushes unevenly, leaks under pressure, or degrades prematurely from contact with modern extended-life coolant chemistry.
| Option | Best for | What you get |
|---|---|---|
| OE-spec rubber O-ring | Direct replacement on housings designed for a round-groove seal | Exact profile match, confirmed compatibility with OAT and HOAT coolants, least risk of improper seating |
| Flat molded gasket | Housings with a flat mating flange rather than a groove | Full-surface coverage, easier to align during install, often supplied pre-coated for improved sealing |
| Thermostat-and-seal kit | High-mileage vehicles or when the thermostat is being replaced at the same time | Both components matched by the same manufacturer, single part number, eliminates a second trip for a forgotten seal |
| Silicone high-temp seal | Performance builds or engines that run consistently elevated coolant temperatures | Greater heat and pressure tolerance than standard EPDM rubber, longer service life in demanding conditions |
Drain enough coolant to drop the level below the thermostat housing, then remove the housing bolts and lift the housing to expose the thermostat and seal. Clean both mating surfaces thoroughly — any old gasket material or debris will cause the new seal to leak — then seat the new seal in its groove or on the flange before reassembling. Refill with the correct coolant type for your Cadillac Allante, run the engine to operating temperature, and check for leaks around the housing before considering the job complete.