Loading...

Nissan Murano Drive Shafts

Nissan Murano Drive shafts

Drive shafts for your Nissan Murano start at $295.95, with 4 options in stock from brands including Dorman and SKP. The drive shaft transfers torque from the transmission or differential to the wheels, propelling the vehicle. When it fails, you lose power delivery entirely or experience dangerous vibration — neither should be ignored.

Signs your Nissan Murano needs a new drive shaft

  • Intense vibration felt through the floor or seat that worsens with vehicle speed
  • Loud clunking or banging noise when accelerating from a stop or shifting between drive and reverse
  • Clicking or knocking sound during turns, indicating worn universal or CV joints at the shaft ends
  • Visible wobble or runout in the shaft when inspected under the vehicle with it raised safely
  • Grease splattered inside the driveshaft tunnel or on the undercarriage near the shaft, pointing to a torn CV boot or failed U-joint seal
  • Complete loss of power to the driven wheels — the engine revs normally but the vehicle does not move

Which drive shaft should you buy for your Nissan Murano?

The right drive shaft depends on whether your Nissan Murano is front-wheel drive, rear-wheel drive, four-wheel drive, or all-wheel drive, because each layout uses a fundamentally different shaft design. You also need to decide between a remanufactured unit, a new aftermarket shaft, or an OEM-equivalent assembly. Each option trades cost, longevity, and installation effort differently.

Remanufactured (reman) shaft
Best for
Budget-conscious owners who still want a complete, pre-assembled unit
What you get
A cleaned and rebuilt OEM core with replaced U-joints or CV joints; core charge usually applies; balanced at the factory
New aftermarket shaft
Best for
Owners who want new components without OEM pricing
What you get
Freshly manufactured shaft with new joints and boots; no core charge; quality varies by brand so stick to known suppliers
OEM / OE-equivalent shaft
Best for
High-mileage or performance vehicles where fit and finish must be exact
What you get
Direct factory or factory-spec replacement; highest confidence in balance and durability; typically the most expensive option
Front half-shaft (CV axle shaft)
Best for
FWD or AWD vehicles replacing an individual axle rather than a driveshaft
What you get
Shaft with integrated inner and outer CV joints pre-packed with grease; simpler R&R than a full driveshaft assembly

Drive shafts brands we stock for your Nissan Murano

Dorman
2 options · from $622.95
SKP
2 options · from $295.95

Replacing a drive shaft on a Nissan Murano

Moderate1.5–3 hoursFloor jack and jack stands or a vehicle liftSocket set and breaker bar (metric and SAE)Pry bar or slide hammer for CV axle removalTorque wrenchDrain pan and shop rags

Replacing a drive shaft on a Nissan Murano involves safely lifting and supporting the vehicle, unbolting the shaft from the differential and transmission flanges (or popping out the CV axle from the hub and differential), and installing the new unit in reverse order. All flange bolts should be torqued to the manufacturer's specification found in a service manual for your specific Nissan Murano. CV axle half-shaft swaps are generally straightforward for a capable DIYer; full propeller shaft replacements on 4WD trucks are more involved and may benefit from professional alignment of the driveline angle afterward.

Frequently asked questions

How much does it cost to replace drive shafts on a Nissan Murano?
Parts alone start at $295.95 for a Nissan Murano drive shaft. Labor typically adds one to three hours of shop time on top of the part cost, depending on drivetrain layout and shaft location. Front half-shafts on FWD vehicles are generally quicker to swap than rear or center propeller shafts on RWD or 4WD platforms.
Can I drive my Nissan Murano with a bad drive shaft?
No — a failing drive shaft should be treated as an urgent repair, not a drive-until-it-breaks situation. A shaft that separates at speed can gouge the floor, puncture fuel or brake lines, or cause the vehicle to drop suddenly. If vibration or clunking has started, have the Nissan Murano inspected before driving it further.
How long does a drive shaft last on a Nissan Murano?
Drive shafts do not have a fixed replacement interval and often last the life of the vehicle under normal conditions. Premature failure on a Nissan Murano is usually caused by a torn CV or U-joint boot that lets grease escape and allows water and grit into the joint, accelerating wear. Off-road use or towing also shortens service life.
What is the difference between a drive shaft and a CV axle on a Nissan Murano?
On a Nissan Murano, the term 'drive shaft' most commonly refers to the longitudinal propeller shaft connecting a transmission or transfer case to a rear differential on RWD and 4WD layouts. A CV axle (half-shaft) is the shorter lateral shaft that carries torque from the differential to an individual wheel, most common on FWD and AWD vehicles.
Should I replace both drive shafts at the same time on my Nissan Murano?
For a propeller shaft on a RWD or 4WD Nissan Murano there is typically only one, so the question does not apply. For front CV axle half-shafts on a FWD or AWD Nissan Murano, replacing both sides is not required but is worth considering if both shafts have similar mileage and one shows wear — it avoids a repeat job in the near future.
Will a bad drive shaft throw a check engine light on a Nissan Murano?
Not usually. A worn drive shaft on a Nissan Murano causes mechanical symptoms — vibration, noise, loss of drive — rather than electrical faults. However, severe driveline vibration can occasionally disturb wheel speed sensors or ABS tone rings and trigger ABS or traction control warning lights as a secondary effect of the underlying shaft problem.

Shop drive shafts by year for the Nissan Murano

More parts for your Nissan Murano

Drive shafts for other Nissan models