Loading...
Starting at $29.95, AutoBuffy stocks 2 engine coolant pipes for the Jaguar Xjr from trusted brands including URO. The coolant pipe routes pressurized coolant between the engine, heater core, and radiator. When it cracks, corrodes, or its O-rings fail, coolant leaks out, cabin heat drops, and the engine risks overheating and serious damage.
The main decisions are material, position in the system, and whether you need just the pipe or a kit that includes O-rings and clamps. Coolant pipes on the Jaguar Xjr can be rigid metal, molded plastic, or a combination, and replacing like-for-like material ensures the same heat tolerance and fit. Always confirm whether the part serves the heater inlet, heater outlet, or the engine-to-radiator circuit, as each is a distinct part number.
| Option | Best for | What you get |
|---|---|---|
| OE-equivalent replacement pipe | Drivers who want a direct, confirmed fit with factory routing and connection points | Matched diameter, bends, and end fittings; typically includes new O-rings or gaskets |
| Metal (steel or aluminum) pipe | High-mileage or high-heat applications where plastic pipes have already failed once | Greater heat and pressure resistance, longer service life, resistant to UV and ozone cracking |
| Plastic or nylon composite pipe | Budget-conscious repairs on vehicles where the factory spec is plastic | Lightweight, corrosion-proof, lower cost; adequate for normal operating pressures when OE spec |
| Pipe-and-O-ring kit | Complete repairs where O-rings, clips, or clamps are also worn or leaking at the joints | Saves a second disassembly; ensures all sealing surfaces are renewed at the same time |
Drain the cooling system to below the pipe's level before disconnecting anything, then release clamps, clips, or retaining brackets and pull the old pipe free. Install the new pipe with fresh O-rings lightly lubricated with clean coolant, secure all clamps and brackets to a snug fit, then refill and bleed the cooling system according to the Jaguar Xjr service procedure. Run the engine to operating temperature, check for leaks at every connection, and recheck the coolant level after the thermostat opens.