Loading...
Side marker lights for your Gmc Sonoma start at $3.95, with 2 options in stock from TYC. Side marker lights are small amber or red lamps mounted on the front and rear corners of the vehicle that make it visible to drivers approaching from the side, especially at night or in low visibility. A burned-out or cracked marker light is a failed safety item and a citable equipment violation in most states.
The main decision is whether you need to replace just the bulb, the complete housing assembly, or upgrade to an LED unit. Position also matters — front side markers are amber and rear side markers are red, and they are not interchangeable. Make sure the part you select matches the correct side (driver or passenger) and location (front or rear) for your Gmc Sonoma.
| Option | Best for | What you get |
|---|---|---|
| OEM-replacement bulb only | Housing is intact and socket is clean; lowest-cost fix | Exact wattage and color match; direct swap in minutes with no tools on most vehicles |
| Complete OEM-style housing assembly | Cracked, broken, or moisture-damaged lens that can't be resealed | New lens, new bulb, and new gasket in one unit; restores factory appearance and weatherproofing |
| LED conversion bulb (plug-in) | Owners who want brighter output and longer bulb life without modifying wiring | Significantly brighter than incandescent; runs cooler; may require a load resistor if the vehicle monitors bulb resistance |
| Full LED housing assembly | Restoration builds, custom looks, or repeated bulb failures in the same housing | Integrated LED board with no replaceable bulb; longest service life; may require minor wiring adaptation |
On most Gmc Sonoma applications, the side marker housing is retained by one or two screws, a single bolt accessed from inside the wheel well, or a push-and-twist retainer that releases from behind the bumper fascia — no special tools are required. Once the housing is removed, the bulb socket twists out counterclockwise, the old bulb pulls straight out, and the new bulb seats with a firm push and a clockwise turn to lock. Reconnect the socket, verify the light illuminates with parking lights on, and reinstall the housing snugly against its gasket to maintain the weather seal.