Loading...

Fiat 124 Turn Signal Flashers

Fiat 124 Turn signal flashers

Turn signal flashers for your Fiat 124 start at $16.95, with 1 units in stock from brands including Standard Ignition. The flasher relay controls the timing and rhythm of your turn signals and hazard lights. When it fails, signals may stop blinking, blink too fast, or stay on solid — a safety hazard and a likely inspection failure.

Signs your Fiat 124 needs a new turn signal flasher

  • Turn signals blink faster than normal on one or both sides (hyper-flash)
  • Turn signals click but the indicator light stays solid without flashing
  • Hazard lights stop flashing or flash unevenly
  • No clicking sound from the dashboard when the turn signal is activated
  • Turn signal indicator light on the dash does not illuminate at all
  • Signals work intermittently, cutting out and returning on their own

Which turn signal flasher should you buy for your Fiat 124?

The main decisions are OE-style thermal versus electronic flasher, and whether your Fiat 124 uses a combined hazard/turn flasher or separate units. If your Fiat 124 has LED turn signals — factory or aftermarket — you need an LED-compatible electronic flasher to prevent hyper-flash; a standard thermal unit will not work correctly.

OE Replacement (Thermal)
Best for
Vehicles with all-incandescent bulbs staying stock
What you get
Plug-and-play fit, load-dependent blink rate, low cost
Electronic (Solid-State)
Best for
Vehicles with LED turn signal bulbs (factory or converted)
What you get
Fixed blink rate regardless of bulb load, eliminates hyper-flash
Combination Hazard/Turn Unit
Best for
Vehicles that use a single relay for both functions
What you get
Replaces both turn signal and hazard flash in one unit, restores full functionality
Heavy-Duty / Trailer-Ready
Best for
Vehicles that tow and run added trailer lighting
What you get
Handles higher amperage loads without triggering fast-flash from the extra bulbs

Turn signal flashers brands we stock for your Fiat 124

Standard Ignition
1 option · from $16.95

Replacing a turn signal flasher on a Fiat 124

Easy⏱ 15–45 minutesTrim panel removal tool or flathead screwdriverNeedle-nose pliers (for tight relay sockets)Flashlight or work lightOwner's manual or fuse box diagram

Locate the flasher relay using the fuse box diagram — it is usually a small plug-in relay in the interior or engine-bay fuse block. With the ignition off, pull the old relay straight out, press the replacement firmly into the same socket until it seats, then test the turn signals and hazards before reassembling any trim panels. No special tools or calibration are required for a direct OE-style replacement.

Frequently asked questions

How much does it cost to replace turn signal flashers on a Fiat 124?
Parts start at $16.95 for a Fiat 124 turn signal flasher. The part itself is typically inexpensive, and because access is usually straightforward, labor is minimal if you choose a shop. Many owners replace the flasher themselves in under 30 minutes, keeping total cost close to the part price alone.
Can a bad turn signal flasher cause both the turn signals and hazards to stop working on a Fiat 124?
Yes. Many Fiat 124 designs use a single combination flasher relay that controls both turn signals and hazard lights. If that unit fails, both systems stop functioning at the same time. Replacing the one flasher unit restores both functions simultaneously, which is why losing hazards and turns together is a reliable sign the flasher is the culprit.
Why do my Fiat 124 turn signals blink fast after replacing a bulb?
Fast blinking — called hyper-flash — happens because a thermal flasher measures electrical load to time its blink rate. An LED bulb draws significantly less current than an incandescent, so the flasher interprets the low load as a burned-out bulb and speeds up. Swapping to an electronic or LED-compatible flasher fixes this without reverting to incandescent bulbs.
Where is the turn signal flasher located on a Fiat 124?
Location varies by generation of 124, but the flasher relay is most commonly found in the interior fuse and relay box under the dashboard, the engine-bay fuse box, or plugged into a dedicated bracket near the steering column. Checking the owner's manual or the fuse box diagram on the panel cover is the fastest way to confirm the exact slot.
How do I know if my Fiat 124 has a bad flasher versus a burned-out bulb?
A burned-out bulb typically causes hyper-flash on only one side and the affected external light will be visibly dark. A failed flasher more often kills the flash function on both sides, or causes the relay to produce no click sound at all. Inspect all four corner lights first; if the bulbs look intact and the problem affects multiple signals, suspect the flasher.
Is it safe to drive a Fiat 124 with a faulty turn signal flasher?
Non-functioning turn signals are a safety risk and a moving violation in most jurisdictions. Other drivers and pedestrians rely on your signals to anticipate lane changes and turns. A failed flasher should be treated as an urgent repair, not a deferred maintenance item. The part is low-cost and the fix is typically quick, so there is little reason to delay.

Shop turn signal flashers by year for the Fiat 124

1981198019791978

More parts for your Fiat 124

Fuel Pump Cut-Off SwitchMulti-Purpose Electrical ConnectorBrake CaliperTie Rod EndFuel InjectorIgnition Coil Mounting BracketEngine Air FilterBrake Pad & Rotor Kit

Turn signal flashers for other Fiat models

Fiat 131Fiat 128Fiat BravaFiat X-1/9Fiat Strada