Loading...

Dodge B150 Fuel Tank Selector Valves

Dodge B150 Fuel tank selector valves

Starting at low prices, AutoBuffy stocks multiple fuel tank selector valves from top OE-quality brands. This valve routes fuel from one tank to another on dual-tank vehicles, letting the driver switch between tanks. When it fails, the engine may starve for fuel even with a full tank, leaving you stranded or causing stalling mid-drive.

Signs your Dodge B150 needs a new fuel tank selector valve

  • Engine stalls or dies shortly after switching from one tank to the other
  • One fuel tank reads full but the engine runs as if it's empty
  • Fuel gauge for the selected tank drops abnormally fast or reads erratically
  • You smell raw fuel near the valve or under the cab, indicating an internal leak
  • Engine hesitates or surges at steady throttle when operating on a specific tank
  • Selector valve knob or switch feels stuck, spins freely, or gives no audible click when changed

Which fuel tank selector valve should you buy for your Dodge B150?

The right selector valve depends on whether your Dodge B150 uses a vacuum-operated, electric-solenoid, or manual rotary design — these are not interchangeable. You also need to decide between an OEM-equivalent direct-fit unit and a universal valve that may require adapting your existing lines. Matching the valve type and port configuration to your original setup is the most important step before purchasing.

OEM-Equivalent Direct Fit
Best for
Drivers who want a plug-and-play replacement with no modifications
What you get
Exact port spacing, correct actuation type, and factory-spec sealing — drops in with original hardware
Electric Solenoid Valve (Replacement)
Best for
Vehicles with dash-mounted electric tank switches and vacuum or pressure lines
What you get
Solenoid-controlled diaphragm that switches tanks via the factory switch; typically more reliable than aging vacuum units
Vacuum-Operated Valve (Replacement)
Best for
Older or original-spec dual-tank trucks that rely on engine vacuum to actuate the valve
What you get
Diaphragm-style valve actuated by manifold vacuum; restores factory function without electrical upgrades
Manual Rotary Valve (Universal)
Best for
Budget builds, custom dual-tank setups, or situations where the original valve type is discontinued
What you get
Simple ball-style or rotary shutoff with no electronics or vacuum lines; requires manual access but nearly eliminates electrical failure points

Replacing the fuel tank selector valve on a Dodge B150

Moderate⏱ 1–2 hoursFlathead and Phillips screwdriversHose clamp pliers or a nut driverFuel line disconnect tool setDrain pan and shop ragsMultimeter (for diagnosing or testing electric solenoid valves)

Begin by relieving fuel system pressure and disconnecting the battery if the valve is electrically actuated. Label and remove the fuel lines and vacuum or electrical connections from the old valve, then install the new unit in the same orientation, ensuring all line connections are fully seated and clamps are snug. Before closing up, start the engine and switch between tanks while checking for leaks at every fitting.

Frequently asked questions

How much does it cost to replace fuel tank selector valves on a Dodge B150?
Parts start at low prices at AutoBuffy. A shop replacement typically adds one to two hours of labor on top of the part cost. Total out-of-pocket varies by valve type and how accessible the valve is on your Dodge B150, but this is generally one of the more affordable fuel system repairs.
Can I drive my Dodge B150 with a bad fuel tank selector valve?
Only if you can operate reliably on a single tank and the valve is not leaking fuel. A leaking or stuck selector valve is a fire hazard and should be addressed immediately. If the valve is simply stuck in one position but sealed, short-term driving on that tank is possible but not recommended long term.
How do I know if my Dodge B150 has a vacuum-operated or electric selector valve?
Check the dash switch: a rocker or toggle switch wired to a relay usually indicates an electric solenoid valve. A pull knob connected to a vacuum line under the dash points to a vacuum-operated unit. You can also trace the lines from the valve itself — rubber vacuum hose versus an electrical connector confirms the type.
How long do fuel tank selector valves typically last on a Dodge B150?
Most selector valves last many years under normal use, but internal diaphragms and O-rings degrade over time, especially in climates with temperature extremes. Vacuum-operated units tend to fail sooner than solenoid types because the rubber diaphragm is subject to constant pressure cycling. Inspect the valve if you notice any fuel switching problems after several years of service.
Will a bad selector valve damage my fuel pump on a Dodge B150?
Yes, indirectly. If the valve sticks closed or restricts flow, the active tank's pump runs under low-fuel conditions more often, generating excess heat and shortening pump life. Repeated dry-running cycles are one of the leading causes of premature fuel pump failure on dual-tank vehicles, so a faulty valve should be replaced promptly.
Is replacing a fuel tank selector valve on a Dodge B150 a DIY job?
For most owners with basic mechanical experience, yes. The valve is typically located along the frame rail or firewall and is accessible without lifting the vehicle in most cases. The main precautions are relieving fuel system pressure beforehand, having rags ready for residual fuel, and ensuring clamps and fittings are fully seated before starting the engine.

More parts for your Dodge B150

ABS RelayComplete Strut SetDistributor Vacuum AdvanceHVAC Heater HoseEngine Timing Chain KitA/C System Repair KitHVAC Blower Control SwitchBrake Rotor Set

Fuel tank selector valves for other Dodge models

Dodge B200 VanDodge W250Dodge D100 PickupDodge W200Dodge B300Dodge Ramcharger