Loading...

Nissan Versa Suspension Control Arm Links

Nissan Versa Suspension control arm links

Starting at low prices, AutoBuffy stocks multiple suspension control arm links from top OE-quality brands to fit your Nissan Versa. A control arm link connects the control arm to the stabilizer bar or subframe, controlling wheel alignment and absorbing road forces. When it wears out, handling becomes unpredictable and tire wear accelerates rapidly.

Signs your Nissan Versa needs a new suspension control arm link

  • Clunking or rattling noise from the front or rear suspension, especially over bumps or during slow turns
  • Excessive body roll when cornering, even at moderate speeds
  • Uneven or accelerated tire wear on the inner or outer edges of the tread
  • Loose or wandering steering feel, requiring constant small corrections to hold a straight line
  • Vibration through the steering wheel or floorboard that worsens on rough pavement
  • Visible wear, cracking, or torn rubber bushing on the link when inspected from underneath

Which suspension control arm link should you buy for your Nissan Versa?

Control arm links vary by position (front/rear, upper/lower, left/right) and construction quality, so confirming the exact location on your Nissan Versa before ordering is essential. The main decision is between OE-replacement rubber-bushed links and upgraded polyurethane or heavy-duty versions, depending on how the vehicle is used.

OE-Replacement (Rubber Bushing)
Best for
Daily drivers seeking factory-like ride quality
What you get
Matched compliance, quiet operation, and straightforward fitment at an affordable price
Heavy-Duty / Greaseable
Best for
Trucks, SUVs, or vehicles driven on rough or unpaved roads
What you get
Reinforced steel construction with grease fittings for extended service life under high stress
Polyurethane Bushing
Best for
Performance-oriented or spirited street drivers
What you get
Firmer feel, sharper handling response, and greater resistance to bushing deflection over time
Complete Kit (Pair)
Best for
High-mileage vehicles or those with worn suspension throughout
What you get
Both left and right links replaced at once, restoring balanced geometry and avoiding a repeat job soon after

Replacing suspension control arm links on a Nissan Versa

Moderate⏱ 1–2 hoursFloor jack and jack standsBreaker bar or impact wrenchSocket and ratchet set (metric and standard)Torque wrenchPenetrating oil (for corroded fasteners)

Replacing a control arm link on your Nissan Versa involves safely lifting and supporting the vehicle, removing the retaining bolts at each end of the link, and threading in the new link before torquing the fasteners to the manufacturer's specification with the suspension at ride height. Seized or corroded fasteners are the most common complication, so applying penetrating oil beforehand saves significant time. Schedule a four-wheel alignment after the job is complete.

Frequently asked questions

How much does it cost to replace suspension control arm links on a Nissan Versa?
Parts alone start at low prices for a single control arm link on your Nissan Versa. Labor typically adds one to two hours of shop time depending on accessibility and whether related hardware like bolts or bushings need replacement. Replacing links in pairs at the same visit lowers the overall labor cost per side.
How long do suspension control arm links last on a Nissan Versa?
Control arm links generally last anywhere from 50,000 to over 100,000 miles, but longevity depends heavily on road conditions, driving style, and bushing material. Vehicles frequently driven on rough, unpaved, or salted roads tend to wear links much faster. Inspect them at every tire rotation or alignment service.
Can I drive my Nissan Versa with a bad control arm link?
Driving with a failed control arm link is not recommended. A worn or broken link allows uncontrolled suspension movement, which directly affects steering response and wheel alignment. Continued driving can accelerate tire wear, damage adjacent suspension components, and in severe cases compromise vehicle control in emergency maneuvers.
Do I need an alignment after replacing control arm links on my Nissan Versa?
Yes, a wheel alignment is strongly recommended after replacing control arm links on your Nissan Versa. Links directly influence suspension geometry, and even a correctly installed new part can shift alignment angles slightly compared to the worn part it replaced. An alignment ensures even tire wear and proper handling after the repair.
Should I replace control arm links in pairs on my Nissan Versa?
Replacing control arm links in pairs — both left and right on the same axle — is generally the better approach. If one link has failed, the opposite side is typically at a similar mileage and wear level. Replacing both restores balanced suspension geometry and avoids returning to the same job within a short time.
How do I know if the control arm link or the control arm itself is bad on my Nissan Versa?
A control arm link failure usually presents as clunking or looseness at the bushing ends of the link, which can be isolated by carefully prying or pushing the link by hand during a visual inspection with the vehicle safely lifted. A failed control arm typically shows cracked welds, bent structure, or a deteriorated ball joint rather than worn link bushings.

More parts for your Nissan Versa

Tire Pressure Monitoring System (TPMS) Programmable SensorEngine Oil Cooler Mounting KitStrut MountClutch Starter Safety SwitchEngine Mount KitWheel Bearing & Hub AssemblyEngine Valve Cover GasketEngine Oil Pan

Suspension control arm links for other Nissan models

Nissan SentraNissan NV200