Loading...

Ferrari 512 M Oxygen Sensors

Ferrari 512 M Oxygen sensors

Starting at low prices, AutoBuffy stocks multiple oxygen sensors from top OE-quality brands to fit your Ferrari 512 M. The oxygen sensor measures exhaust oxygen levels so the ECU can fine-tune the air-fuel mixture for clean, efficient combustion. A failing sensor forces the engine to guess, killing fuel economy, spiking emissions, and eventually damaging your catalytic converter.

Signs your Ferrari 512 M needs a new oxygen sensor

  • Check Engine light on with a stored P0130–P0167 or P0036–P0058 diagnostic trouble code
  • Noticeable drop in fuel economy — engine runs rich or lean without correction
  • Rough idle or engine hesitation caused by an incorrect air-fuel mixture
  • Failed emissions or smog test due to out-of-range exhaust readings
  • Rotten-egg or sulfur smell from the exhaust, indicating a rich-running condition
  • Black, sooty exhaust smoke or a fouled spark plug on the affected cylinder bank

Which oxygen sensor should you buy for your Ferrari 512 M?

The two biggest decisions are sensor position (upstream/downstream) and wire count, both of which must match your Ferrari 512 M's harness exactly. Beyond fitment, you'll choose between OE-identical direct-fit sensors and universal sensors that require splicing — direct-fit is almost always the better choice for a clean, reliable repair.

Upstream (Air-Fuel Ratio) Sensor
Best for
Restoring fuel trims and fuel economy on your Ferrari 512 M
What you get
Monitors pre-catalyst exhaust; directly controls ECU fueling corrections
Downstream (Monitor) Sensor
Best for
Fixing post-cat codes and emissions test failures on your Ferrari 512 M
What you get
Reads catalytic converter efficiency; triggers MIL if converter degrades
Direct-Fit OE-Style Sensor
Best for
Plug-and-play replacement with no wiring work on your Ferrari 512 M
What you get
Pre-terminated connector matches factory harness; no splicing or recalibration needed
Universal Wideband Sensor
Best for
Budget repair or custom tuning builds where exact fitment isn't available
What you get
Requires wire splicing; works across multiple applications but adds installation time

Replacing the oxygen sensor on a Ferrari 512 M

Easy⏱ 30–90 minutesOBD-II scanner (to read and clear codes)Oxygen sensor socket (6-point, slotted for wire clearance)Ratchet and extensionPenetrating oil (for stubborn or corroded sensors)Safety gloves and eye protection

Let the exhaust cool completely before starting, then spray the sensor threads with penetrating oil if the Ferrari 512 M has significant mileage or rust. Remove the old sensor with the dedicated oxygen sensor socket, thread the replacement in by hand first to avoid cross-threading, and snug it firmly — overtightening can crack the sensor body or damage the bung. Reconnect the harness, clear fault codes with your scanner, and run the engine through a full warm-up cycle to confirm the repair.

Frequently asked questions

How much does it cost to replace oxygen sensors on a Ferrari 512 M?
Parts start at low prices at AutoBuffy. A single direct-fit upstream or downstream sensor typically covers most of the cost; shops generally charge one to two hours of labor on top of that. Doing it yourself with basic tools keeps the total repair cost close to the part price alone.
How many oxygen sensors does a Ferrari 512 M have?
Most four-cylinder Ferrari 512 M models have two oxygen sensors — one upstream before the catalytic converter and one downstream after it. V6 and V8 engines with dual exhaust banks typically have four sensors, two per bank. Check your specific 512 M configuration before ordering to make sure you replace the correct one.
Can I drive my Ferrari 512 M with a bad oxygen sensor?
You can drive short distances, but it is not advisable. A faulty sensor forces the ECU into open-loop fueling, which wastes fuel, increases emissions, and can overheat the catalytic converter within weeks. Continuing to drive your Ferrari 512 M with a confirmed bad sensor risks a far more expensive catalytic converter replacement.
Will replacing the oxygen sensor fix my Ferrari 512 M's check engine light?
If a scan confirms an oxygen sensor fault code — such as P0130–P0167 for circuit faults or P0036–P0058 for heater circuit faults — replacing the correct sensor and clearing the code will resolve the light in most cases. Always verify with a rescan after the repair to confirm no additional codes are present on your Ferrari 512 M.
How long do oxygen sensors last on a Ferrari 512 M?
Conventional heated oxygen sensors generally last between 60,000 and 100,000 miles on most vehicles. Wideband and air-fuel ratio sensors on newer 512 M variants can last longer but are more sensitive to oil burning or coolant leaks. Using quality fuel and keeping up with oil changes maximizes sensor lifespan on your Ferrari 512 M.
Do I need to reprogram or reset anything after installing a new oxygen sensor on a Ferrari 512 M?
No programming is required for a standard direct-fit replacement on your Ferrari 512 M. After installation, clear the stored fault codes with an OBD-II scanner and drive through one or two complete warm-up cycles so the ECU can relearn fuel trims. Some 512 M variants may require a specific drive cycle before the readiness monitor sets and the MIL clears.

More parts for your Ferrari 512 M

Barometric Pressure Sensor ConnectorSpark PlugIgnition CoilBrake Pad Set

Oxygen sensors for other Ferrari models

Ferrari 348 TBFerrari 308 GTBFerrari 512 TRFerrari F355 BerlinettaFerrari TestarossaFerrari 456 M