Loading...
Air suspension kits for the Lincoln Mark Viii start at $362.95, with 5 options in stock from Westar. An air suspension kit replaces or rebuilds the factory air springs, compressor, and related components that support vehicle weight and maintain ride height. When the system fails, the Lincoln Mark Viii sags, rides rough, and can suffer alignment damage or compressor burnout if ignored.
The main decision is whether to repair the existing air system with OE-style replacement parts or convert it to passive coil springs or struts. Within air suspension, kits vary by what is included — air springs only, air springs plus compressor, or a complete system. Match the kit scope to which components have actually failed on your Lincoln Mark Viii to avoid overspending.
| Option | Best for | What you get |
|---|---|---|
| Air Spring(s) Only | Compressor is still functional; only bags or bellows have ruptured or cracked | Replacement air bladder or sleeve matched to the Lincoln Mark Viii's OE ride height and load rating |
| Air Spring + Compressor Kit | Both the bags and compressor show wear or the compressor has been overworked due to a slow leak | New air springs and a matched replacement compressor, reducing repeat failure risk |
| Complete Air Suspension Kit | High-mileage Lincoln Mark Viii with aging lines, sensors, and multiple failing components | Air springs, compressor, air lines, fittings, and sometimes height sensors for a full-system refresh |
| Air-to-Coil Conversion Kit | Owner wants to eliminate air system complexity permanently and lower long-term maintenance cost | Passive coil springs or strut assemblies engineered to fit the Lincoln Mark Viii's existing mounts, trading adaptive ride for reliability |
Replacing an air suspension kit on the Lincoln Mark Viii involves depressurizing the system before disconnecting any air lines, then unbolting the air spring from both the upper mount and lower control arm or axle before removing electrical connectors from height sensors and the compressor. Complete kits require methodical routing of new air lines to avoid contact with exhaust or moving parts. After installation, the system should be pressurized, inspected for leaks at all fittings, and fault codes cleared before a final ride-height check.