Loading...

Chrysler Concorde Glove Box Light Switchs

Chrysler Concorde Glove box light switchs

Starting at low prices, AutoBuffy stocks multiple glove box light switches from top OE-quality brands for the Chrysler Concorde. This small switch mounts inside the glove box door hinge area and cuts power to the interior light when the door closes. When it fails, the light stays on continuously, draining the battery — or never comes on at all.

Signs your Chrysler Concorde needs a new glove box light switch

  • Glove box light stays on even after the door is fully closed, causing a slow battery drain
  • Glove box light never illuminates at all when the door is opened
  • Light flickers or cuts in and out as you open and close the glove box door
  • Unexpected battery drain with no obvious cause — glove box switch is a common overlooked culprit
  • Switch plunger feels stuck, broken, or depressed permanently and does not spring back
  • Visible corrosion, cracked housing, or a melted plastic body on the switch itself

Which glove box light switch should you buy for your Chrysler Concorde?

The main decision is whether to buy an OEM-equivalent replacement or a universal-style switch. Fit, plunger travel length, and connector type must match your Chrysler Concorde's original switch exactly, or the light will not cycle correctly. Check your existing switch's mounting style — press-in clip, screw mount, or integrated hinge tab — before ordering.

OEM-Equivalent (Direct Fit)
Best for
Owners who want a plug-and-play swap with no modification
What you get
Exact connector, plunger length, and mounting clip matched to the Chrysler Concorde; installs in minutes
OEM Dealer Part
Best for
Owners under warranty or who require factory spec documentation
What you get
Guaranteed factory fitment, higher cost, often longer lead time from the dealer
Universal Plunger Switch
Best for
DIY repairs on a tight budget or when the direct-fit part is discontinued
What you get
Requires splicing wires and may need bracket modification; low cost but more installation effort
Aftermarket Multi-Vehicle Fit
Best for
Shops repairing multiple makes and wanting to stock one SKU
What you get
Broader compatibility range, moderate cost, may need minor connector adapter; confirm fitment for Chrysler Concorde before purchasing

Replacing the glove box light switch on a Chrysler Concorde

Easy⏱ 15–30 minutesFlathead screwdriver or trim pry toolPhillips head screwdriverMultimeter (for testing)Needle-nose pliers

Open the glove box fully, locate the switch mounted in the hinge area or inner wall, and use a trim tool or screwdriver to release the retaining clip or unscrew the mounting fastener. Disconnect the wiring connector, press in the new switch until it clicks or snug-tighten the mounting screw, and reconnect the connector. Close the door to verify the light cycles off correctly before reassembling any panels.

Frequently asked questions

How much does it cost to replace glove box light switches on a Chrysler Concorde?
Parts start at low prices for the Chrysler Concorde. The switch itself is inexpensive, and because labor is minimal — typically under 30 minutes — total out-of-pocket cost is low whether you DIY or have a shop do it. A shop may charge a small electrical diagnostic fee if the root cause wasn't obvious.
Can a bad glove box light switch really drain my Chrysler Concorde's battery?
Yes. If the switch fails in the open-circuit position, the glove box bulb stays on continuously, even with the door closed. A standard incandescent bulb left on overnight is enough to drain a battery significantly. Replacing the faulty switch is the fastest fix; you can also temporarily remove the bulb while you wait for the part.
How do I test the glove box light switch on my Chrysler Concorde before replacing it?
Open the glove box, locate the switch, and press the plunger by hand while watching the light. If the light does not turn off when the plunger is fully depressed, the switch has failed. You can also test continuity across the switch terminals with a multimeter — a good switch should show continuity when released and open circuit when pressed.
Is the glove box light switch on a Chrysler Concorde the same as the door jamb switch?
Not always. Door jamb switches on the Chrysler Concorde control dome and courtesy lights and are typically a different part number, connector, and plunger size. Some vehicles share a common switch design across both locations, but you should verify by part number before ordering to avoid getting the wrong plunger travel length or terminal configuration.
How long does a glove box light switch last on a Chrysler Concorde?
Most glove box light switches last many years under normal use, but the part is small and plastic, making it vulnerable to brittleness with age, heat cycles, and repeated mechanical contact. Switches on vehicles in hot climates or high-use fleet applications tend to fail sooner. It is considered a wear item and is not typically included in extended warranties.
What brands of glove box light switches does AutoBuffy carry for the Chrysler Concorde?
AutoBuffy currently stocks multiple glove box light switches for the Chrysler Concorde from top OE-quality brands. These cover the full all model years production range. Use the vehicle selector at checkout to confirm the correct fitment for your specific Chrysler Concorde before adding to your cart.

More parts for your Chrysler Concorde

HVAC Harness ConnectorRadiator CapFuel Injection Pressure RegulatorAccessory Drive BeltAutomatic Transmission Oil Cooler TubeHVAC Control Relay ConnectorBrake Hydraulic HoseRack & Pinion Mount Bushing

Glove box light switchs for other Chrysler models

Chrysler DynastyChrysler VoyagerChrysler 300Chrysler Town CountryChrysler 300MChrysler Prowler