Loading...
Engine camshaft seals for your Plymouth Voyager start at low prices, and AutoBuffy stocks multiple options from top OE-quality brands. The camshaft seal is a small rubber or PTFE ring that prevents oil from leaking out of the front or rear of the camshaft journal. When it fails, oil escapes onto belts, pulleys, or the timing cover, leading to rapid belt degradation, low oil levels, and potential engine damage if ignored.
The main decisions are seal material and whether you need the front seal, rear seal, or a complete kit covering both. Material choice matters most: rubber seals suit standard driving, while PTFE lip seals handle higher heat and last longer under performance or high-mileage conditions. Always confirm the position — front or rear — and whether your Plymouth Voyager uses a single or dual cam layout before ordering.
| Option | Best for | What you get |
|---|---|---|
| OEM-equivalent rubber seal | Stock replacements on Plymouth Voyager with normal mileage and standard driving | Factory-spec fit, reliable sealing at operating temperature, cost-effective single-position replacement |
| PTFE lip seal (Teflon-coated) | High-mileage Plymouth Voyager engines or those running in extreme heat conditions | Superior heat resistance, lower friction on the cam journal, longer service life than standard rubber |
| Front camshaft seal | Plymouth Voyager engines where the cam drives the timing belt or chain at the front of the head | Seals the drive-end of the camshaft; typically replaced whenever the timing belt is serviced |
| Complete cam seal kit (front + rear) | Full reseal jobs or engines showing oil seepage at both ends of the camshaft | Both seals in one purchase, ensures both ends are addressed and eliminates a second labor visit |
Replacing the camshaft seal on a Plymouth Voyager requires removing the timing cover and, in most cases, the timing belt or chain to access and pull the old seal from the cam journal. The new seal should be lightly lubricated with clean engine oil on its lip before being pressed or driven in flush and square to avoid damage. Reassemble carefully in reverse order, verifying cam timing marks are aligned correctly before starting the engine.