Loading...
Leaf spring bolts for your Kenworth L700 start at $72.95, and AutoBuffy stocks 1 options from MOOG. These fasteners clamp the leaf spring pack together and secure it to the axle U-bolt plates and shackle mounts. When they corrode, stretch, or shear, the spring assembly shifts under load, causing dangerous handling changes and accelerating wear on surrounding suspension components.
Leaf spring bolts are not one-size-fits-all — diameter, thread pitch, length, and grade all vary by application. Beyond fitment, the main decision is between OE-equivalent replacement hardware and upgraded high-strength or coated fasteners, which matters most if you tow, haul heavy loads, or live in a high-corrosion environment.
| Option | Best for | What you get |
|---|---|---|
| OE-Equivalent Grade 5 / Grade 8 Replacement | Daily drivers restoring stock suspension function | Correct factory diameter, thread pitch, and length; meets original torque spec; typically zinc plated for basic corrosion resistance |
| High-Strength Grade 10.9 / Grade 12.9 Metric or SAE Equivalent | Trucks and vans used for towing, hauling, or off-road use | Higher tensile and proof load ratings than OE; resists stretch and shear under repeated heavy-load cycles |
| Stainless Steel Leaf Spring Bolts | Vehicles in salt-belt regions or frequent off-road water crossings | Excellent corrosion resistance; lower tensile strength than alloy grades, so best on light-duty or mild-use applications |
| Complete U-Bolt and Center Pin / Bolt Kit | Any repair where the full spring pack is disassembled or U-bolts are also due for replacement | Includes center pin bolt, U-bolts, nuts, and washers as a matched set; eliminates mismatched hardware and simplifies the job |
Support the vehicle frame securely on jack stands and allow the rear axle to hang free so spring tension is relieved before removing any fasteners. Soak corroded bolts with penetrating oil well in advance to reduce the risk of snapping a bolt in the mount. Torque all new fasteners to the manufacturer's specification for your Kenworth L700 with the suspension at normal ride height, not with the axle hanging, so rubber bushings are not preloaded in a twisted position.