Loading...

Lincoln Mark Vi Steering Pitman Arms

Lincoln Mark Vi Steering pitman arms

Steering pitman arms for your Lincoln Mark Vi start at $15.95, with 6 options in stock from Dorman, SKP, and Delphi. The pitman arm is the link between your steering gearbox output shaft and the drag link, converting the gearbox's rotational motion into the lateral force that turns your wheels. A worn or loose pitman arm causes imprecise steering, dangerous wandering, and accelerated wear on every connected steering component.

Signs your Lincoln Mark Vi needs a new steering pitman arm

  • Steering wheel has noticeable free play or a 'dead zone' before the wheels respond
  • Front end wanders or drifts on straight roads without any input from you
  • Clunking or knocking sound from the front end when turning or hitting bumps
  • Uneven or rapid tire wear on the front axle, particularly on the inner or outer edges
  • Loose or sloppy feeling when making low-speed turns, such as in parking lots
  • Visible play in the pitman arm joint when a helper turns the wheel with the vehicle on a lift

Which steering pitman arm should you buy for your Lincoln Mark Vi?

The most important decisions are fit and construction quality. Pitman arms are highly vehicle-specific — the spline count, sector shaft diameter, and drag link connection geometry must exactly match your Lincoln Mark Vi's steering gearbox. Beyond fit, choose between OE-replacement and heavy-duty forged options depending on how your Lincoln Mark Vi is used.

OE-Replacement (Standard)
Best for
Daily drivers keeping stock ride and steering feel
What you get
Direct factory-spec fit, correct geometry, pre-greased or greaseable joint, straightforward swap
Heavy-Duty Forged Steel
Best for
Trucks, SUVs, tow vehicles, or high-load applications
What you get
Thicker cross-section, superior fatigue resistance under stress, longer service life under heavy use
Adjustable / Variable-Length
Best for
Lifted vehicles or those with suspension geometry corrections needed
What you get
Allows drag link angle correction after a lift kit install, reduces bump steer on raised Lincoln Mark Vis
Remanufactured
Best for
Budget-conscious owners who need a reliable fix
What you get
Rebuilt to OE spec at lower cost, acceptable for normal use but verify warranty and return policy before buying

Steering pitman arms brands we stock for your Lincoln Mark Vi

Dorman
2 options · from $28.95
SKP
1 option · from $15.95
Delphi
1 option · from $62.95
Mevotech Original Grade
1 option · from $18.95
Mevotech Supreme
1 option · from $25.95

Replacing the steering pitman arm on a Lincoln Mark Vi

Moderate⏱ 1–2 hoursDedicated pitman arm puller (not a pickle fork)Breaker bar or impact wrenchSocket set and combination wrenchesTorque wrenchPenetrating oil

Raise and support the Lincoln Mark Vi safely, then disconnect the drag link from the pitman arm and use a dedicated pitman arm puller to separate the arm from the sector shaft — do not use a pickle fork, as it damages the drag link socket. Mark the shaft orientation before removal, align the new arm to the index marks, and tighten the retaining nut to manufacturer specification with a torque wrench. A professional wheel alignment is required after this repair.

Frequently asked questions

How much does it cost to replace steering pitman arms on a Lincoln Mark Vi?
Parts start at $15.95 for your Lincoln Mark Vi. Add shop labor — typically one to two hours of time — and total replacement cost varies by region and shop rate. Replacing the pitman arm at the same time as a drag link or tie rod service reduces overall labor cost since the front end must be aligned afterward regardless.
Is it safe to drive my Lincoln Mark Vi with a worn pitman arm?
No. A worn pitman arm is a safety risk, not just a handling nuisance. If the joint fails completely, you can lose directional control of the Lincoln Mark Vi. Even minor wear creates unpredictable steering response. Limit driving and have the part replaced promptly — this is not a component to defer.
Does replacing the pitman arm on a Lincoln Mark Vi require a wheel alignment?
Yes, always. Removing and reinstalling the pitman arm and drag link disturbs front-end geometry. Even a small difference in reinstallation position changes toe and steering center. Schedule a four-wheel alignment immediately after the repair to protect your tires and restore accurate steering on your Lincoln Mark Vi.
How long does a pitman arm last on a Lincoln Mark Vi?
Service life varies widely depending on road conditions, load, and whether the joint is greaseable. On well-maintained vehicles used on paved roads, pitman arms often last the life of the vehicle. Off-road use, towing, or neglected lubrication accelerates wear. Inspect the joint for play and looseness at every suspension service.
Can I replace the pitman arm on my Lincoln Mark Vi myself?
It is a moderate DIY job. You need a pitman arm puller — a standard pickle fork damages the joint and should not be used. The sector shaft splines are tight and require proper tooling to separate. If you are comfortable with suspension work and have the right tools, it is manageable, but a post-repair alignment requires a shop.
How do I know if my Lincoln Mark Vi has a pitman arm or a rack-and-pinion steering system?
Vehicles with a recirculating-ball or worm-gear steering gearbox use a pitman arm. Rack-and-pinion systems do not. Trucks, body-on-frame SUVs, and older vehicles typically use a gearbox with a pitman arm. Check under your Lincoln Mark Vi — if you see a sector shaft coming out of a steering box, you have a pitman arm system.

Shop steering pitman arms by year for the Lincoln Mark Vi

1983198219811980

More parts for your Lincoln Mark Vi

A/C Clutch Cycle SwitchEngine Timing Chain KitStarter SolenoidBrake Rotor SetAir Charge Temperature Sensor ConnectorControl Arm BumperVehicle Speed SensorEngine Timing Chain

Steering pitman arms for other Lincoln models

Lincoln Mark IIILincoln ContinentalLincoln NavigatorLincoln Town CarLincoln Blackwood