Loading...

Nissan 200Sx Wheel Bearing & Hub Kits

Nissan 200Sx Wheel bearing & hub kits

Starting at low prices, AutoBuffy stocks multiple wheel bearing & hub kits from top OE-quality brands to fit the Nissan 200Sx. A wheel bearing & hub kit supports the wheel's rotation while carrying the vehicle's load; when it fails, metal-on-metal contact accelerates rapidly, making safe driving impossible and risking wheel separation if ignored.

Signs your Nissan 200Sx needs a new wheel bearing & hub kit

  • Grinding, growling, or humming noise from one corner that changes pitch with vehicle speed
  • Noise shifts or disappears when you change lanes or sway the steering wheel slightly, indicating load transfer across a failing bearing
  • Loose or vague steering feel, or the wheel has noticeable play when grabbed at 9 and 3 o'clock and rocked
  • ABS warning light illuminated because the integrated wheel speed sensor in the hub assembly is damaged or sending erratic signals
  • Uneven or accelerated tire wear on one side caused by the wheel sitting at a slight angle from a worn bearing
  • Vibration felt through the floorboard or seat that intensifies above highway speeds and does not go away after a wheel balance

Which wheel bearing & hub kit should you buy for your Nissan 200Sx?

Most modern Nissan 200Sx hub assemblies are a sealed, pre-greased, bolt-on unit — no press or specialized bearing packing required. The main decisions are whether the hub includes an integrated ABS wheel speed sensor ring (match your original), which axle position you need, and what quality grade fits your budget and expected service life.

Economy / Value Grade
Best for
High-mileage vehicles, short-term budget repairs, or secondary-use vehicles
What you get
Meets OE fit and function at the lowest upfront cost; shorter rated service life than premium options
OE-Equivalent / Mid Grade
Best for
Daily drivers needing a reliable, direct replacement without dealership pricing
What you get
Factory-spec bearing preload, matching ABS tone ring, and a balance of cost and longevity
Premium / Heavy-Duty Grade
Best for
High-mileage daily drivers, towing and hauling applications, or harsh-climate use
What you get
Higher-grade steel races, upgraded seals against water and road salt, longer manufacturer warranty
Front Hub Assembly (with sensor)
Best for
Vehicles with ABS — front axle replacement
What you get
Integrated wheel speed sensor connector; plug-and-play ABS compatibility, no separate sensor purchase needed
Rear Hub Assembly
Best for
Rear-wheel or all-wheel drive axle service on the Nissan 200Sx
What you get
Sized for rear bearing loads; may or may not include ABS sensor ring depending on vehicle configuration — verify before ordering

Replacing the wheel bearing & hub kit on a Nissan 200Sx

Moderate1–2 hours per cornerFloor jack and jack standsImpact wrench or breaker bar for axle nut and hub boltsTorque wrenchWire brush for hub mounting surfacePenetrating oil for corroded bolts

After safely lifting and supporting the Nissan 200Sx and removing the wheel, unbolt the hub assembly from the steering knuckle and disconnect the ABS sensor harness before pulling the old unit free. Clean the knuckle mounting surface thoroughly, seat the new hub, and tighten the hub bolts and axle nut to the manufacturer's specification listed in your service manual — proper final torque on the axle nut is critical to bearing life. Reconnect the sensor harness, reinstall the wheel, lower the vehicle, and confirm the ABS warning light clears after a short test drive.

Frequently asked questions

How much does it cost to replace wheel bearing & hub kits on a Nissan 200Sx?
Parts start at low prices for a Nissan 200Sx wheel bearing & hub kit at AutoBuffy. Add shop labor of roughly one to two hours per corner at local shop rates, or save that cost by doing the job yourself — the bolt-on hub design on most modern vehicles makes DIY replacement realistic with basic tools.
How long do wheel bearings last on a Nissan 200Sx?
Sealed hub assemblies on most vehicles last somewhere between 85,000 and 150,000 miles under normal conditions. That range shortens significantly with frequent driving on unpaved roads, repeated water crossings, a prior curb or pothole impact, or if a CV axle nut was ever left under-torqued, which overloads the bearing preload.
Can I drive my Nissan 200Sx with a bad wheel bearing?
No — a failing wheel bearing should be treated as an urgent repair, not a wait-and-see situation. A worn bearing generates excessive heat, and in advanced failure the hub can seize or the wheel can separate from the vehicle entirely. If the ABS light is also on, brake assist may be compromised simultaneously.
Do I need to replace the wheel bearing on both sides at the same time on a Nissan 200Sx?
It is not strictly required, but replacing both sides is often recommended when one bearing fails at high mileage because the opposite side has the same age and wear history. If budget requires prioritizing one side, replace the failed bearing first and inspect the other side carefully for play, noise, and seal condition.
Will a bad wheel bearing on my Nissan 200Sx affect the ABS or stability control?
Yes, on most Nissan 200Sx applications the wheel speed sensor is integrated into the hub assembly. A failing bearing can damage the sensor ring or create air-gap inconsistencies that trigger ABS, traction control, or electronic stability control warning lights. Replacing the hub kit typically restores full sensor function without any additional parts.
Is a wheel bearing & hub kit the same as just a wheel bearing on my Nissan 200Sx?
No — a standalone wheel bearing is a loose race-and-ball set that must be pressed in and out of the knuckle with a hydraulic press. A hub kit is a pre-assembled, pre-greased sealed unit that bolts directly to the steering knuckle. Most all model years Nissan 200Sx models use the bolt-on hub assembly style for easier service.

More parts for your Nissan 200Sx

Wheel bearing & hub kits for other Nissan models