Loading...

Chrysler Dynasty HVAC Automatic Temperature Control (ATC) Relays

Chrysler Dynasty Hvac automatic temperature control (atc) relays

Starting at low prices, AutoBuffy stocks multiple HVAC Automatic Temperature Control (ATC) relays from top OE-quality brands. The ATC relay is an electrical switch that routes power to your climate control system's actuators, blower, and compressor on demand. When it fails, automatic temperature regulation stops working, leaving your Chrysler Dynasty stuck with no climate control response regardless of the settings you choose.

Signs your Chrysler Dynasty needs a new HVAC Automatic Temperature Control relay

  • The automatic climate control system is completely unresponsive — fan, compressor, and temperature settings do nothing when selected.
  • The HVAC system works intermittently, cutting in and out without any input, then stopping for no clear reason.
  • The blower motor runs constantly at one speed and cannot be adjusted or shut off through the ATC panel.
  • The A/C compressor fails to engage even when the system is set to a cool temperature and the refrigerant level is confirmed correct.
  • You notice a clicking or chattering sound from the relay location in the fuse/relay box when the climate control is activated.
  • Fault codes related to the climate control module or blower circuit are stored when the system is scanned with an OBD or HVAC-specific diagnostic tool.

Which HVAC ATC relay should you buy for your Chrysler Dynasty?

The ATC relay is a precision electrical component, and fitment to your exact Chrysler Dynasty year and trim matters more than it does for many mechanical parts. Your main decisions are OEM-equivalent versus aftermarket, and whether you want a direct-plug-in replacement or an upgraded relay with enhanced contact durability. Confirm the relay's pin count, terminal layout, and coil voltage rating match the original before ordering.

OEM-Equivalent (Aftermarket)
Best for
Owners who want factory-spec performance at a lower price than dealer parts
What you get
Same pin configuration, coil resistance, and contact rating as the original; plug-and-play installation with no programming needed
OEM / Dealer-Sourced Relay
Best for
Vehicles still under warranty or owners who want guaranteed factory fitment
What you get
Exact manufacturer part number, verified compatibility, and full manufacturer backing — typically the highest cost option
Heavy-Duty / Upgraded Contact Relay
Best for
High-mileage vehicles or climates with extreme heat cycles that stress relay contacts
What you get
Reinforced contact surfaces rated for higher cycle counts; reduces the chance of premature failure in demanding conditions
Relay + Fuse/Relay Box Kit
Best for
Vehicles where relay socket corrosion or burned terminals are also present
What you get
Replacement relay paired with a pigtail connector or socket repair kit, restoring a clean electrical connection rather than just swapping the relay

Replacing the HVAC Automatic Temperature Control relay on a Chrysler Dynasty

Easy⏱ 15–30 minutesRelay puller or needle-nose pliersFlathead screwdriver (for fuse box cover)OBD or HVAC scan tool (to clear fault codes if present)Electrical contact cleaner and dielectric grease

Locate the ATC relay using your owner's manual or the fuse box diagram, disconnect the battery if directed by your service documentation, and pull the relay straight out of its socket using a relay puller or pliers — avoid prying against adjacent components. Inspect the relay socket for burned or corroded terminals and clean them with electrical contact cleaner before pressing the new relay firmly into place. Reconnect the battery, test all climate control functions, and clear any stored HVAC fault codes with a scan tool.

Frequently asked questions

How much does it cost to replace HVAC Automatic Temperature Control relays on a Chrysler Dynasty?
The part itself starts at low prices at AutoBuffy. A relay is a DIY-friendly repair for most owners — the part cost is low and installation typically takes under 30 minutes if the relay is accessible in the underhood or interior fuse box. Shop labor, if needed, is usually billed at less than one hour.
Can I drive my Chrysler Dynasty with a failed ATC relay?
Yes, a failed ATC relay does not affect engine operation or safety in most cases. However, you will have no functional climate control — no heat, A/C, or defrost through the automatic system. In cold climates, loss of defrost can become a visibility and safety issue, so replacing the relay promptly is advisable.
How do I know if the ATC relay is the problem and not the climate control module itself?
Start by swapping the ATC relay with an identical relay from another circuit in the same fuse box, such as a horn or accessory relay with matching specs. If climate control function returns, the relay was faulty. If nothing changes, the problem likely lies with the ATC module, wiring, or another component in the control circuit.
Where is the HVAC ATC relay located on a Chrysler Dynasty?
On most vehicles, the ATC relay sits in the underhood fuse and relay box or a secondary interior relay panel, often near the firewall or beneath the dashboard. Check your owner's manual or the diagram printed on the fuse box cover to identify the exact relay position before removal.
Does replacing the ATC relay require reprogramming or resetting the climate control system?
In the vast majority of cases, no programming is needed. The ATC relay is a passive electrical switch with no stored calibration data. After installing the new relay, the climate control system should resume normal automatic operation immediately. Some vehicles may require a brief battery reset if fault codes were set, but this is not common.
How long do HVAC ATC relays typically last?
ATC relays are rated for many thousands of switching cycles and can last the life of the vehicle under normal conditions. They tend to fail prematurely due to heat exposure, moisture intrusion, corroded relay sockets, or electrical surges. Vehicles in very hot climates or with prior electrical issues may see shorter relay service life.

More parts for your Chrysler Dynasty

Engine Oil Pressure SwitchGlove Box Light SwitchExhaust Gas Recirculation (EGR) ValveStarterCoil Spring SeatEngine Timing Belt TensionerRadio CapacitorA/C Compressor Kit

Hvac automatic temperature control (atc) relays for other Chrysler models

Chrysler ImperialChrysler SebringChrysler 300Chrysler CirrusChrysler DaytonaChrysler New Yorker