Loading...
Starting at $92.95, AutoBuffy stocks 1 automatic headlight control relays from Standard Ignition. This relay acts as the switching bridge between your Lincoln Town Car's ambient light sensor and the headlight circuit, automatically turning lights on at dusk and off at dawn. When it fails, your automatic headlights stop responding, leaving you driving dark or with lights stuck on permanently.
The main decision is whether to match OE specifications exactly or accept a universal-fit equivalent. Some Lincoln Town Car applications use a sealed, vehicle-specific relay module integrated with the BCM circuit, while others use a standard plug-in relay you can swap in seconds. Confirm your relay's pin count and coil voltage rating before ordering.
| Option | Best for | What you get |
|---|---|---|
| OEM-Equivalent (Direct Fit) | Owners who want plug-and-play replacement with no modifications | Exact pin layout, matched coil resistance, and confirmed fitment for your Lincoln Town Car — highest confidence, typically highest price |
| Aftermarket Standard Relay | Budget-conscious repairs where the relay form factor is a common 4- or 5-pin type | Functional replacement at lower cost; verify pin numbering and coil voltage rating matches your application |
| Relay + Ambient Light Sensor Kit | Cases where both the relay and sensor are suspected of failing together | Bundled parts save diagnostic time; useful if your Lincoln Town Car shows both slow sensor response and relay-related symptoms |
| Heavy-Duty / Upgraded Relay | High-mileage vehicles or climates with extreme heat or cold that stress relay contacts | Higher contact current rating and sealed housing resist corrosion and thermal fatigue better than standard relays |
Locate the correct relay using your Lincoln Town Car's fuse box diagram, disconnect the battery negative terminal as a precaution, then pull the old relay straight out and press the new one firmly into the same socket until it seats. Reconnect the battery, start the vehicle, and cover the ambient light sensor to simulate darkness and confirm the headlights activate automatically. No calibration is required in most direct-fit applications.