Loading...

Cadillac Fleetwood Hood Latch Assemblys

Cadillac Fleetwood Hood latch assemblys

Hood latch assemblies for the Cadillac Fleetwood start at $68.95, with 2 options in stock from SKP and Dorman. The hood latch secures the hood to the body, keeping it closed at highway speeds and releasing it when you pull the interior cable. A failed latch can leave the hood unlatched, creating a dangerous fly-up risk or leaving you unable to open the hood for routine maintenance.

Signs your Cadillac Fleetwood needs a new hood latch assembly

  • Hood pops open on its own or fails to stay fully latched after closing
  • Hood warning light or chime stays on even after the hood is shut
  • The hood requires extra force or multiple slams to click into place
  • You can hear or feel the hood flutter or vibrate at highway speeds
  • The secondary safety catch no longer engages, leaving only one latch point
  • Corrosion, a bent striker, or a broken latch pawl is visible when inspecting under the hood

Which hood latch assembly should you buy for your Cadillac Fleetwood?

The main decision is between an OE-equivalent replacement and an upgraded aftermarket unit. Fit and finish matter here because a latch that doesn't align precisely with your Cadillac Fleetwood's striker will either rattle or refuse to latch. Check whether your application uses a single-release or dual-release (primary + secondary catch) design before ordering.

OEM / OE-Equivalent
Best for
Owners who want an exact factory fit and finish
What you get
Direct bolt-on replacement matching original geometry, striker alignment, and release force
Premium Aftermarket
Best for
Drivers in high-corrosion climates (salt, humidity)
What you get
Upgraded coatings or stainless hardware for longer service life over the OE unit
Complete Assembly Kit
Best for
DIYers replacing a damaged cable and latch at the same time
What you get
Latch body, safety catch, and release cable bundled to eliminate mismatched components
Economy / Value
Best for
Budget-minded owners of high-mileage vehicles
What you get
Lower upfront cost; functional replacement that meets basic safety requirements but may use thinner materials

Hood latch assemblys brands we stock for your Cadillac Fleetwood

SKP
1 option · from $68.95
Dorman
1 option · from $102.95

Replacing a hood latch assembly on a Cadillac Fleetwood

Easy⏱ 30–60 minutesSocket set and ratchetFlathead and Phillips screwdriversNeedle-nose pliers (for cable clip removal)Marker or masking tape (for marking original latch position)Penetrating oil (if bolts are corroded)

Before removing the old latch, mark its position on the hood with tape or a marker so the replacement goes back in the same alignment. Disconnect the cable end from the latch lever using needle-nose pliers, remove the mounting bolts, and transfer any grounding straps or sensors to the new unit before bolting it in. After installation, close and open the hood several times to confirm positive engagement, then adjust the latch position slightly if the hood sits uneven or requires extra force to close.

Frequently asked questions

How much does it cost to replace hood latch assemblies on a Cadillac Fleetwood?
Parts start at $68.95 for the Cadillac Fleetwood. A shop will typically add one to two hours of labor on top of the part cost, though many owners complete this repair themselves in under an hour. Choosing an OE-equivalent or complete kit can eliminate a second trip if the release cable is also worn.
Can I drive my Cadillac Fleetwood with a broken hood latch?
You should not. A hood that is not fully latched can fly up at highway speeds, instantly blocking the driver's view and causing a serious accident. If the primary latch has failed but the secondary safety catch still holds, drive only at low speed and only as far as needed to make the repair.
How long does a hood latch assembly last on a Cadillac Fleetwood?
Most hood latches are designed to last the life of the vehicle, but corrosion, accident damage, or a misaligned striker can shorten that span significantly. Vehicles driven in road-salt regions or frequently power-washed in the engine bay tend to see latch failures sooner than average.
How do I open the hood on my Cadillac Fleetwood if the latch or cable is broken?
With a broken interior cable, you can often open the hood by having a helper pull the grille or feel through the grille opening for the latch lever while you pull the interior release. A thin, flexible tool inserted along the grille can also trip the secondary catch. Avoid forcing the hood, which can bend the striker plate.
Is a hood latch assembly on a Cadillac Fleetwood hard to replace yourself?
For most owners the swap is straightforward — typically a handful of bolts and a cable clip. The trickier part is adjusting the latch position so the hood sits flush and latches without excessive force. Loosening the mounting bolts, aligning the latch to the striker, and re-torquing takes patience but no specialty tools.
Do I need to replace the hood release cable at the same time as the latch?
Not always, but it is worth inspecting. If the cable is frayed, kinked, or corroded near the latch end, replacing both at the same time saves a second disassembly job later. Many complete hood latch kits include the cable precisely for this reason, and the combined labor cost is nearly identical to replacing each piece separately.

Shop hood latch assemblys by year for the Cadillac Fleetwood

199619951994199319921991199019891988198719861985198419831982

More parts for your Cadillac Fleetwood

Flex Fuel Sensor ConnectorCruise Control Release SwitchComplete StrutLiftgate Lock CylinderDistributor BrushA/C System Valve Core and Cap KitBare StrutAlignment Shim

Hood latch assemblys for other Cadillac models

Cadillac SevilleCadillac XT4Cadillac DeVilleCadillac XT5Cadillac EldoradoCadillac XT6