Loading...
Starting at low prices, AutoBuffy stocks multiple neutral safety switches for the Dodge A108 Van from trusted brands including top OE-quality brands. The neutral safety switch prevents the engine from cranking in any gear except Park or Neutral, and on most vehicles it also controls backup lamp activation. A failed switch can leave your Dodge A108 Van unable to start or, more dangerously, able to crank in gear.
Neutral safety switches vary primarily by mounting location — column-mounted versus transmission-mounted — and by whether they are a standalone switch or a combined transmission range sensor that also feeds gear-position data to the PCM. Verify which configuration your Dodge A108 Van uses before ordering, because the two types are not interchangeable. OE-equivalent units that match the original connector and calibration are generally the safest choice for a daily driver.
| Option | Best for | What you get |
|---|---|---|
| OE-Equivalent Replacement | Daily drivers, reliability-first owners | Direct plug-and-play fit; matches original circuit resistance and connector; no recalibration needed in most cases |
| Combined Transmission Range Sensor (TRS) | Vehicles where the neutral safety function is integrated into the range sensor | Single unit replaces both the safety switch and gear-position signal; requires careful installation alignment on transmission-mounted designs |
| Column-Mounted Switch | Vehicles with steering-column shifters | Clips onto the shift linkage at the column; simpler R&R than transmission-mounted units; typically does not require draining fluid |
| Premium / OEM-Spec | High-mileage vehicles or those with recurring electrical faults | Tighter manufacturing tolerances, heavier-duty contacts, longer rated cycle life; worth the price premium when the connector shows heat or corrosion damage |
For a column-mounted switch, disconnect the battery, unplug the harness, remove the retaining screws or clip, and install the new switch at the same shifter-linkage position before reconnecting. For a transmission-mounted unit, raise and support the vehicle safely, unplug the connector, remove the retaining bolt or unthread the switch, and install the replacement — aligning any indexing tabs to the transmission shaft as directed by the manufacturer. Always verify the engine cranks only in Park and Neutral and that backup lights function correctly before returning the Dodge A108 Van to service.