Loading...

Dodge Raider Clutch Pilot Bearings

Dodge Raider Clutch pilot bearings

Clutch pilot bearings for your Dodge Raider start at $8.95, and AutoBuffy stocks 3 options from Dorman and SKF. The pilot bearing sits in the center of the crankshaft or flywheel and supports the transmission input shaft tip during clutch disengagement. When it fails, input shaft wobble causes grinding noise, rough shifts, and accelerated clutch disc wear.

Signs your Dodge Raider needs a new clutch pilot bearing

  • Grinding or squealing noise when the clutch pedal is fully depressed and the transmission is in neutral
  • Difficulty engaging gears smoothly, particularly first and reverse, when the vehicle is stationary
  • Vibration or shudder felt through the shifter or clutch pedal during disengagement
  • Transmission input shaft visible wobble or runout if inspected with the clutch removed
  • Premature clutch disc wear patterns on inspection, caused by input shaft misalignment
  • Noise disappears when the clutch pedal is released, pointing specifically to the pilot bearing rather than the release bearing

Which clutch pilot bearing should you buy for your Dodge Raider?

The main decisions are bearing type (roller vs. sintered bronze bushing), fit precision, and whether you want to replace the pilot bearing alone or as part of a complete clutch kit. Some Dodge Raider applications use a simple bronze bushing that requires no rolling elements, while others use a caged needle roller bearing — matching the correct type to your application is critical for proper input shaft support.

OE-Replacement Needle Roller Bearing
Best for
Daily drivers wanting factory-spec performance and long service life
What you get
Precision caged needle rollers, correct interference fit, minimal friction under load
Sintered Bronze Bushing
Best for
Dodge Raider applications originally equipped with a bushing-style pilot; budget rebuilds
What you get
Self-lubricating porous bronze, simple installation, adequate for street use and low RPM
High-Performance Roller Bearing
Best for
Performance builds, towing, or high-RPM applications with upgraded clutch kits
What you get
Heavy-duty roller cage, tighter tolerances, handles elevated heat and radial loads better than stock
Complete Clutch Kit with Pilot Bearing Included
Best for
Any full clutch replacement where the disc and pressure plate are also worn
What you get
Matched disc, pressure plate, release bearing, and pilot bearing sold together for assured compatibility

Clutch pilot bearings brands we stock for your Dodge Raider

Dorman
2 options · from $8.95
SKF
1 option · from $22.95

Replacing a clutch pilot bearing on a Dodge Raider

Advanced⏱ 3–6 hours (transmission removal included)Transmission jackPilot bearing puller or slide hammerPilot bearing installation tool or appropriately sized socketStandard socket and wrench setFlywheel holding tool

Replacing the pilot bearing on a Dodge Raider requires dropping the transmission and removing the clutch assembly to expose the crankshaft bore or flywheel recess where the bearing sits. The old bearing is extracted with a puller or hydraulic pressure method, and the new bearing is driven in flush using an installation tool that contacts only the outer race. Because the transmission is already out, this job is almost always performed alongside a complete clutch replacement.

Frequently asked questions

How much does it cost to replace clutch pilot bearings on a Dodge Raider?
The pilot bearing part itself starts at $8.95 on AutoBuffy. Total replacement cost depends heavily on labor, since the transmission must be removed to access the bearing. Most shops bundle pilot bearing replacement into a full clutch job, so the bearing cost is a small fraction of overall repair expense.
Can I replace just the pilot bearing without replacing the whole clutch on my Dodge Raider?
Technically yes, but it is rarely practical. Accessing the pilot bearing requires removing the transmission and clutch assembly. Since the labor is identical to a full clutch replacement, most mechanics and DIYers replace the entire clutch kit at the same time to avoid repeating the job within a short interval.
How do I remove a stuck pilot bearing from a Dodge Raider without a puller?
Pack the pilot bearing bore tightly with grease, then insert a wooden dowel or old input shaft of the same diameter and strike it sharply with a hammer. Hydraulic pressure forces the bearing out. A slide-hammer pilot bearing puller is the cleaner professional method and prevents damage to the crankshaft bore.
Does my Dodge Raider use a roller pilot bearing or a bronze bushing?
It depends on the engine and transmission pairing for your specific Dodge Raider. Generally, higher-torque and higher-RPM applications use needle roller bearings, while older or lower-output drivetrains often use a sintered bronze bushing. Check your Dodge Raider parts listing on AutoBuffy or your service manual to confirm which type is correct.
How long does a clutch pilot bearing last on a Dodge Raider?
A pilot bearing typically lasts as long as the clutch itself — often many tens of thousands of miles under normal driving. It is always replaced during a clutch job regardless of apparent condition, because the labor cost to revisit the job later far outweighs the low cost of a new bearing at the time of service.
What happens if you drive a Dodge Raider with a bad pilot bearing?
Continued driving with a failed pilot bearing allows the transmission input shaft to wobble during disengagement, which accelerates wear on the clutch disc, pressure plate, and transmission front bearing. What starts as an inexpensive bearing replacement can escalate into clutch component damage and, in severe cases, transmission input shaft damage.

Shop clutch pilot bearings by year for the Dodge Raider

198919881987

More parts for your Dodge Raider

Idle Speed Control Motor ConnectorComputer Control RelayAccessory Drive Belt PulleyAir Charge Temperature Sensor ConnectorHVAC Blower Control Switch ConnectorA/C System O-Ring and Gasket KitAutomatic Transmission Oil Cooler HoseCV Axle

Clutch pilot bearings for other Dodge models

Dodge D200 PickupDodge DakotaDodge CB300Dodge W250Dodge ConquestDodge W200 Series