Loading...
Steering idler arms for your Plymouth Pb350 start at $18.95, with 9 options in stock from SKP, Delphi, and Dorman. The idler arm is a pivot point on the passenger side of the steering linkage that mirrors the pitman arm, keeping the center link level and stable. When it wears out, you lose precise steering control and accelerate tie rod and center link wear.
The main decision is between OE-replacement and heavy-duty or greaseable units. Vehicles used for towing, off-roading, or high-mileage daily driving benefit from a greaseable idler arm that allows ongoing lubrication to extend service life beyond the original part. Check whether your Plymouth Pb350 uses a standard fixed idler arm or an adjustable one before ordering.
| Option | Best for | What you get |
|---|---|---|
| OE-Replacement (sealed) | Normal daily driving on a stock Plymouth Pb350 | Factory-spec fit and geometry, no maintenance required, typically the most affordable option |
| Heavy-Duty / Greaseable | Towing, off-road use, or high-mileage Plymouth Pb350 | Reinforced housing with a grease fitting so you can relubricate the joint and extend service life |
| Adjustable Idler Arm | Plymouth Pb350 models that require center link height adjustment for alignment | Allows you to set the correct center link angle after installation, restoring factory steering geometry |
| OEM / Dealer-Grade | Plymouth Pb350 still under warranty or requiring exact OEM specification | Exact original dimensions and materials, often with full manufacturer warranty coverage |
After raising and securing the Plymouth Pb350, remove the cotter pin and castellated nut securing the idler arm stud to the center link, then use a separator tool to break the taper — avoid hammering directly on the stud. Unbolt the idler arm bracket from the frame, transfer any hardware to the new unit, and reinstall in reverse order, tightening fasteners to the manufacturer's specification range. A wheel alignment is required before returning the Plymouth Pb350 to normal driving.