Loading...
Starting at low prices, AutoBuffy stocks multiple ignition switches from top OE-quality brands to fit your Fargo P200 Parcel Delivery. The ignition switch is the electrical component behind the key cylinder that sends power to the starter, fuel system, and accessories. When it fails, your Fargo P200 Parcel Delivery may not start, lose power mid-drive, or strand you without warning.
Ignition switches are sold as the electrical switch only, or bundled with the lock cylinder. Before ordering, confirm whether your problem is electrical (the switch) or mechanical (the cylinder), since they are separate components on most Fargo P200 Parcel Delivery applications. Also verify whether your Fargo P200 Parcel Delivery requires a switch with a specific number of positions or integrated anti-theft/passlock contacts.
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement Switch (electrical only) | Vehicles where the lock cylinder and key are still good | Direct plug-and-play fit; matches original connector, position contacts, and passlock wiring exactly |
| Switch + Lock Cylinder Kit | Vehicles with a worn or damaged lock cylinder, or a lost/broken key | Complete assembly including matched key; eliminates need to rekey or source parts separately |
| Standard/Economy Grade | High-mileage vehicles or budget repairs where longevity is secondary | Meets minimum OE specs at lower cost; suitable when resale value is low |
| Premium / OEM-Spec Grade | Daily drivers, newer vehicles, or cases with prior switch failures | Heavier-duty contacts, better heat resistance, and longer service life under repeated use |
Replacing an ignition switch on a Fargo P200 Parcel Delivery typically involves removing the steering column trim panels to expose the switch housing, disconnecting the electrical connector, and unbolting or unclipping the old switch before installing the new one in reverse order. Disconnect the negative battery terminal before starting to prevent accidental shorts, particularly important on vehicles with airbag wiring routed near the column. If your Fargo P200 Parcel Delivery has a passlock or immobilizer system, perform any required security relearn procedure after installation before attempting to start the engine.