Loading...

Jaguar Xj6 Subframe Bushings

Jaguar Xj6 Subframe bushings

Subframe bushings for your Jaguar Xj6 start at $68.95, and AutoBuffy stocks 1 options from brands including URO. These rubber or polyurethane sleeves isolate the subframe from the unibody, absorbing road vibration and keeping suspension geometry precise. When they crack or collapse, handling becomes unpredictable and metal-to-metal contact accelerates wear throughout the front or rear suspension.

Signs your Jaguar Xj6 needs new subframe bushings

  • Clunking or thudding noise from under the cabin during acceleration, braking, or hitting bumps — especially noticeable at low speeds
  • Vague or wandering steering that feels disconnected from the road, often worse on highway sweeping curves
  • Vibration felt through the floorboard or seat that was not present before, particularly under hard acceleration
  • Uneven or rapid tire wear caused by suspension geometry shifting as the subframe moves under load
  • Pulling to one side during braking as the subframe shifts laterally instead of staying fixed
  • Visible cracking, tearing, or complete separation of the rubber bushing material when inspected with a flashlight from underneath

Which subframe bushings should you buy for your Jaguar Xj6?

The main choice is material: OEM-style rubber restores factory ride quality and noise isolation, while polyurethane increases stiffness and durability at the cost of more NVH transmitted into the cabin. Position also matters — front subframe bushings handle more stress from steering loads than rear ones, so verify the kit covers the correct location for your Jaguar Xj6.

OEM-replacement rubber
Best for
Daily drivers, comfort-focused owners
What you get
Factory-matched compliance, quiet ride, straightforward installation with no special grease required
Polyurethane (street grade)
Best for
Enthusiast drivers, spirited street use
What you get
Greater stiffness and longevity than rubber, improved steering response, some increase in vibration felt in the cabin
Polyurethane (competition/firm)
Best for
Track days, performance builds
What you get
Maximum subframe rigidity and geometry retention, significant NVH increase, not recommended for daily commuting
Complete subframe bushing kit
Best for
High-mileage vehicles, full refresh
What you get
All front or rear positions in one box, ensures matched compliance across the subframe, avoids mixing old and new bushing stiffness

Subframe bushings brands we stock for your Jaguar Xj6

URO
1 option · from $68.95

Replacing subframe bushings on a Jaguar Xj6

Advanced⏱ 2–4 hoursFloor jack and jack stands rated for vehicle weightHydraulic press or bushing press tool kitSocket and ratchet set with breaker barPry barTorque wrench

Safely raise and support the Jaguar Xj6, then support the subframe independently before loosening the subframe mounting bolts to relieve load from the bushings. Use a hydraulic press or bushing press tool to drive out the old bushings and press in the replacements squarely — a cocked bushing will fail prematurely. Reinstall the subframe, torque all mounting hardware to specification per your service manual, and schedule a four-wheel alignment before returning the vehicle to normal use.

Frequently asked questions

How much does it cost to replace subframe bushings on a Jaguar Xj6?
Parts alone start at $68.95 for a Jaguar Xj6 at AutoBuffy. A full replacement including shop labor typically runs more once you factor in press time, since most subframe bushings require a hydraulic press to remove and reinstall. Doing it yourself saves the most if you have access to the right equipment.
How long do subframe bushings last on a Jaguar Xj6?
On most vehicles, rubber subframe bushings last somewhere between 80,000 and 150,000 miles under normal conditions. Road salt exposure, aggressive driving, and frequent heavy loads shorten that range significantly. Polyurethane units generally outlast rubber but should be inspected periodically for dryness and cracking.
Can I drive my Jaguar Xj6 with worn subframe bushings?
You can drive short distances, but it is not advisable. Collapsed subframe bushings allow the subframe to shift under load, which alters steering geometry, accelerates tire wear, and puts stress on surrounding suspension components. If the bushing has failed completely, metal-to-metal contact can damage the subframe mounting points themselves.
Do I need an alignment after replacing subframe bushings on a Jaguar Xj6?
Yes, a four-wheel alignment is strongly recommended after subframe bushing replacement. Even small shifts in subframe position directly affect camber, caster, and toe settings. Skipping the alignment risks rapid or uneven tire wear and handling that does not match what the new bushings should deliver.
Are subframe bushings the same as control arm bushings on a Jaguar Xj6?
No, they are different components. Subframe bushings mount the entire subframe cradle to the vehicle body, while control arm bushings connect individual control arms to the subframe. Both affect ride and handling, but subframe bushings have a broader effect on overall suspension geometry and noise isolation than control arm bushings alone.
Is replacing subframe bushings a DIY job on a Jaguar Xj6?
It is possible but considered an advanced DIY task. Most subframe bushings are pressed in and require a hydraulic press or a quality bushing press tool kit to remove and seat correctly. The subframe must also be safely supported while the vehicle is raised. Improper installation can leave the bushing cocked or incompletely seated, causing premature failure.

Shop subframe bushings by year for the Jaguar Xj6

199719961995

More parts for your Jaguar Xj6

Radiator MountStabilizer Bar BushingEngine Oil FilterExhaust Gas Recirculation (EGR) ValveVehicle BatteryBack Glass SealFog Light SocketIgnition Coil Kit

Subframe bushings for other Jaguar models

Jaguar XFJaguar X-TypeJaguar XK8Jaguar E-PaceJaguar XJ12Jaguar F-Pace