Loading...

Plymouth Conquest Engine Crankcase Breather Elements

Plymouth Conquest Engine crankcase breather elements

Starting at low prices, AutoBuffy stocks multiple engine crankcase breather elements from top OE-quality brands. This filter separates oil mist from blow-by gases before they recirculate through the PCV system. When it clogs, pressure builds inside the crankcase, forcing oil past seals and gaskets — leading to leaks, rough idle, and accelerated engine wear.

Signs your Plymouth Conquest needs a new crankcase breather element

  • Oil leaking from valve cover gaskets, rear main seal, or other crankcase seals due to elevated internal pressure
  • Rough or unstable idle caused by unmetered air entering the intake through a cracked or bypassed breather
  • Oily residue or sludge buildup around the air filter housing or intake tube where the breather hose connects
  • Visible white or bluish smoke from the exhaust at idle, indicating oil mist passing through the intake and burning in the cylinders
  • Check Engine light with codes related to lean fuel trim or PCV system performance (common when airflow is disrupted)
  • Excessive oil consumption between changes with no obvious external leak, as pressurized mist escapes past compromised seals

Which crankcase breather element should you buy for your Plymouth Conquest?

The main decision is whether to match OEM filtration quality, upgrade to a reusable unit, or stick with a budget replacement. Filter media type and housing compatibility matter most — an ill-fitting element won't seal correctly, defeating the part's purpose entirely.

OEM-equivalent paper/foam element
Best for
Owners wanting a direct, no-hassle replacement that meets factory specs
What you get
Matched fitment, correct flow restriction, disposable — replace on schedule
Reusable oiled cotton gauze element
Best for
Higher-mileage engines or those in dusty environments needing better filtration longevity
What you get
Washable and re-oilable, better oil mist capture, longer service life between replacements
Integrated breather/separator assembly
Best for
Vehicles where the element is housed inside a sealed oil separator unit sold as one piece
What you get
Complete unit replacement ensures housing seals and baffles are also fresh — eliminates guesswork
Performance baffled catch-can element
Best for
Enthusiasts or modified engines producing higher blow-by volume than stock
What you get
Added oil separation before gases re-enter intake, keeps intake valves cleaner, reduces oil consumption

Replacing the crankcase breather element on a Plymouth Conquest

Easy⏱ 30–60 minutesFlathead and Phillips screwdriversPliers or hose clamp pliersSocket set with extensionsClean shop ragsNitrile gloves

Locate the breather housing on the valve cover or intake system, disconnect the hose connections, and remove the housing cover or retaining clips to access the element. Pull out the old element, wipe the housing interior clean of any oil residue, and seat the new element firmly before reassembling. Snug all clamps and connections by hand first, then confirm there are no air leaks at idle before closing the hood.

Frequently asked questions

How much does it cost to replace crankcase breather elements on a Plymouth Conquest?
Parts start at low prices on AutoBuffy. The element itself is inexpensive, and most are a straightforward DIY replacement taking under an hour. If a shop handles it, expect to pay one to two hours of labor on top of the part cost, depending on how accessible the breather housing is on your specific engine.
How often should I replace the crankcase breather element on my Plymouth Conquest?
Most manufacturers recommend inspecting the breather element every 30,000 to 60,000 miles and replacing it whenever it appears clogged, saturated with oil, or deteriorated. Engines with higher blow-by — older, high-mileage, or modified units — may need more frequent replacement. Always check your owner's manual for the factory-recommended interval.
Can a clogged breather element damage my Plymouth Conquest's engine?
Yes. A blocked crankcase breather element traps blow-by gases inside the crankcase, raising internal pressure. That pressure forces oil past gaskets and seals, causing leaks and oil consumption. Over time, the contaminated gases also accelerate sludge buildup and can degrade intake components if unfiltered mist bypasses the element entirely.
Is the crankcase breather element the same as the PCV valve on a Plymouth Conquest?
They are separate but work together. The breather element filters oil mist from blow-by gases before they re-enter the intake or vent to atmosphere. The PCV valve controls the flow rate of those gases. A clogged breather element puts extra stress on the PCV valve and can cause both components to fail prematurely if not addressed.
Can I clean and reuse my Plymouth Conquest's crankcase breather element instead of replacing it?
It depends on the element type. Reusable cotton gauze or foam elements can be carefully cleaned with appropriate solvent, dried fully, and re-oiled before reinstallation. Disposable paper or felt elements should always be replaced — cleaning them compromises their filtration structure and risks pushing trapped oil mist or debris directly into the intake.
Will a faulty crankcase breather element cause my Plymouth Conquest to fail an emissions test?
It can. A clogged or failed breather element disrupts the closed crankcase ventilation system, which is emissions-controlled on most modern vehicles. This can trigger fuel trim faults or a Check Engine light, both of which typically result in an automatic emissions test failure. Replacing the element often resolves these codes without additional repairs.

More parts for your Plymouth Conquest

Auxiliary Engine Cooling Fan RelayStarter BushingTransmission MountEngine Timing Chain KitAccessory Drive Belt Idler PulleyStrut Mount KitStarter RelayRadiator Cap

Engine crankcase breather elements for other Plymouth models

Plymouth Arrow PickupPlymouth SapporoPlymouth ReliantPlymouth AcclaimPlymouth Grand VoyagerPlymouth Sundance