Loading...

Dodge Lancer Coil Spring Sets

Dodge Lancer Coil spring sets

Coil spring sets for the Dodge Lancer start at $70.95, with 4 options in stock from Mevotech Supreme. Coil springs bear the full weight of the vehicle and absorb road impacts to keep tires in contact with the pavement. When they sag or crack, ride height drops, handling degrades, and uneven tire wear accelerates — problems that compound quickly if ignored.

Signs your Dodge Lancer needs new coil springs

  • One corner of the vehicle sits noticeably lower than the others, even on flat ground
  • A harsh, clunking, or metallic popping sound over bumps that changes with load
  • Excessive body roll when cornering or a feeling that the suspension has bottomed out
  • Uneven or cupped tire wear, particularly on the inner or outer edge of one axle
  • Steering feels vague or the vehicle pulls to one side without a wheel-alignment cause
  • Visible gap differences between the tire and wheel well from side to side, or a broken coil visible through the wheel

Which coil spring set should you buy for your Dodge Lancer?

The main decision is whether you want to restore the original ride height and behavior or change it. OE-replacement springs prioritize stock feel and easy fitment, while lowering and lifted options trade comfort for stance or ground clearance. Always replace springs in axle pairs so both sides compress and rebound equally.

OE-Replacement (stock rate & height)
Best for
Restoring factory ride and handling on a daily driver
What you get
Matched spring rate and free length to original specs; direct bolt-on fit; balanced ride comfort and handling
Sport / Performance (higher spring rate)
Best for
Drivers who want reduced body roll and sharper response without lowering
What you get
Stiffer rate than stock, minimal or no drop in ride height, improved cornering stability, firmer ride feel
Lowering Springs (reduced free length)
Best for
Enthusiasts wanting a lower stance and improved center of gravity
What you get
Typically 1–2 in. drop, higher spring rate for reduced squat and dive, noticeably firmer ride, may require alignment after install
Heavy-Duty / Load-Assist (progressive or overload rate)
Best for
Trucks, SUVs, or vehicles that regularly carry heavy loads or tow
What you get
Progressive winding that stays comfortable unloaded but stiffens under weight; resists sag and maintains level ride height when loaded

Coil spring sets brands we stock for your Dodge Lancer

Mevotech Supreme
4 options · from $70.95

Replacing coil springs on a Dodge Lancer

Advanced⏱ 2–4 hours per axleHydraulic floor jack and jack standsSpring compressor (rented or purchased — do not substitute)Socket and wrench set including long extensionsPry barTorque wrench

Raise and safely support the vehicle, then remove the wheel and disconnect the lower control arm or strut as needed to release spring tension. Use a quality spring compressor to compress the coil spring before removing it from the perch — never release spring tension without the compressor fully engaged. Seat the new spring squarely on both perches, reassemble in reverse order, and have the vehicle aligned before driving.

Frequently asked questions

How much does it cost to replace coil springs on a Dodge Lancer?
Parts alone start at $70.95 for a set at AutoBuffy. Add shop labor — typically one to three hours per axle — and total installed cost varies widely by location and whether strut assembly work is included. Replacing both springs on an axle at the same time keeps labor costs lower than doing them separately.
Can I replace just one coil spring on my Dodge Lancer, or do I need a pair?
Always replace coil springs in axle pairs. A single new spring has a different rate and free length than a worn partner, which creates an uneven ride height and imbalanced handling. Replacing both sides ensures equal load distribution, consistent suspension geometry, and predictable cornering behavior across the entire axle.
How long do coil springs last on a Dodge Lancer?
Coil springs typically last many years under normal driving conditions, but lifespan varies with road quality, load habits, and climate. Road salt accelerates corrosion; repeated overloading causes premature sag; and rough roads increase fatigue cracking. Inspect springs whenever shocks or struts are replaced, as worn springs often go unnoticed until failure.
Do I need an alignment after replacing coil springs on my Dodge Lancer?
Yes, a four-wheel alignment is strongly recommended after any coil spring replacement. New springs restore or alter ride height, which shifts camber, caster, and toe angles from their previous settings. Skipping alignment leads to uneven tire wear and imprecise steering, and it may void tire warranties. Budget the alignment into the total job cost.
Are coil springs and strut assemblies the same thing on a Dodge Lancer?
No. On strut-equipped suspensions, the coil spring wraps around the strut body but is a separate component. You can replace just the spring if the strut itself is serviceable, or buy a complete strut-and-spring assembly for convenience. On vehicles with coil-over-shock setups, the spring and shock are independent and each can be replaced individually.
Is replacing coil springs on a Dodge Lancer something I can do at home?
It is possible for a skilled DIYer, but it requires a proper spring compressor — a tool that can be lethal if misused. Compressed coil springs store enormous energy. If you do not have experience with a spring compressor and a safe workspace, professional installation is the right choice. The labor cost is modest compared to the safety risk.

Shop coil spring sets by year for the Dodge Lancer

19891988198719861985

More parts for your Dodge Lancer

Strut Mount KitA/C Compressor ClutchAlternator BearingBrake DrumBrake CaliperEngine MountMulti-Purpose Electrical ConnectorRadiator Cap

Coil spring sets for other Dodge models

Dodge D100Dodge D100 PickupDodge Ram 2500Dodge B350Dodge B200 VanDodge Shadow