Loading...

Dodge Sprinter 3500 Brake Fluid Pressure Sensors

Dodge Sprinter 3500 Brake fluid pressure sensors

Brake fluid pressure sensors for your Dodge Sprinter 3500 start at $283.95, with 1 options in stock from Standard Ignition. This sensor monitors hydraulic pressure in the brake circuit and sends real-time data to the ABS and stability control modules. A failed sensor triggers warning lights, disables safety systems, and can cause unpredictable braking behavior — a direct safety risk.

Signs your Dodge Sprinter 3500 needs a new brake fluid pressure sensor

  • ABS warning light illuminates on the dashboard and stays on during normal driving
  • Traction control or electronic stability control (ESC) warning light activates without a skid event
  • Brake warning light comes on even though fluid level and pad wear are normal
  • ABS activates unnecessarily at low speeds or during routine, gentle stops
  • Brake pedal feel changes — unusually soft, hard, or inconsistent — with no mechanical explanation
  • Diagnostic scan reveals pressure sensor fault codes such as C0060, C0161, or manufacturer-specific ABS pressure codes

Which brake fluid pressure sensor should you buy for your Dodge Sprinter 3500?

The main decision is whether to choose an OE-equivalent sensor matched to your Dodge Sprinter 3500's ABS module or a direct-fit aftermarket unit. Fit and calibration tolerance matter more here than with many sensors — an out-of-spec pressure reading can confuse the ABS controller even if no fault code appears. Verify connector type, thread pitch, and pressure range before purchasing.

OEM Replacement (OE-spec)
Best for
Owners who want exact factory calibration and plug-and-play installation
What you get
Matched pressure range, identical connector, no reprogramming needed
Direct-Fit Aftermarket
Best for
Budget-conscious owners doing a straightforward swap
What you get
Lower cost, vehicle-specific fit, may have slightly wider tolerance than OE
ABS Module-Integrated Sensor
Best for
Vehicles where the sensor is built into the ABS hydraulic control unit
What you get
Sold as part of a sensor-HCU assembly; resolves both sensor and internal HCU seal failures
Performance / High-Pressure Sensor
Best for
Modified vehicles or those with upgraded brake systems requiring a higher pressure range
What you get
Extended pressure range, often stainless-tipped, suitable for higher-output brake circuits

Brake fluid pressure sensors brands we stock for your Dodge Sprinter 3500

Standard Ignition
1 option · from $283.95

Replacing the brake fluid pressure sensor on a Dodge Sprinter 3500

Moderate⏱ 30–90 minutesScan tool / OBD-II code readerFlare-nut or crowfoot wrench setElectrical contact cleaner and dielectric greaseBrake fluid catch container and shop ragsBrake bleeder kit (manual or vacuum)

Depressurize the brake system and disconnect the battery before removing the old sensor from the Dodge Sprinter 3500 to avoid false signals during the swap. Thread the new sensor in carefully to avoid cross-threading, then reconnect the harness and top off brake fluid before bleeding the line at that corner to purge any air introduced during the repair. Clear fault codes with a scan tool and test-drive the Dodge Sprinter 3500 to confirm ABS and warning lights have cleared.

Frequently asked questions

How much does it cost to replace brake fluid pressure sensors on a Dodge Sprinter 3500?
Parts alone start at $283.95 for a Dodge Sprinter 3500 brake fluid pressure sensor. Total cost depends on whether the sensor is an independent unit or integrated into the ABS modulator. A standalone sensor is typically a straightforward swap, while an HCU-mounted sensor may require professional bleeding equipment, raising labor costs significantly.
Can I drive my Dodge Sprinter 3500 with a faulty brake fluid pressure sensor?
You can physically drive with a failed sensor, but it is not advisable. A failed brake fluid pressure sensor on a Dodge Sprinter 3500 typically disables ABS and may deactivate traction control and stability control. Your base braking still works, but you lose all electronic safety intervention — a serious risk in emergency stopping or slippery conditions.
Will replacing the brake fluid pressure sensor on my Dodge Sprinter 3500 clear the ABS light?
Yes, in most cases. Once a new, correctly calibrated sensor is installed on your Dodge Sprinter 3500 and the brake system is properly bled, the fault code should clear and the ABS warning light should turn off. If the light persists after replacement, scan for additional fault codes — the ABS module or wheel speed sensors may also be involved.
Does the brake fluid pressure sensor need to be programmed after installation on a Dodge Sprinter 3500?
Most direct-fit brake fluid pressure sensors for the Dodge Sprinter 3500 are plug-and-play and require no programming. However, some vehicles with advanced brake-by-wire or integrated chassis control systems may require a calibration step with a scan tool after installation. Check your Dodge Sprinter 3500's service documentation or consult the sensor's fitment notes before purchasing.
How do I know if the brake fluid pressure sensor or the ABS module is causing the fault on my Dodge Sprinter 3500?
Pull the specific fault code with a scan tool first. A code pointing to pressure sensor signal range, circuit open, or circuit short strongly suggests the sensor itself on your Dodge Sprinter 3500. If the code references internal module failure, or if a known-good sensor still produces the same fault, the ABS control module is the more likely culprit.
Does brake fluid condition affect the pressure sensor on a Dodge Sprinter 3500?
Yes. Brake fluid that is heavily contaminated or moisture-saturated is corrosive and can damage the sensing diaphragm inside the sensor over time on your Dodge Sprinter 3500. Replacing degraded brake fluid at the manufacturer-recommended interval is one of the most effective ways to extend the life of pressure sensors and other hydraulic brake components.

Shop brake fluid pressure sensors by year for the Dodge Sprinter 3500

2006200520042003

More parts for your Dodge Sprinter 3500

Door Check StrapBrake Pad Wear SensorEngine Variable Valve Timing (VVT) SprocketEngine Variable Valve Timing (VVT) Oil Control ValveDiesel Particulate Filter (DPF) Pressure SensorHVAC Blower Motor SwitchFuel Pump Module AssemblyAccessory Drive Belt Tensioner Assembly

Brake fluid pressure sensors for other Dodge models

Dodge Sprinter 2500Dodge Grand CaravanDodge ChargerDodge Magnum