Loading...

Dodge W200 Pickup Alignment Caster / Camber Kits

Dodge W200 Pickup Alignment caster / camber kits

Starting at $107.95, AutoBuffy stocks 1 alignment caster/camber kits from Mevotech Supreme to fit the Dodge W200 Pickup. These kits add adjustability to suspension points that are fixed from the factory, letting a technician correct caster and camber angles after a lift, lowering springs, collision damage, or worn components have pushed wheel geometry out of spec — preventing uneven tire wear and pulling.

Signs your Dodge W200 Pickup needs a new alignment caster / camber kit

  • Tires wearing heavily on one edge (inner or outer) despite recent rotation — a direct sign camber is out of range
  • Vehicle pulls consistently to one side on a flat, straight road even after a standard alignment attempt
  • Steering wheel sits off-center while driving straight, indicating unequal caster or camber side-to-side
  • Alignment technician reports camber or caster is outside adjustable range and cannot be corrected without additional hardware
  • Feathering or scalloping across the tread face, pointing to a combination of camber error and toe drift
  • Increased steering effort or vague on-center feel, especially after a lift or suspension component replacement

Which alignment caster / camber kit should you buy for your Dodge W200 Pickup?

The right kit depends on how much correction you need and which end of the Dodge W200 Pickup is out of spec. Kits range from simple bolt-on cam bolts or eccentric washers for minor corrections to fully adjustable upper control arms for lifted or heavily modified suspensions. Match the kit to your actual alignment printout numbers and your vehicle's ride height.

Eccentric / Cam Bolts
Best for
Minor camber correction on stock or mildly lowered Dodge W200 Pickup
What you get
Drop-in bolt replacement with offset head; quickest install, typically ±1–1.5° of correction
Camber Plates (upper strut mounts)
Best for
Lowered Dodge W200 Pickup with strut-based front suspension needing camber and sometimes caster correction
What you get
Slotted or multi-position top mount that shifts the strut centerline; wider adjustment range than cam bolts
Adjustable Upper Control Arms
Best for
Lifted Dodge W200 Pickup or solid-axle applications where caster correction is the primary need
What you get
Full replacement arm with rod-end or ball joints; provides large caster and camber range, restores factory handling geometry after a lift
Alignment Correction Kits (shims / wedge plates)
Best for
Rear camber correction on multi-link or beam-axle Dodge W200 Pickup where bolt slots are not present
What you get
Precision shims or wedge plates inserted at the knuckle or subframe; low-profile fix for rear suspension geometry

Alignment caster / camber kits brands we stock for your Dodge W200 Pickup

Mevotech Supreme
1 option · from $107.95

Replacing the alignment caster / camber kit on a Dodge W200 Pickup

Moderate⏱ 1–3 hoursFloor jack and jack standsSocket and ratchet set (metric and SAE)Torque wrenchPry bar or control arm press (for pressed-in bushings)Alignment machine or appointment at an alignment shop

Raise and support the Dodge W200 Pickup safely, then remove the wheel to access the strut, knuckle, or control arm mounting points where the kit installs. Replace the factory bolts with cam bolts or eccentric hardware, or swap the entire upper control arm if using a full adjustable arm, snugging all fasteners with the suspension at ride height before final torque. A professional wheel alignment must follow immediately to dial in caster and camber angles within the manufacturer's specifications.

Frequently asked questions

How much does it cost to replace alignment caster / camber kits on a Dodge W200 Pickup?
Parts start at $107.95 on AutoBuffy for the Dodge W200 Pickup. Add a wheel alignment service after installation, typically $80–$150 at an independent shop. Total cost varies with kit complexity — cam bolts are at the low end, while adjustable upper control arms and professional labor can push the total higher.
Can I drive my Dodge W200 Pickup with a camber or caster alignment problem?
You can drive short distances, but it is not advisable. Incorrect camber or caster causes accelerated and uneven tire wear, degraded straight-line stability, and increased stress on wheel bearings and tie rods. A significant misalignment can wear out a new set of tires in a fraction of their expected lifespan.
Do I need a caster/camber kit every time I get an alignment on my Dodge W200 Pickup?
No. A standard alignment adjusts toe and, where factory slots allow, camber and caster. A caster/camber kit is only needed when the alignment tech reports that correction is beyond the factory adjustment range — most commonly after a lift, lowering springs, collision repair, or significant suspension wear on the Dodge W200 Pickup.
Will a caster / camber kit affect the ride quality of my Dodge W200 Pickup?
A properly installed kit that restores geometry to spec will improve ride quality and reduce steering wander. Running camber or caster deliberately outside of spec — as some performance or stance builds do — can firm up steering response but may increase road noise and tire wear. Always align to spec unless building for a specific purpose.
How long do alignment caster / camber kits last on a Dodge W200 Pickup?
Cam bolts and shim-style kits are passive hardware with no wear rate — they last as long as the surrounding suspension components unless disturbed. Adjustable control arms with rod-end joints should be inspected periodically for looseness or corrosion, particularly on Dodge W200 Pickup models driven in harsh climates or on rough roads.
Do I need an alignment after installing a caster / camber kit on my Dodge W200 Pickup?
Yes, always. Installing the kit changes the geometry of the suspension, so a full four-wheel alignment is required immediately after installation to set all angles within spec. Skipping the alignment after fitting the kit defeats the purpose of the repair and can leave the Dodge W200 Pickup with worse handling than before.

Shop alignment caster / camber kits by year for the Dodge W200 Pickup

197419731972197119701969

More parts for your Dodge W200 Pickup

Steering King Pin Repair KitComplete StrutHeadlight Dimmer SwitchDistributor CapEngine Oil FilterAccessory Drive Belt Idler PulleyDistributor Ignition PickupIgnition Control Module Connector

Alignment caster / camber kits for other Dodge models

Dodge D200 PickupDodge W200 SeriesDodge MonacoDodge B200 VanDodge 330Dodge Ram 1500