Loading...

Dodge B100 Van Exhaust System Hangers

Dodge B100 Van Exhaust system hangers

Starting at $5.95, AutoBuffy stocks 1 exhaust system hangers from Walker. A hanger is the rubber-and-metal bracket that suspends your exhaust pipe and muffler beneath the vehicle, isolating vibration and keeping components aligned. When hangers crack or tear, exhaust sections sag, rattle, and can contact the undercarriage or road surface.

Signs your Dodge B100 Van needs a new exhaust system hanger

  • Loud rattling or clunking from underneath, especially over bumps or during acceleration
  • Visible sagging or misaligned exhaust pipe hanging lower than normal on one side
  • Rubber isolator is cracked, torn, or completely separated from the metal hook
  • Exhaust pipe contacting the heat shield, floorpan, or rear fascia and producing a metallic scraping noise
  • Exhaust drone or tone change at certain RPM ranges caused by the pipe vibrating against the body
  • Smell of exhaust fumes inside the cabin due to a displaced pipe routing exhaust toward the passenger compartment

Which exhaust system hanger should you buy for your Dodge B100 Van?

The main decisions are material grade and mounting position. Stock rubber hangers wear out from heat cycling and road exposure, but upgraded materials extend service life significantly. You also need to match the hanger to the correct location on the exhaust — front pipe, mid-pipe, muffler, or tailpipe — since loop diameter and hook spacing vary by position.

OEM-spec rubber hanger
Best for
Exact factory replacement, standard daily driving
What you get
Correct fit, stock vibration isolation, straightforward swap with no modifications
Heavy-duty reinforced rubber hanger
Best for
High-mileage vehicles or those driven on rough roads
What you get
Thicker rubber with embedded steel core resists tearing longer than standard units
Polyurethane hanger
Best for
Performance builds or vehicles needing reduced exhaust movement
What you get
Firmer than rubber, transmits more vibration to the cabin but holds exhaust position more rigidly
Universal hanger with adjustable strap
Best for
Custom exhausts or hard-to-match replacement situations
What you get
Adjustable loop diameter fits a range of pipe sizes; requires trimming or bending to fit cleanly

Exhaust system hangers brands we stock for your Dodge B100 Van

Walker
1 option · from $5.95

Replacing exhaust system hangers on a Dodge B100 Van

Easy⏱ 30–60 minutesFloor jack and jack stands or rampsPenetrating oil (for corroded studs or pins)Flathead screwdriver or hanger removal toolPliersWork gloves

Safely raise and support the vehicle, then spray any corroded hanger studs or pins with penetrating oil and allow it to soak. Use a flathead screwdriver or dedicated hanger removal tool to pry the rubber loop off the mounting pin, then slide the new hanger into place — polyurethane hangers may need a light coat of dish soap to slip on. Lower the vehicle and confirm the exhaust hangs level with no contact points before driving.

Frequently asked questions

How much does it cost to replace exhaust system hangers on a Dodge B100 Van?
Parts start at $5.95 at AutoBuffy. A single hanger is one of the least expensive exhaust components you can buy. If you install it yourself, that's your total cost. A shop typically charges one to two hours of labor, so the complete repair cost depends almost entirely on your local labor rate.
Can I drive my Dodge B100 Van with a broken exhaust hanger?
You can drive short distances, but it is not advisable. A sagging exhaust pipe can contact the road over dips, snag on debris, or wear through adjacent components. More seriously, a displaced pipe can route exhaust gases toward the cabin, creating a carbon monoxide risk. Replace a failed hanger as soon as possible.
How long do exhaust hangers last on a Dodge B100 Van?
Rubber exhaust hangers typically last several years under normal conditions, but lifespan varies widely. Heat cycling, road salt exposure, and frequent short trips that prevent full warm-up accelerate rubber deterioration. Vehicles in cold climates or those driven on salted winter roads often see hangers fail sooner than those in mild, dry regions.
How do I know which exhaust hanger fits my Dodge B100 Van?
Match the hanger by the hook outer diameter, loop inner diameter, and the center-to-center distance between the two mounting points. Position matters too — a rear muffler hanger is often a different part number than a mid-pipe hanger on the same vehicle. Using your Dodge B100 Van's year and engine size when searching ensures the correct fitment.
Is replacing an exhaust hanger a DIY job on a Dodge B100 Van?
Yes, for most hangers this is a straightforward DIY repair. The hardest part is usually freeing a corroded old hanger from its studs or pins. With the vehicle safely raised, basic hand tools, and penetrating oil for stubborn fasteners, most exhaust hangers can be swapped in under an hour without special skills.
Do I need to replace all exhaust hangers at once on my Dodge B100 Van?
Not necessarily, but it makes sense to inspect all of them while you have the vehicle raised. Hangers are installed at the same time and experience the same heat and corrosion exposure, so if one has failed, others are likely close behind. Replacing a full set at once saves labor time compared to returning for individual hangers.

Shop exhaust system hangers by year for the Dodge B100 Van

1974197319721971

More parts for your Dodge B100 Van

Neutral Safety Switch ConnectorSteering Center LinkAutomatic Transmission Oil CoolerDistributorHVAC Automatic Temperature Control (ATC) Relay ConnectorComplete StrutSpark Plug Wire SetShock Absorber Set

Exhaust system hangers for other Dodge models

Dodge W150Dodge ChargerDodge B100Dodge D200 PickupDodge B300 VanDodge D150