Loading...

Dodge D400 Control Arm Bumpers

Dodge D400 Control arm bumpers

Control arm bumpers for the Dodge D400 start at low prices. We stock multiple options from top OE-quality brands. A control arm bumper is a small rubber or polyurethane jounce stop that limits how far the control arm travels and cushions metal-to-metal contact at full compression. When it deteriorates, you get harsh clunking impacts, accelerated suspension wear, and a rougher ride.

Signs your Dodge D400 needs new control arm bumpers

  • A sharp clunk or thud felt through the floorboard when hitting a pothole or dip at low to moderate speed
  • Bottoming-out sensation during hard cornering, heavy braking, or carrying a full load
  • Visible crumbling, cracking, or complete absence of the rubber or polyurethane stop when inspecting the control arm
  • Excessive vibration or harshness transmitted into the cabin over rough pavement that was not present before
  • Uneven or accelerated tire wear caused by the suspension geometry shifting beyond its designed range of motion
  • Rattling or knocking noise from the wheel well that changes intensity with road surface quality but not with steering input

Which control arm bumper should you buy for your Dodge D400?

The main decision is material: OE-style rubber restores factory ride quality and noise isolation, while polyurethane lasts longer but can transmit slightly more NVH. You should also confirm whether you need the front upper, front lower, or rear position bumper, as they differ in shape, durometer, and load rating for the Dodge D400.

OE Rubber Replacement
Best for
Daily drivers wanting factory ride and quiet cabin
What you get
Matched durometer and geometry to original spec; softest NVH isolation; shorter service life than poly
Polyurethane Upgrade
Best for
Enthusiasts, tow vehicles, or high-mileage daily drivers wanting longevity
What you get
Two to three times longer lifespan than rubber; slightly firmer feel; resists oil, heat, and ozone better
OEM / Dealer-Supply Part
Best for
Owners who want exact fit and finish without any guesswork
What you get
Direct factory replacement; guaranteed compatibility; typically higher price per piece
Complete Control Arm Kit with Bumper Included
Best for
High-mileage Dodge D400 with worn bushings or ball joints in addition to bumpers
What you get
Replaces all wear items at once; saves labor by addressing the full arm assembly in one job

Replacing control arm bumpers on a Dodge D400

Easy⏱ 30–90 minutesFloor jack and jack standsSocket set and ratchetFlathead screwdriver or trim removal toolNeedle-nose pliersRubber mallet

Raise and safely support the Dodge D400, then remove the wheel for clear access to the control arm. The old bumper typically pries or pulls off its mounting post or pocket on the arm; the new one snaps or slides into place in the same location — no torque-critical fasteners are usually involved. Reinstall the wheel, lower the vehicle, and inspect the bumper visually to confirm it is seated fully before driving.

Frequently asked questions

How much does it cost to replace control arm bumpers on a Dodge D400?
Parts start at low prices for the Dodge D400. A single bumper is one of the least expensive suspension components you can buy. DIY replacement is straightforward, so most owners only pay for parts. Shop labor, if needed, is typically billed at under one hour per side, making this a low-cost repair overall.
What does a control arm bumper actually do on a Dodge D400?
It acts as a progressive jounce stop — a cushion that prevents the steel control arm from slamming into the frame or subframe at full suspension compression. Without it, hard impacts cause metal-to-metal contact, transmitting harsh shock loads through the chassis and accelerating wear on nearby suspension and steering components.
How long do control arm bumpers last on a Dodge D400?
Rubber bumpers generally last anywhere from 50,000 to 100,000 miles depending on road conditions, climate, and load habits. Polyurethane versions typically outlast rubber by a wide margin. Frequent off-road use, heavy towing, or exposure to road salts and ozone will shorten service life considerably on any Dodge D400.
Can I drive my Dodge D400 with a broken or missing control arm bumper?
You can drive short distances, but it is not advisable. Without the bumper, the control arm bottoms out on metal at full jounce, creating harsh impacts that can crack the control arm, damage the ball joint, knock wheel alignment out of spec, and cause premature tire wear. Repair it promptly to avoid a more expensive fix.
Is replacing a control arm bumper a DIY job on a Dodge D400?
Yes, for most owners with basic mechanical experience. The bumper typically slides, snaps, or bolts onto the control arm and requires no special alignment afterward, unlike bushings or ball joints. The job usually takes under an hour per side with common hand tools, making it one of the more approachable suspension repairs on the Dodge D400.
Do I need to replace control arm bumpers in pairs on a Dodge D400?
It is strongly recommended. Bumpers on both sides experience the same age and mileage. Replacing only the failed side leaves an aged bumper on the opposite side that will likely fail soon after. Replacing both at the same time keeps suspension response balanced side-to-side and saves you from repeating the same labor a short time later.

More parts for your Dodge D400

A/C CompressorA/C Clutch Cycle SwitchHVAC Heater Control ValveControl Arm Bushing KitEngine Coolant Water OutletBrake Pad SetShock Absorber SetAutomatic Transmission Oil Cooler

Control arm bumpers for other Dodge models

Dodge B100Dodge B300 VanDodge PolaraDodge B150Dodge B2500Dodge W200 Pickup