Loading...

Gmc Sierra Engine Oil Filler Tubes

Gmc Sierra Engine oil filler tubes

Starting at $16.95, AutoBuffy stocks 2 engine oil filler tubes from SKP and Dorman for the Gmc Sierra. The oil filler tube channels oil from the cap opening down into the engine block during refills. A cracked, broken, or missing tube causes oil mist to escape the engine bay, leading to burning smells, underhood mess, and potential low-oil damage if left unaddressed.

Signs your Gmc Sierra needs a new engine oil filler tube

  • Oily residue or splatter around the valve cover or filler opening after driving
  • Burning oil smell from the engine bay, especially after adding fresh oil
  • Visible crack, split, or chunk missing from the plastic or metal tube body
  • Oil filler cap sits loose, rocks side-to-side, or no longer seals snugly because the tube neck is damaged
  • Oil level drops faster than expected with no external drip below the vehicle
  • Check Engine or oil pressure warning light triggered by vapor escaping into the intake or PCV system

Which engine oil filler tube should you buy for your Gmc Sierra?

The main decision is whether to match the factory material and routing or upgrade to a more durable aftermarket unit. Some Gmc Sierra engines use a simple straight tube while others use an angled or multi-piece assembly, so confirming your exact engine code before ordering is essential.

OEM-Equivalent Replacement
Best for
Drivers who want a direct, no-hassle swap
What you get
Matches factory material, length, and fittings exactly; installs without modification
Heavy-Duty Plastic Aftermarket
Best for
High-mileage vehicles prone to heat cracking
What you get
Thicker walls and UV-stabilized plastic that resists the heat cycles that crack OEM tubes
Aluminum or Steel Tube
Best for
Performance builds or repeated overheating histories
What you get
Near-zero expansion, handles sustained high underhood temps; may require minor fitting adjustments
Complete Kit (tube + cap + seal)
Best for
Tubes with a damaged or missing cap and deteriorated base O-ring
What you get
Replaces every wear point in one purchase, preventing a second job to source the cap separately

Engine oil filler tubes brands we stock for your Gmc Sierra

SKP
1 option · from $18.95
Dorman
1 option · from $16.95

Replacing the engine oil filler tube on a Gmc Sierra

Easy⏱ 30–60 minutesSocket set and ratchetFlathead and Phillips screwdriversPliers or hose-clamp pliersShop rags or absorbent mat

Start with a cool engine, then locate the filler tube where it attaches to the valve cover or block and disconnect any retaining bracket, clamp, or clip holding it in place. Pull the old tube straight out, taking note of any O-ring or gasket at the base that must be transferred or replaced on the new tube. Press or bolt the new tube into position, reattach all brackets, install a fresh oil filler cap, and verify the fit is snug before adding oil.

Frequently asked questions

How much does it cost to replace engine oil filler tubes on a Gmc Sierra?
Parts start at $16.95 on AutoBuffy. A shop typically charges one to two hours of labor on top of the part cost. Because the tube is usually accessible without major disassembly, total repair cost stays modest compared to most engine jobs, and many owners handle it as a DIY task.
Can I drive my Gmc Sierra with a cracked or broken oil filler tube?
You can drive short distances, but it is not advisable. A damaged tube allows oil mist and vapor to escape the sealed crankcase. Over time this deposits oily grime on hot engine surfaces, creates a fire risk near exhaust components, and can disrupt the PCV system, leading to rough idle or increased oil consumption.
Is the engine oil filler tube the same as the oil dipstick tube on a Gmc Sierra?
No, they are separate components. The oil filler tube leads to the cap where you pour in fresh oil. The dipstick tube is a narrower passage that houses the dipstick used to check oil level. On some engines both tubes share a bracket or are located close together, but they are not interchangeable.
What causes the oil filler tube to crack or break on a Gmc Sierra?
Plastic tubes degrade from repeated heat cycles and long-term exposure to underhood temperatures. Physical impact during oil changes — from a dropped cap, a misplaced tool, or forcing an ill-fitting funnel — is the most common cause of sudden cracks. Age-hardened plastic becomes brittle and snaps with minimal force.
Do I need to drain the oil before replacing the engine oil filler tube on a Gmc Sierra?
In most cases, no. The filler tube sits above the oil level in the engine, so simply replacing it at operating temperature without draining is safe. However, if the base of the tube is sealed with an O-ring or gasket that sits below the valve cover surface, letting the engine cool first reduces the chance of a minor drip.
How do I make sure the replacement oil filler tube fits my Gmc Sierra?
Confirm your exact engine displacement and code before ordering — the Gmc Sierra may have been offered with more than one engine option across the 2007–2013 production run, and tube length, diameter, and attachment style often differ between them. Using the year, engine size, and VIN decoder on AutoBuffy's fitment tool eliminates guesswork.

Shop engine oil filler tubes by year for the Gmc Sierra

2013201220112010200920082007

More parts for your Gmc Sierra

Antenna MastEngine Coolant Thermostat Housing AssemblyFuel Tank StrapFuel Injection Throttle BodyPower Steering CoolerEngine Wiring Harness ConnectorABS Wheel Speed Sensor ConnectorIgnition Coil Connector

Engine oil filler tubes for other Gmc models

Gmc W3500 ForwardGmc Sierra 1500Gmc Sierra 1500 ClassicGmc Envoy XLGmc EnvoyGmc Sierra 2500 HD Classic