Loading...
Starting at low prices, AutoBuffy stocks multiple engine crankcase vent valves from top OE-quality brands for your Nissan Nv1500. The crankcase vent valve (also called a PCV valve or CCV valve) routes blow-by gases from the engine crankcase back into the intake to be burned, keeping pressure from building up. A failed valve causes oil leaks, rough idle, and excess oil consumption.
The right crankcase vent valve for your Nissan Nv1500 depends on whether you want an OE-equivalent replacement, a heated unit for cold-climate reliability, or an upgraded check-valve design that resists sludge. Some engines use a simple one-piece PCV valve while others use a multi-piece CCV system with a separator, hoses, and heater element — make sure you match the correct configuration.
| Option | Best for | What you get |
|---|---|---|
| OE-equivalent (standard) | Most daily drivers replacing a failed valve on a well-maintained engine | Direct-fit replacement that restores factory crankcase ventilation; typically the lowest-cost option |
| Heated CCV valve/kit | Cold climates where moisture freezes inside the vent system, causing oil leaks or CEL | Integrated heating element prevents ice blockage; usually required on diesel and some turbocharged engines |
| Upgraded check-valve / separator kit | High-mileage engines or those with sludge history | Improved oil/air separation reduces oil consumption and protects the intake tract from contamination |
| OEM / dealer-sourced unit | Engines with known issues requiring exact OE calibration (common on European and turbocharged applications) | Guaranteed fitment and calibration; higher price but eliminates compatibility guesswork |
On most vehicles, replacing the crankcase vent valve involves removing the engine cover if present, disconnecting the vent hoses, unbolting or unclipping the valve or housing, and installing the new unit in reverse order. Inspect all connected hoses for cracks or oil buildup and replace them if they are brittle or collapsed. Snug all fittings and clamps to a firm, leak-free fit without over-tightening plastic housings.