Loading...

Peterbilt 348 Diesel Exhaust Fluid (DEF) Hoses

Peterbilt 348 Diesel exhaust fluid (def) hoses

Starting at $105.95, AutoBuffy carries 2 DEF hoses from Gates for the Peterbilt 348. The DEF hose routes diesel exhaust fluid from the tank to the SCR dosing system, keeping NOx emissions in check. A cracked or leaking hose triggers warning lights, reduces engine power, and can corrode nearby components with crystallized urea if ignored.

Signs your Peterbilt 348 needs a new DEF hose

  • DEF warning light or Check Engine light illuminated on the dashboard
  • White crystalline residue or dried urea deposits visible along the hose routing
  • Noticeable ammonia-like smell coming from underneath the vehicle
  • DEF tank level dropping faster than normal mileage should account for
  • SCR system fault codes stored, such as those related to DEF pressure or flow
  • Engine enters reduced-power or 'derate' mode limiting speed or RPM

Which DEF hose should you buy for your Peterbilt 348?

DEF hoses vary by position in the system, material construction, and whether they include integrated heating elements. Choosing the correct hose requires matching the specific line — supply, return, or vent — to your Peterbilt 348's configuration, since swapping an unheated line into a heated-line position will cause freezing failures in cold climates.

OE-Equivalent Replacement
Best for
Drivers who want a direct fit with no modifications
What you get
Matches original routing, fittings, and length; retains factory heated-line capability if equipped
Heated DEF Hose
Best for
Vehicles operated in cold climates where DEF can freeze
What you get
Integrated heating element prevents fluid freeze-up; required on lines that were originally heated from the factory
Unheated DEF Hose
Best for
Warm-climate use or vent/return lines not subject to freezing
What you get
Lower cost option for non-critical lines; not suitable as a substitute for factory-heated supply lines
Complete DEF Line Kit
Best for
High-mileage vehicles or those with multiple degraded lines
What you get
Replaces supply, return, and vent lines together; eliminates the need for multiple separate repairs

Diesel exhaust fluid (def) hoses brands we stock for your Peterbilt 348

Gates
2 options · from $105.95

Replacing the DEF hose on a Peterbilt 348

Moderate⏱ 1–2 hoursRatchet and socket setTrim panel removal toolsPliers for hose clampsCatch container for residual DEF fluidNitrile gloves and eye protection

Begin by locating the faulty hose using the fault code or visible leak as a guide, then depressurize the DEF system if your Peterbilt 348 uses a pressurized supply line before disconnecting any fittings. Route the new hose exactly as the original, ensuring it is secured away from heat sources and sharp edges, and reconnect all fittings until they click or seat firmly. After installation, clear any stored fault codes and run the engine through a full warm-up cycle to verify the DEF system reports no further faults.

Frequently asked questions

How much does it cost to replace DEF hoses on a Peterbilt 348?
DEF hoses for the Peterbilt 348 start at $105.95 for the part alone. Labor adds to the total depending on hose location — lines buried near the frame or under heat shielding take longer to access. Doing the job yourself keeps costs near the part price; a shop will typically charge additional labor on top of that.
Can I drive my Peterbilt 348 with a leaking DEF hose?
Short drives are possible, but it is not recommended. A leaking DEF hose will trigger fault codes and eventually cause the engine to enter a derate mode that limits speed or power. Continued driving also allows crystallized urea to accumulate and corrode wiring harnesses, connectors, and nearby metal components, turning a simple hose replacement into a larger repair.
What causes DEF hoses to fail on a Peterbilt 348?
The most common causes are heat cycling, age-related brittleness, and urea crystallization inside the line. DEF is mildly corrosive and will degrade hoses not specifically rated for it. Freeze-thaw cycles in cold climates accelerate cracking, especially in unheated lines. Physical abrasion from nearby components and improper routing during a previous repair are also frequent contributors.
How do I know which DEF hose my Peterbilt 348 needs — supply, return, or vent?
Start by locating the leak or the stored fault code, which will usually point to a specific line. The supply hose runs from the DEF tank to the dosing pump, the return line sends unused fluid back to the tank, and the vent line manages pressure. Use your Peterbilt 348's VIN when ordering to confirm the correct position and whether heating is required.
Will a DEF hose from an aftermarket brand work as well as OEM on a Peterbilt 348?
Yes, provided the hose is manufactured from DEF-compatible materials such as HDPE or stainless-lined tubing and matches the factory routing and connector style. Brands like Gates produce lines engineered to OE specifications. Avoid generic fuel hose or coolant hose substitutes — standard rubber degrades quickly when exposed to urea-based fluid.
How long does a DEF hose typically last on a Peterbilt 348?
DEF hoses generally last several years under normal conditions, but lifespan varies widely based on climate, mileage, and how often the DEF system cycles. Vehicles in cold climates that lack heated lines, or those that sit unused for extended periods allowing DEF to crystallize, tend to see earlier failures. Inspect lines any time you service the SCR system.

Shop diesel exhaust fluid (def) hoses by year for the Peterbilt 348

20122011

More parts for your Peterbilt 348

A/C Evaporator CoreA/C Receiver DrierHVAC Blower MotorEngine Air FilterA/C Clutch Cycle SwitchCabin Air FilterHVAC Blower Motor ResistorAccessory Drive Belt Pulley

Diesel exhaust fluid (def) hoses for other Peterbilt models

Peterbilt 389Peterbilt 567Peterbilt 388Peterbilt 387Peterbilt 210Peterbilt 587