Loading...

Nissan Juke Radiator Mount Bushings

Nissan Juke Radiator mount bushings

Radiator mount bushings for your Nissan Juke start at $3.95, and AutoBuffy stocks 1 options from SKP. These small rubber or polyurethane insulators cushion the radiator against the support brackets, absorbing vibration and preventing metal-on-metal contact. When they crack or collapse, the radiator shifts under load, stressing hoses, tanks, and cooling line connections.

Signs your Nissan Juke needs new radiator mount bushings

  • Visible radiator movement or rocking when you rev the engine with the hood open
  • Clunking or thumping from the front of the engine bay over bumps or during acceleration
  • Coolant hose connections showing stress cracks or pulling loose at the radiator inlet and outlet
  • Cracked or split rubber visually apparent at the upper or lower radiator mounting points
  • Radiator tank corners contacting the support bracket directly, leaving shiny metal wear marks
  • Recurring coolant leaks at the radiator fittings that return after the fitting itself has been inspected and is not the source

Which radiator mount bushings should you buy for your Nissan Juke?

The main decisions are material and position. Rubber OE-style bushings restore factory ride quality and noise isolation, while polyurethane bushings last longer but transmit slightly more vibration. You also need to confirm whether your Nissan Juke uses upper bushings, lower cushions, or a full set covering both positions.

OE-Rubber Replacement
Best for
Daily drivers, comfort-focused owners, exact factory feel
What you get
Factory-matched durometer, quiet operation, easiest fitment, shortest lifespan of the four options
Polyurethane Upgrade
Best for
Higher-mileage vehicles, owners who want a long-lasting fix
What you get
Greater tear resistance, resists oil and heat degradation, slightly firmer feel, typically outlasts rubber 2-to-1
Upper Mount Bushings Only
Best for
Vehicles where inspection confirms only the upper insulators are worn or missing
What you get
Targeted repair at lower cost; correct choice when lower cushions are still pliable and intact
Complete Mount Bushing Kit (Upper + Lower)
Best for
Any vehicle with high mileage or unknown service history, best value for a thorough job
What you get
All mounting positions replaced at once, eliminates return visits, ensures even load distribution across the radiator

Radiator mount bushings brands we stock for your Nissan Juke

SKP
1 option · from $3.95

Replacing radiator mount bushings on a Nissan Juke

Easy⏱ 30–90 minutesSocket set and ratchetFlathead screwdriver or trim pry toolNeedle-nose pliersFlashlight or work light

Radiator mount bushing replacement is one of the more straightforward cooling system jobs. With the engine cool, you locate the upper radiator brackets at the core support, remove any retaining hardware or clips, press or pry out the old bushings, and seat the new ones by hand or with light mallet taps before reassembling the brackets. No special tools or coolant work are required for the bushings alone on most Nissan Juke applications.

Frequently asked questions

How much does it cost to replace radiator mount bushings on a Nissan Juke?
Parts alone start at $3.95 for a Nissan Juke set. A shop will typically add one to two hours of labor. Because access is straightforward on most vehicles, this is a repair many owners handle at home with basic hand tools, keeping the total cost close to the parts price.
How long do radiator mount bushings last on a Nissan Juke?
Rubber OE-style bushings typically last somewhere between 60,000 and 120,000 miles depending on climate, road conditions, and under-hood heat exposure. Polyurethane versions generally outlast rubber significantly. Bushings in hot climates or on vehicles driven on rough roads tend to degrade at the shorter end of that range.
Can I drive my Nissan Juke with worn radiator mount bushings?
Short-term driving is possible, but it is not advisable to ignore the problem. Without intact bushings, the radiator moves freely against metal brackets, which gradually cracks the plastic end tanks, fatigues hose connections, and can cause a sudden coolant loss. Repair costs rise sharply if the radiator itself is damaged as a result.
Are radiator mount bushings and radiator mounts the same thing?
Not always. On many vehicles the bushing is the replaceable rubber or polyurethane insert that sits inside a metal bracket. The bracket itself is the mount. You can often replace just the worn bushing without replacing the entire metal bracket, which is the less expensive repair when the bracket is undamaged.
Do I need to drain coolant to replace radiator mount bushings on a Nissan Juke?
In most cases, no. Upper and lower mount bushings are typically accessible without disconnecting coolant hoses, so a full drain is not required just to swap the bushings. However, if the radiator needs to be lifted or shifted significantly to reach a lower cushion, a partial drain adds a safety margin and prevents spills.
How do I know which radiator mount bushing position is worn on my Nissan Juke?
With the engine off and cool, have a helper rock the vehicle while you watch the radiator from the front, or grip the radiator core support lightly and look for movement at each corner. Worn bushings will show visible flex at that mounting point. Cracked or flattened rubber is also visible on direct inspection of each bracket.

Shop radiator mount bushings by year for the Nissan Juke

20172016201520142013

More parts for your Nissan Juke

Catalytic ConverterEngine Cooling Fan ModuleStabilizer Bar BushingA/C Refrigerant Discharge HoseEngine Conversion Gasket SetEngine Variable Valve Timing (VVT) SprocketShock AbsorberEngine Camshaft Position Sensor Connector

Radiator mount bushings for other Nissan models

Nissan AxxessNissan QuestNissan SentraNissan 350ZNissan StanzaNissan Altima