Loading...

Peterbilt 227 A/C Receiver Driers

Peterbilt 227 A/c receiver driers

Starting at $19.95, AutoBuffy stocks 8 A/C receiver driers from Four Seasons, UAC, and GPD for the Peterbilt 227. The receiver drier sits between the condenser and expansion valve, filtering moisture and debris from refrigerant. When it fails, contaminated or saturated desiccant circulates through the system, damaging the compressor and causing warm air output.

Signs your Peterbilt 227 needs a new A/C receiver drier

  • A/C blows warm or inconsistently cool air even after the system has been recharged
  • Visible moisture or frost buildup on A/C lines near the drier or expansion valve
  • Rattling or hissing noise from the A/C system caused by desiccant particles breaking loose inside the drier
  • A/C compressor cycles on and off rapidly or fails to engage due to contaminated refrigerant
  • Musty or chemical odor from the vents, indicating moisture or debris circulating through the system
  • A/C performance degrades quickly after a recharge, suggesting the desiccant is saturated and no longer absorbing moisture

Which A/C receiver drier should you buy for your Peterbilt 227?

The most important factors are OE fitment, desiccant type compatibility with your refrigerant, and whether the unit includes service ports and mounting brackets. A drier that does not match your system's refrigerant type or flow direction will reduce efficiency or fail prematurely. Most replacement driers fall into a few clear tiers.

OE-Equivalent (Direct Fit)
Best for
Straightforward replacement with no modifications
What you get
Exact inlet/outlet orientation, correct desiccant bag type, and hardware that matches original mounting points
OEM-Supplier Grade
Best for
Drivers wanting factory-level durability at a modest premium
What you get
Same manufacturer or spec as the original part, often used by dealerships, includes service ports and pre-installed o-rings
Universal / Fabrication Drier
Best for
Custom A/C builds or systems where the original drier is discontinued
What you get
Adjustable fittings, larger desiccant capacity, requires cutting and re-routing lines — not a bolt-on fit
Kit with Expansion Valve
Best for
Full system refresh after compressor failure or contamination flush
What you get
Receiver drier and expansion valve paired together, ensures both filtration points are replaced simultaneously to protect the new compressor

A/c receiver driers brands we stock for your Peterbilt 227

Four Seasons
6 options · from $27.95
UAC
1 option · from $19.95
GPD
1 option · from $55.95

Replacing the A/C receiver drier on a Peterbilt 227

Moderate⏱ 1–2 hoursA/C refrigerant recovery and recharge machineVacuum pump (if not integrated with recovery machine)Line disconnect tools or open-end wrenches for flare fittingsTorque wrench for fitting connectionsSafety glasses and gloves for refrigerant handling

Before removing the drier, the system must be fully evacuated by a certified recovery machine — releasing refrigerant into the atmosphere is illegal. Once the system is depressurized, disconnect the inlet and outlet lines, unbolt the drier from its mounting bracket, and install the new unit with fresh o-rings lightly coated in refrigerant oil. After installation, pull a deep vacuum on the system for at least 30 minutes to remove all moisture and air before recharging to the specified refrigerant capacity.

Frequently asked questions

How much does it cost to replace a/c receiver driers on a Peterbilt 227?
Parts start at $19.95 for the Peterbilt 227. Total cost including professional labor typically ranges higher, as the system must be evacuated and recharged with refrigerant after the swap. DIY installation saves the labor charge but requires an AC recovery machine and vacuum pump to handle refrigerant legally and safely.
Does the receiver drier need to be replaced every time the A/C system is opened?
Yes, in most cases. Any time the A/C system is opened to atmosphere — for a compressor replacement, condenser swap, or leak repair — the desiccant inside the receiver drier absorbs ambient moisture immediately. Reusing a saturated drier introduces that moisture back into the system, which accelerates corrosion and compressor wear.
Can a bad receiver drier damage the A/C compressor on a Peterbilt 227?
Yes. When the desiccant bag inside the drier degrades, it can release particles that circulate with the refrigerant oil throughout the system. These particles score the compressor's internal surfaces and clog the expansion valve orifice. Replacing a failed drier promptly — and flushing the system — is critical to protecting a new or existing compressor.
How long does an A/C receiver drier last on a Peterbilt 227?
Receiver driers generally last several years under normal conditions, but lifespan depends heavily on how often the system has been opened and local humidity levels. A drier in a high-humidity climate or a system that has been recharged multiple times will saturate faster. Most technicians recommend replacing it every time the system is opened for any major repair.
Is there a difference between a receiver drier and an accumulator?
Yes. A receiver drier is used in expansion-valve A/C systems and is located between the condenser and expansion valve on the high-pressure side. An accumulator performs a similar moisture-absorbing function but is used in orifice-tube systems and sits on the low-pressure side between the evaporator and compressor. The Peterbilt 227 will use one type or the other, not both.
Can I recharge my Peterbilt 227's A/C without replacing the receiver drier?
You can add refrigerant without replacing the drier, but if the system lost charge through a leak or was opened for repairs, skipping the drier replacement is a shortcut that often leads to repeat failures. A saturated drier cannot protect the system from moisture damage regardless of how much fresh refrigerant is added.

Shop a/c receiver driers by year for the Peterbilt 227

19941993199219911990

More parts for your Peterbilt 227

A/C CompressorHVAC Heater HoseRadiator Coolant HoseAlternator Brush SetHVAC Blower MotorHVAC System SwitchStarter Brush Holder AssemblyAlternator Connector

A/c receiver driers for other Peterbilt models

Peterbilt 386Peterbilt 348Peterbilt 388Peterbilt 337Peterbilt 377Peterbilt 220